鼓风引射式燃气燃烧器的计算

提出鼓风式射式燃气燃烧器的基本计算公式与计算结果，并进行结构尺寸与工况分析，确定各种因素对其的影响程度。     

LaK747/509璃璃配方的研究

本工作中我们选择了B₂O₃-La₂O₃-Y₂O₂-ZrO₂系统作为玻璃基础组成。最后获得的LaK747/509玻璃组成中,不含有钍的成份。由于该玻璃具有一系列好的性质,如析晶范围窄、析晶速度慢以及粘度大等等,因此可以成功地在12-30L铂埚中进行熔制,并获得了尺寸为φ200×25mm的高质量玻璃。     

鸭池河水电站压力钢管外压稳定性设计

采用解析法和半解析有限元法分别对鸭池河水电站埋藏式加劲压力钢管进行外压稳定性计算。在计算分析过程中,考虑了初始缺陷因素对埋藏式加劲压力钢管抗外压稳定性的影响,使得计算结果更加接近于工程实际;从而为埋藏式加劲压力钢管的外压稳定性计算提出了一种更加行之有效的方法。     

正丁基硫醇-正辛烷体系等压气液相平衡研究

利用双循环气液平衡釜测定了101.3 kPa下正丁基硫醇-正辛烷体系的气液平衡数据,并运用该实验结果,进一步获得组分的液相活度系数。实验数据经Herrington方法检验符合热力学一致性。用UNIQUAC热力学模型对该实验数据进行处理,计算结果与实验值的平均绝对偏差为0.050 5。     

再谈过度包装

过度包装作为一种虚假的、不合理的包装在当下仍有市场。按市场的规律去追溯,其原因在于生产者、设计者、消费者、决策者4个方面。文章从生产者的失信行为、设计者的伦理道德、消费者的虚荣心理、决策者的法规建制方面进行了阐述,指出通过社会各界的合力,结合国外的成例,中国的包装业将会进入合理、适度包装的良性循环发展阶段。     

Low temperature and strain rate dependence of fracture stress and fracture toughness on thin Fe40Ni40B20 amorphous ribbon

The fracture stress and the critical stress intensity factor of the Fe₄₀Ni₄₀B₂₀ amorphous metallic ribbons 20 μm thick were measured in the temperature range 4.2–300 K and at deformation rates from 3.3×10⁻⁶ to 1.25×10⁻³ m⁻¹ with the aim to obtain more information on the condition for the onset and development of the inhomogeneous plastic deformation and fracture.     

建(构)筑物机械拆除方法综述

介绍了几种常用的建(构)筑物机械拆除方法,对其工作原理、特点、应用条件及局限性加以分析和说明。     

In_（0．2）Ga_（0．8）As／GaAs应变多量子阱结构的光调制反射和热调制反射谱的研究

对Ｉｎ（０．２）Ｇａ（０．８）Ａｓ／ＧａＡｓ应变多量子阱在７７Ｋ下的光调制反射谱（ＰＲ）和热调制反射谱（ＴＲ）进行了实验研究．对ＰＲ结果的线形拟合指认了应变多量子阱中子能级的跃迁，并与理论计算结果作了比较．实验对比确认ＰＲ中１１Ｈ、１３Ｈ等跃迁结构为非耦合态、具有电场调制机构的一阶微商性质．而１１Ｌ、３１Ｈ、２２Ｈ等跃迁结构为阶间耦合态，对这些隧穿耦合的低场调制产生三阶微商特性．     

Process integration in CASE environments

Research in CASE environments has focused on two kinds of integration: tool and object. A higher level of integration, process integration, which represents development activities explicitly in a software process model to guide and coordinate development and to integrate tools and objects, is proposed. Process integration uses software process models (SPMs) a process driver, a tool set, and interfaces for both developers and managers to form the backbone of a process-driven CASE environment. The developer's interface, a working environment that lets developers enact an SPM, and the manager's interface which gives managers and analysts the tools to define, monitor, and control the SPMs that developers are working on concurrently are discussed. The Softman environment experiment, an implementation of process-driven CASE environments with existing CASE environments, is reviewed