Energy-efficient design of a presbyopia correction wearable powered by mobile GPUs and FPGAs

The Journal of Supercomputing - This paper presents an energy-efficient design and evaluation of a novel portable device for the automatic correction of presbyopia in human eyes driven by the use...     

Photocatalytic activity of a new composite material of Fe (III) oxide nanoparticles wrapped by a matrix of polymeric carbon nitride and amorphous carbon

Polymeric carbon nitride was synthesized from urea and doped with Cu and Fe to act as co-catalysts. The material doped with Fe was a new composite material composed of Fe(III) oxides (acting as a co-catalyst) wrapped by the polymer layers and amorphous carbon. Furthermore, the copper doped material was described in a previous report. The photocatalytic degradation of the azo dye direct blue 1 (DB) was studied using as photocatalysts: pure carbon nitride (CN), carbon nitride doped with Cu (CN-Cu) and carbon nitride doped with Fe (CN-Fe). The catalysts were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), by X-ray photoelectron spectroscopy (XPS) and Brunauer–Emmett–Teller method (BET), etc. The adsorption phenomenon was studied using the Langmuir and Freundlich models. For the kinetic study, a solution of 500 mg L^?1 of DB1 was treated with each catalyst, visible light and H₂O₂. The dye concentration was measured by spectrophotometry at the wavelength of 565 nm, and the removal of the total organic content (TOC) was quantified. BET analysis yielded surface areas of 60.029, 20.116 and 70.662 m²g^?1 for CN, CN-Cu and CN-Fe, respectively. The kinetics of degradation were pseudo-first order, whose constants were 0.093, 0.039 and 0.110 min^?1 for CN, CN-Cu and CN-Fe, respectively. The total organic carbon (TOC) removal reached the highest value of 14.46% with CN-Fe.     

Ultra-dense planar metallic nanowire arrays with extremely large anisotropic optical and magnetic properties

A nanofabrication method for the production of ultra-dense planar metallic nanowire arrays scalable to wafer-size is presented. The method is based on an efficient template deposition process to grow diverse metallic nanowire arrays with extreme regularity in only two steps. First, III–V semiconductor substrates are irradiated by a low-energy ion beam at an elevated temperature, forming a highly ordered nanogroove pattern by a “reverse epitaxy” process due to self-assembly of surface vacancies. Second, diverse metallic nanowire arrays (Au, Fe, Ni, Co, FeAl alloy) are fabricated on these III–V templates by deposition at a glancing incidence angle. This method allows for the fabrication of metallic nanowire arrays with periodicities down to 45 nm scaled up to wafer-size fabrication. As typical noble and magnetic metals, the Au and Fe nanowire arrays produced here exhibited large anisotropic optical and magnetic properties, respectively. The excitation of localized surface plasmon resonances (LSPRs) of the Au nanowire arrays resulted in a high electric field enhancement, which was used to detect phthalocyanine (CoPc) in surface-enhanced Raman scattering (SERS). Furthermore, the Fe nanowire arrays showed a very high in-plane magnetic anisotropy of approximately 412 mT, which may be the largest in-plane magnetic anisotropy field yet reported that is solely induced via shape anisotropy within the plane of a thin film.

Open image in new window

     

Embossable grating couplers for planar waveguide optical sensors

Planar optical waveguides are an attractive tool for use in analytical chemistry and spectroscopy. Although similar to fiber optics, planar waveguides have been slow to be commercially accepted due to the difficulty of coupling light into the guide. Generally, prism coupling is the method of choice in the laboratory, as efficiencies approaching 80% can be reached. However, prisms are impractical for routine use for several reasons: expensive positioning equipment is required, coupled power is sensitive to environmental fluctuations, and prism coupling prohibits the fabrication of a truly planar device. The use of thin gratings on the surface of the waveguide allows for a two-dimensional structure to be maintained, while providing enough efficiency to be useful as a sensor. Our research efforts focus on developing a technique to make inexpensive, reproducible gratings that are easy to fabricate. By chemically modifying the surface of a commercial grating with a suitable release agent, it is possible to emboss replica gratings onto a variety of waveguide types. The fabrication of embossed gratings will be described, and their performance on glass, ion-diffused, polymer, and semiconductor waveguides will be presented.     

Imhotep: an approach to user and device conscious mobile applications

As the dependence on mobile devices increases, the need for supporting a wider range of users and devices becomes crucial. Elders and people with disabilities adopt new technologies reluctantly, a tendency caused by the lack of adaptation of these technologies to their needs. To address this challenge, this paper describes a framework, Imhotep, whose aim is to aid developers in the accessible application creation process, making the creation of user-centered applications easier and faster. Our framework allows to easily adapt the applications to the constraints imposed by the user capabilities (sensorial, cognitive, and physical capabilities) and device capabilities by providing a repository that will manage the compilation and deployment of applications that include a set of preprocessor directives in the source code. These directives are enhanced with concepts that are automatically adjusted to the current trends of mobile devices by using a Fuzzy Knowledge-Eliciting Reasoner. Our final goal is to increase the number of applications targeted to elders and people with disabilities providing tools that facilitate their development. The paper also describes the evaluation of both the accuracy of the fuzzy terms generated for mobile devices and the usability of the proposed platform.