原子转移自由基聚合研究进展

综述了原子转移自由基聚合的研究进展。     

BOPP珠光膜及其生产工艺

详细介绍了BOPP珠光膜的特性和生产工艺,特别指出了BOPP珠光膜生产中的难点和排除方法,对实际生产有相当的价值.     

9,9-双(羟甲基)芴的合成工艺研究

以芴为原料，经甲醛羟甲基化反应合成了新型给电子体1，3-双醚的前体，总收率达65％，并对生产工艺进行了优化研究。     

掏槽法在黄麦岭磷矿掘双壁沟爆破中的应用

在黄麦岭磷矿露天开采的掘沟爆破中，根据掏槽法的机理，使用大孔径深孔掏槽，采用多排微差挤压爆破，一次形成开采所需的双壁沟，提高了掘沟效率，扩大了掏槽法的应用范围。     

催化偶联法合成2-氰基-4''''-甲基联苯的工艺研究

用对氯甲苯和镁粉在微量碘引发下反应制得的格氏试剂对甲苯基氯化镁和邻氯苯腈在二氯化锰的作用下经催化偶联,得到制备沙坦类抗高血压药物的中间体2-氰基-4’-甲基联苯,通过正交实验法筛选出最佳工艺条件,收率82.9%。     

肥料磷铵溶解净化法的研究

在湿法磷酸净化中,氨化对多种杂质有沉淀去除作用,由此提出了肥料磷铵溶解净化法,用于制备生产各种精细磷化工产品的优质磷源,过滤所得残渣可返回肥料系统,不造成磷损失。以粉状磷酸一铵为原料,考察了不同温度、固液比、搅拌时间和搅拌速度对溶解浸出法溶出率、溶出液中P2O5含量的影响。通过单因子试验和正交试验,筛选出了适宜的工艺条件为:溶解温度70℃,固液比0.7,搅拌时间8min,中速搅拌,溶出率和溶出液中P2O5质量分数分别达67.04%和19.78%,铁和氟的去除率分别达99%和97%以上。     

Experimental Study on Phase Transformation Between MgB2 and MgB4

Using X-ray diffraction (XRD), scanning electron microscope (SEM), and differential scanning calorimetry (DSC), we have investigated the reaction between MgB₄ and Mg in its solid, liquid, and gas physical states. The XRD results indicate that the reaction of MgB₄+Mg=2MgB₂ always occurs independently of the different states of Mg. DSC measurements show that the solid–solid reaction MgB₄( s )+Mg( s )=2MgB₂( s ), the Mg melting Mg( s )→Mg( l ), and the Mg volatilization occur in turn with increasing temperature for mixed (MgB₄+Mg) powder with a nominal stoichiometry of MgB₂. SEM observations indicate that the resulting synthesized MgB₂ samples, obtained from the MgB₄+Mg mixtures, have a denser microstructure than those obtained directly from Mg+B mixtures. On the basis of XRD, DSC, and SEM results, a kinetic model for the reaction between MgB₄ and Mg is proposed.     

Potential thread-level-parallelism exploration with superblock reordering

The growing number of processing cores in a single CPU is demanding more parallelism from sequential programs. But in the past decades few work has succeeded in automatically exploiting enough parallelism, which casts a shadow over the many-core architecture and the automatic parallelization research. However, actually few work was tried to understand the nature, or amount, of the potentially available parallelism in programs. In this paper we will analyze at runtime the dynamic data dependencies among superblocks of sequential programs. We designed a meta re-arrange buffer to measure and exploit the available parallelism, with which the superblocks are dynamically analyzed, reordered and dispatched to run in parallel on an ideal many-core processor, while the data dependencies and program correctness are still maintained. In our experiments, we observed that with the superblock reordering, the potential speedup ranged from 1.08 to 89.60. The results showed that the potential parallelism of normal programs was still far from fully exploited by existing technologies. This observation makes the automatic parallelization a promising research direction for many-core architectures.     

基于亲水/憎水复合膜的全热交换器换热换湿性能[

膜全热交换器由于可以同时回收空调排风中的潜热和显热而受到重视。研究了基于PVAL/PVDF复合透湿膜的全热交换器的透热透湿性能，实验测定了新风与排风之间的显热交换能力和水蒸气交换能力，并建立了基于亲水/憎水复合膜的逆流膜全热交换器传热传质计算模型，实验与理论结果吻合较好。结果表明，该复合膜全热交换器的总传热系数为20～35 W·m-2·℃-1，总传质系数为（1.5～3.5）×10-3 m·s-1。     

固体颗粒对三相气升式环流反应器流动特性的影响

将液相视为连续相,气相和固相视为分散相,同时考虑各相之间的相互作用,结合气液固三相流体的动力学理论,建立气液固三相环流反应器三流体湍流流动的Eulerian模型.采用计算模拟软件Fluent对三相环流反应器的流动状况进行模拟,考察表观气速、固含率、颗粒大小对反应器的气含率以及液体流动速度的影响.模拟结果较好地解释了气升式环流反应器内的三相流体行为,模型与实验结果较好地吻合,表明了模型的可行性.