Pilot Plant Study of Simultaneous Sewage Sludge Digestion and Metal Leaching

This research is related to a preindustrial pilot scale study of the performance of the simultaneous sewage sludge digestion and metal leaching (SSDML) process for decontamination and stabilization of sewage sludge. Ten batch tests were carried out in two 4?m3 bioreactors under various conditions of operation. Results indicated that the addition of 1.0 to 1.5?g?S0/L, which is the equivalent of approximately 30 to 50?kg?S0 per tons dry sludge, is sufficient to obtain conditions of acidity (pH<2.5) and oxido-reduction potential greater than 500 mV necessary for an effective solubilization of toxic metals. The final average of metal solubilization in the output sludge during the SSDML process varied in the following ranges: 25–78% Cd, 9–32% Cr, 48–100% Cu, 77–99% Mn, 15–53% Ni, 12–47% Pb, and 66–100% Zn. The N, P, and K contents were also preserved in the decontaminated sludge. Moreover, the use of low concentrations of elemental sulfur makes it possible to obtain decontaminated sludge with a low total sulfur content (1.4–1.5% S) compatible with agricultural use. The suspended solids removal calculated for the SSDML process was slightly lower, (2.5±0.4)% volatile suspended solids per day, than those reached using standard aerobic digestion. Finally, the SSDML process was found to be effective in removing bad odors and in the destruction (99–100%) of indicator bacteria.     

ENHANCING THE CREATIVITY OF REENGINEERING Techniques for Making IS More Creative

Industries in the US continue to lose ground in international competition. If IS is to help change that trend, it will have to become more creative. Creativity improvement programs are being introduced in other areas of the company— now is the time for IS organizations to follow suit.     

European diversity in science and technology

A clear understanding of the concept and consequences of diversity in science and technology is a key issue for Europe, when considering the current debate on cohesion Put forward within the Single European Act. According to Article 130B of the Single Act, all European policies, including technological policies must contribute to the achievement of a greater cohesion throughout the EC. The European market is generally presented as mainly a patchwork of national or even regional characteristics, with compartmentalized niches, and specific regulations. But does cohesion mean decreasing disparities between regions, which in such case signifies a passive policy of reallocation of resources within the EC, at the risk of generating uniformity? Or, does cohesion mean integration of all innovative and creative efforts, which implies a more complex policy of stimulation, under the condition to maintain a certain diversity? Must the governments systematically reduce diversity, or on the contrary must they enlarge diversity? How can they distinguish between negative and positive aspects of diversity? How do they operate a trade off between economies of scale and economies of diversity? To try to answer these political issues and to set up a coherent industrial policy at the EC level, a careful analysis of the sources of diversity, of the mechanisms that generate or reduce diversity, of the ways to valorize diversity are discussed in this paper     

Investigating the thermal-plasma processing of advanced materials

Due to several inherent advantages, plasma processing technology may become a very useful tool in the production of new materials. An increasing research effort based on experimental as well as theoretical investigations has been invested in this area for the synthesis of advanced materials. In describing the thermal-plasma processing technique, this article employs examples from research at the Plasma Processing Laboratory at the University of Idaho.     

Effect of humidity and temperature on the adhesive strength of pressure sensitive adhesives

This paper reports the effect of humidity and temperature on the adhesive strength of a pressure sensitive adhesive (Flexbond 150) used to bond Mylar films. It has been found that, ill general, the adhesive strength decreases significantly with an increase in temperature. The effect of humidity on the bonding strength, however, was found to be process dependent. The sample preparation conditions, e.g., press weight for the bonding and the press time, are important in determining the humidity effect. The water sorption isotherm A 24°C for the adhesive was also determined. The amount of water sorbed by the adhesive at 95 percent relative pressure was found to be less than one weight percent.     

Vom freiwilligen Seminar zur Q2-Pflichtveranstaltung

Definition of the problem: Ethical reasoning cannot be enforced. Voluntary understanding is a basic condition for the development of ethical competencies and attitudes. The aim of this survey was to investigate whether the presence of those students who attended our seminars compulsorily would have a negative effect upon the quality of the course. Methods and results: The participants of our small-group seminars in medical ethics were asked to complete a questionnaire on teaching aims, seminar atmosphere, moderation and importance of subjects. One hundred and ninety-two voluntary participants (2001/2) and 293 compulsory participants (2002/3) completed the questionnaire and were statistically compared. There was no significant difference between voluntary and compulsory participants in any of the important items. However, there were considerable differences in some items between male and female participants. Conclusion: We were surprised that there was no difference between the two groups. This leads us to hope that our concept of case-based small-group seminars will prove capable of realising our teaching aims for all students. The difference between male and female participants may have important didactic consequences and will be the subject of further studies.     

Resistance to Fracture of a Partially Stabilized Zirconia/β-Alumina Composite

Partially stabilized zirconia (PSZ) /β-alumina composites exhibit extensive non-elastic deformation during fracture. Repeated loading/stable fracture/unloading experiments were performed on chevron-notched four-point-bend specimens of the composite and pure PSZ. The energy consumption during the propagation of long cracks in the composite (∼500 J/m²) is 1 order of magnitude larger than for PSZ (∼50 J/m²). Breaking strengths of 127 MPa were obtained with a Weibull modulus of 43.     

A PROTOTYPE GRID FRAMEWORK FOR THE CHEMICAL PROCESS INDUSTRIES

This article presents a GRID framework for distributed computations in the chemical process industries. We advocate a generic agent-based GRID environment in which chemical processes can be represented, simulated, and optimized as a set of autonomous, collaborative software agents. The framework features numerous advantages in terms of scalability, software reuse, security, and distributed resource discovery and utilization. It is a novel example of how advanced distributed techniques and paradigms can be elegantly applied in the area of chemical engineering to support distributed computations and discovery functions in chemical process engineering. A prototype implementation of the proposed framework for chemical process design is presented to illustrate the concepts.