Mutations in the N-terminal globular domain of the type X collagen gene (COL10A1) in patients with Schmid metaphyseal chondrodysplasia

STATEMENT OF PROBLEM: Improved dental stone has been widely used for producing dies for the fabrication of restorations with the lost-wax technique. Improved dental stone is used for several reasons, but it is selected most often because of its reasonable cost, ease of use, and ability to produce consistent results. PURPOSE: This study evaluated the ability of an epoxy resin die material and a type IV dental stone to dimensionally reproduce a custom-fabricated metal die. MATERIAL AND METHODS: Dies were fabricated and measurements were made from three reference lines. Measurements were repeated three times for the master die and for the specimen dies. A mean measurement and percent relative change for each dimension was calculated. RESULTS: A significant difference in the relative change for die height was found between the groups studied (p < 0.003). CONCLUSIONS: This epoxy die system will provide a degree of dimensional accuracy comparable to gypsum when used with addition silicone impression material.     

Geographic distribution of medical supplies and the numbers of hospital inpatients in the secondary medical areas in Japan

A secondary medical area is defined as a medical administrative area under the Medical Care Law by which every prefectural government is expected to provide general medical care supplies such as beds for inpatients. This study evaluated the distribution in medical supplies among the secondary medical areas in Japan and the correlation between medical supply and demand. The numbers of hospital inpatients (residence of patients), physicians, and general beds excluding those for mental disorders and tuberculosis were analysed in relation to the population in all secondary medical areas in Japan. Those data were obtained from surveys conducted by the Ministry of Health and Welfare. The main results were as follows; 1) The distribution of physicians and general hospital beds among the secondary medical areas was not equal. 2) Even adjusted for the sex and age distribution, the highest hospital inpatients/population ratio among the secondary medical areas was four times as large as that of the lowest. 3) With multiple regression models, two independent variables (normal hospital beds/population ratio and aged 65 and over/total population ratio) accounted about 60% of the variance in hospital inpatients/population ratio. 4) The differences in medical supplies among the secondary medical areas may cause the differences in hospital inpatients/population ratio.     

A far-infrared spectroscopic study of low temperature soft phonon mode in Tris-Sarcosine Calcium Chloride(TSCC)

Temperature dependences of the soft phonon frequency and the damping constant in Tris-Sarcosine Calcium Chloride (TSCC) single crystal have been investigated between 5K and 100K by using a Fourier-transform far-infrared spectrometer. It has been observed that the soft phonon frequency decreases gradually and the damping constant increases as the transition temperature is approached from below The damping constant varies from 7cm^-1 a 90K to less than 0.5cm^-1 at 5K. It has been found that the damping constant is approximately proportional to temperature below about 60K.     

A 1-Gb/s/pin 512-Mb DDRII SDRAM using a digital DLL and a slew-rate-controlled output buffer

A 1-Gb/s/pin 512-Mb DDRII SDRAM has been developed using a digital delay-locked loop (DLL) and a slew-rate-controlled output buffer. The digital DLL has a frequency divider for DLL input, performs at an operating frequency of up to 500 MHz at 1.6 V, and provides internal clocking with 50% duty-cycle correction. The DLL has a current-mirror-type interpolator, which enables a resolution as high as 14 ps, needs no standby current, and can operate at voltages as low as 0.8 V. The slew-rate impedance-controlled output buffer circuit reduces the output skew from 107 to 10 ps. This SDRAM was tested using a 0.13-/spl mu/m 126.5-mm/sup 2/ 512-Mb chip.     

An empirical approach for structure-based prediction of carbohydrate-binding sites on proteins

A computer program system was developed to predict carbohydrate-bindingsites on three-dimensional (3D) protein structures. The programssearch for binding sites by referring to the empirical rulesderived from the known 3D structures of carbohydrate–proteincomplexes. A total of 80 non-redundant carbohydrate–proteincomplex structures were selected from the Protein Data Bankfor the empirical rule construction. The performance of theprediction system was tested on 50 known complex structuresto determine whether the system could detect the known bindingsites. The known monosaccharide-binding sites were detectedamong the best three predictions in 59% of the cases, whichcovered 69% of the polysaccharide-binding sites in the targetproteins, when the performance was evaluated by the overlapbetween residue patches of predicted and known binding sites. Received April 24, 2003; revised June 2, 2003; accepted June 10, 2003.     

The metabolic anatomy of tremor in Parkinson's disease

OBJECTIVE: To identify regional metabolic brain networks related specifically to the presence of tremor in PD. BACKGROUND: The pathophysiology of parkinsonian tremor is unknown. Because tremor in PD occurs mainly in repose, we used resting state PET with 18F-fluorodeoxyglucose (FDG) to identify specific metabolic brain networks associated with this clinical manifestation. METHODS: We studied two discrete groups of eight PD patients with and without tremor using FDG/PET. Both patient groups were matched for gender, age, and Unified Parkinson Disease Rating Scale ratings for akinesia and rigidity. Ten normal volunteer subjects served as controls. RESULTS: Network analysis with the Scaled Subprofile Model was performed in two steps. 1) We computed the expression of the PD-related pattern (PDRP) identified by us previously in each of the PD patients and control subjects. Although PDRP subject scores were abnormally elevated in the combined PD cohort (p < 0.005), these values did not differ in the PD patient groups with and without tremor (p = 0.36). 2) We used SSM to analyze the data from the combined PD cohort comprising both patient groups. We found that PD patients with tremor were characterized by increased expression of a metabolic network comprising the thalamus, pons, and premotor cortical regions. Subject scores for this pattern were elevated in the tremor group compared with the atremulous patient group and the normal control group (p < 0.005). CONCLUSIONS: The findings suggest that PD patients with tremor are characterized by distinct increases in the functional activity of thalamo-motor cortical projections. Modulation of this functional anatomic pathway is likely to be the mechanism for successful interventions for the relief of parkinsonian tremor.