Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

Structural Characterization of Different Asphaltenes of Kuwaiti Origin

Asphaltenes obtained by precipitation from crude Kuwaiti oils have been analyzed by proton magnetic resonance (¹H-NMR), carbon-13 nuclear magnetic resonance (¹³C-NMR) and Infrared (IR) spectral techniques. The molecular weight and elemental analysis were also determined. These combined analytical data were used for the characterization of these Kuwaiti oils. The asphaltenes molecular weights range from approximately 4200-6500 with an H/C ratio of 0.91-1.1 with an average 45-71% aromatic carbons. The average side chain length was of 4-6 carbons. It can also be concluded that the asphaltenes under investigation contain 5-9 sets of condensed aromatic rings joined together by bridges of alkyl chains or other hetero atoms and the average number of each of these sets of condensed aromatic rings is nearly 7. There are a number of alicyclic rings and condensed alicyclic rings in asphaltene. The IR spectra showed main molecular groups including OH, NH, SH, C=O and aliphatic and aromatic C-H's.     

A Unified Framework for Designing, Implementing and Visualizing Distributed Algorithms

We present a general method and a toolkit for designing, implementing and visualizing distributed algorithms. We make use of the high level encoding of distributed algorithms as graph rewriting systems. The result is a unified and simple framework for describing, implementing and visualizing a large family of distributed algorithms.     

Geochemical approach to the Bou Hadjar hydrothermal system (NE Algeria)

The Bou Hadjar low-temperature hydrothermal system is located in northeast Algeria. The four main thermal springs that are the subject of the study emerge ith temperatures between 32 and 60°C from allochthonous formations. The reservoir temperature has been estimated from chemical compositions by utilizing simultaneously the silica, gas and sulfate-water oxygen isotope geothermometers, fluid-mineral equilibrium calculations, and a mixing model. According to these thermometric methods, the most probable subsurface temperature is in the range 75–106°C. The mixing model suggests a temperature of 125°C for the parent water.     

Axisymmetric fracture mechanics analysis by the boundary integral equation method

The boundary integral equation (BIE) method of numerical stress analysis is shown to be a powerful technique for solving axisymmetric fracture mechanics problems of the types encountered in practice in pipes, tubes and pressure vessels. Comparisons with established analytical and finite element solutions for problems involving circumferential and penny-shaped cracks in round bars, spheres and hollow cylinders show that accurate values of stress intensity factors at the tips of cracks can be obtained by this method. The main advantage of the technique over the finite element method is the much reduced amount of labour required to prepare the mesh data, since in the BIE approach only the boundary of an axisymmetric component needs to be discretised into simple and relatively coarse line elements.     

Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Thermal stability in bulk ultrafine-grained (UFG) 5083 Al that was processed by gas atomization followed by cryomilling, consolidation, and extrusion, and that exhibited an average grain size of 305 nm, was investigated in the temperature range of 473 to 673 K (0.55 to 0.79 T _m , where T _m is the melting temperature of the material) for different annealing times. Appreciable grain growth was observed at temperatures > 573 K, whereas there was limited grain growth at temperatures < 573 K even after long annealing times. The values of the grain growth exponent, n, deduced from the grain growth data were higher than the value of 2 predicted from elementary grain growth theories. The discrepancy was attributed to the operation of strong pinning forces on boundaries during the annealing treatment. An examination of the microstructure of the alloy suggests that the origin of the pinning forces is most likely related to the presence of dispersion particles, which are mostly introduced during cryomilling. Two-grain growth regimes were identified: the low-temperature region (<573 K) and the high-temperature region (>573 K). For temperatures lower than 573 K, the activation energy of 25 ± 5 kJ/mol was determined. It is suggested that this low activation energy represents the energy for the reordering of grain boundaries in the UFG material. For temperatures higher than 573 K, an activation energy of 124 ± 5 kJ/mol was measured. This value of activation energy, 124 ± 5 kJ/mol, lies between that for grain boundary diffusion and lattice diffusion in analogous aluminum polycrystalline systems. The results show that the strength and ductility of bulk UFG 5083 Al, as obtained from tensile tests, correlate well with substructural changes introduced in the alloy by the annealing treatment.     

Production of fungal enzymes and proteins from high salt cheese wheys

A fermentation procedure using wheys from buffalo milk, sweet rennet and salted wheys containing up to 15% NaC1, and based on the selection of salt-tolerant fungal cultures for production of microbial proteins and some economically important enzymes, is described. Certain strains of Aspergillus flavus, A. niger, A. ochraceus and A. terreus gave yields of mycelium ranging between 1.5 and 30 g on a dry weight basis. Strong proteolytic activities were exhibited by A. ochraceus, A. flavus and, to a lesser extent, by A. niger in the presence of salt up to 10% as final concentration. Powerful milk-clotting activities were also detected in culture supernatants of A. flavus and A. ochraceus. Extracellular β-galactosidases were released in to the culture fluids of these fungal strains with variable activities, depending upon the salt content of the growth medium. The application of the procedure is discussed.