Formation and stability of barium aluminate and cerate in NOx storage-reduction catalysts

The formation and stability of BaAl₂O₄ and BaCeO₃ in Pt-Ba/Al₂O₃ and Pt-Ba/CeO₂ based NO_x storage-reduction (NSR) catalysts has been investigated using kinetic measurements, X-ray diffraction, thermal analysis and X-ray absorption spectroscopy. In as-prepared state, the Ba-component in the NSR catalysts was made up of amorphous BaO and BaCO₃. The formation of BaAl₂O₄ started above 850 °C, whereas the formation of BaCeO₃ was already observed at 800 °C and was faster than that of BaAl₂O₄. The stability of BaAl₂O₄ and BaCeO₃ in various liquid and gaseous atmospheres was different. BaAl₂O₄ was rapidly hydrated at room temperature in the presence of water and transformed to Ba(NO₃)₂ and γ-alumina in the presence of HNO₃, whereas BaCeO₃ was decomposed to much lower extent under these conditions. Interestingly, BaCeO₃ was transformed to Ba(NO₃)₂/CeO₂ in the presence of NO₂/H₂O at 300–500 °C. Also, the presence of CO₂ led to decomposition of barium cerate, which has important consequences for the catalyst ageing under NO_x-storage conditions and can be exploited for regeneration of thermally aged NSR-catalysts.     

Kinetic studies on copolycondensation processes. VI. Influence of copolycondensation temperature on tetrad distribution of the PDT/FT aromatic copolyterephthalate by 1H-NMR spectroscopy

¹H-NMR and Eu(fod)₃ lanthanide shift reagent were used to determine tetrad distribution of comonomer units of the PDT/FT copolyterephthalate obtained from terephthaloyl chloride (intermonomer) and 3,3′-dimethylbisphenol A and phenolphtalein (comonomers). Computer simulations of the terephthalic proton signal split into the lines of compositional tetrads were performed to obtain quantitative data. To characterize the microstructure of the copolymer samples synthesized at different temperatures, the degree of randomness and the degree of alternation were calculated. It was shown that the latter can differentiate the chains which seemed to be identical concerning the diad distribution only.     

Surface and interfacial FTIR spectroscopic studies of latexes. IX. The effect of homopolymer and copolymer structures on surfactant mobility in Sty/BA latices

The effects of homopolymer and copolymer compositions and structures in styrene/n-butyl acrylate (Sty/BA) latices on sodium dioctyl sulfosuccinate (SDOSS) surfactant mobility and its preferential concentration at the film–air (F–A) and film–substrate (F–S) interfaces were examined using attenuated total reflectance Fourier transform infrared (ATR FTIR) spectroscopy. It appears that the SDOSS concentration at the F–S interface is highest when the Sty/BA feed ratio is 50/50, and the excess of Sty results in migration of SDOSS surfactant to the F–A interface. This behavior is attributed to the increased glass transition temperature and diminished compatibility between surfactant molecules and copolymer latex. This study also shows that the primary factors that influence exudation to either F–A or F–S interfaces are surface tension of the substrate, glass transition temperature, water flux during coalescence, and compatibility between latex components. © 1995 John Wiley & Sons, Inc.     

The behaviour of high polar organic solvents at platinum electrode — II. Adsorption and electrode reactions of acetonitrile

The adsorption of acetonitrile and reduction of adsorbed molecules at platinized platinum electrode were studied by potentiodynamic and radiometric techniques. During acetonitrile adsorption the reversibly and irreversibly adsorbed species are formed. One electron reduction process occurs in the potential range 0.45-0.15 V. Below 0.15 V the deeper reduction of adsorbed acetonitrile takes place — the final products are ammonia and ethane. The differences of smooth and platinized platinum electrodes properties are briefly discussed.     

The assessment of microorganism growth in the membrane distillation system

Growth of microorganism in the membrane distillation (MD) system has been evaluated, and their presence on the membrane surface was studied using scanning electron microscopy (SEM) coupled with energy dispersion spectrometry (EDS). The membrane samples were collected from MD modules used for the following applications: concentration of salts and acids, production of demineralized water from tap water, separation of ethanol from fermentation broth in a membrane bioreactor and treatment of saline wastewater containing Pseudomonas and Streptococcus faecalis bacteria and Penicillium and Aspergillus fungi. The MD experiments were performed with polypropylene capillary membranes. SEM examinations of the membranes used for the treatment of saline wastewater indicated a significant amount of S. faecalis bacteria and Aspergillus fungi. The polypropylene membranes used did not reject S. faecalis bacteria, which were detected on the membrane surface on the distillate side. The presence of fungi in the membrane pores was observed only on the feed side. The contamination of the membrane surface by yeast cells was not observed in the case of the membrane bioreactor operated over one year. The running conditions of the MD process (such as elevated temperature, significant salt concentrations and low pH values) inhibited the growth of microorganism in the MD system.     

Empathy and Modern Technology: A Neuroergonomics Perspective

The primary purpose of this paper is to discuss the role of empathy in the design of advanced systems in manufacturing and service industries in order to ensure suitable working conditions for employees from the social and technological point of view. The origins and components of empathy are briefly reviewed. The neural underpinnings of three components of empathy, including cognitive, emotional, and behavioral aspects, are considered in the context of human–human and human–machine interactions, as well as design of working environments. Finally, the potential advantages of applying empathy‐related knowledge to the design and development of human‐centered technology are discussed.     

Studies on a New Concept of 3D Data Integration about Reaches and Forces of a Disabled Person on a Wheelchair (CAD Methods in Car and Market Ergonomics)

The article presents a new concept of combining the three dimensions (3D) of a person's manipulation space. The data concern information about the reach of the arms and biomechanical data about limiting the load of a disabled person sitting in a wheelchair. Measurement data were acquired empirically, on original measuring station. The data included, respectively, arms' reach (static and dynamic) or, alternatively, measurements of limiting forces. The obtained data were processed into virtual 3D surfaces of arms' reach and forces. These surfaces provide the required graphic model of anthropotechnical and biomechanical data. Developed model was utilized to perform a virtual analysis of the accessibility of a disabled person to technical means: in a market sale space and in the ergonomic analysis into the space of a personal car. The presented method of 3D graphic modeling of anthropometrical and biomechanical data can be universally applied in ergonomic designing of work stations not only for disabled persons. © 2011 Wiley Periodicals, Inc.     

Explicit formulae for completions of linear time varying singular systems of differential equations

Completions of linear time varying singular systems of the formE(t)x(t)+F(t)x(t)=f(t) are explicitly computed using recent results on rational matrix functions. The algorithm and the theory behind it are carefully described. Computational issues are discussed.Research supported in part by the U.S. Army Research Office under DAAL03-89-D-0003, and the National Science Foundation under ECS-9012909.