Compatibility Relations of A1203 in the System Zr02-Al203-Si02-CaO

Compatibility relations of Al₂0₃ in the quaternary system Zr02-Al₂0₃-Si0₂-CaO were studied by firing and quenching followed by microscopy and energy-dispersive X-ray examination. A projection of the boundary surface of the primary crystallization volume of Al₂0₃ was constructed in terms of the CaO, Si0₂, and Zr0₂ contents of the mixtures recalculated to 100 wt%. Two invariant points, where four solids coexist with a liquid phase, are defined, and the positions of the isotherms were established.     

CHARACTERIZATION OF EVA-BASED ADHESIVES CONTAINING DIFFERENT AMOUNTS OF ROSIN ESTER OR POLYTERPENE TACKIFIER

Different amounts (50-170 php--parts per hundred parts of EVA, 33-63 wt%) of two tackifiers (hydrogenated rosin ester, polyterpene resin) were added to an ethylene vinyl acetate (EVA) copolymer containing 28 wt% vinyl acetate. The EVA and the tackifier were characterized using infrared (IR) spectroscopy, DSC measurements, and stress-controlled plate-plate rheology. The properties and compatibility of the EVA-tackifier mixtures were studied using DSC, DMTA, and stress-controlled plate-plate rheology. Immediate adhesion was measured as a quantification of tack, and the T-peel strength of roughened styrene-butadiene rubber/EVA-tackifier adhesive joints was also obtained. The increase in the amount of tackifier noticeably changed the crystallinity of polyethylene blocks in the EVA, and the temperature at the cross-over between the curves of the storage and loss moduli as a function of the temperature was displaced to a lower value. Whereas the hydrogenated rosin ester was compatible with the amorphous ethylene vinyl acetate copolymer regions of the EVA (Tg value increased) reducing its crystallinity, the polyterpene resin was compatible with the polyethylene blocks of the EVA (T g value was not modified), increasing its crystallinity. Immediate adhesion of the EVA-tackifier mixtures was improved by adding both hydrogenated rosin ester and polyterpene tackifiers. On the other hand, there was an optimum tackifier content at which the maximum T-peel strength value was obtained.     

Agricultural use of three organic residues: effect on orange production and on properties of a soil of the ‘Comarca Costa de Huelva’ (SW Spain)

Disposal of urban, agricultural and industrial organic residues impliesan increasing problem because of all the economic and environmentalrepercussions involved. One of the most adequate ways of managing this problemis the agricultural use of these wastes as organic amendments. Three organicresidues (AC, olive mill waste water sludge compost; MWC, municipal solid wastecompost; and PS, paper mill sludge) were used in a 3-year field experimentinvolving orange production. The effect of their application on crop productionand on soil quality was investigated. Soil samples (0–20 cm depth)collected 11 months after the last soil amendment were analysed for: pH and EC,Kjeldahl-N, available-P, available-K, total organic carbon, humic substances,dehydrogenase, phosphatase, -glucosidase, urease andbenzoyl-argininamidehydrolysing protease (BAA-protease) activities. Generally, the application of the MWC and PSincreased orange yield when compared to control. Moreover, total organic carbonand humic substances significantly increased in soils treated with all theorganic amendments. Organic fertilisation increased the Kjeldahl-N andavailable-P contents of the soil. The application of the organic residues also causedsignificant increases in dehydrogenase, -glucosidase, urease andBAA-protease activities of the soil. Significant positive correlations (p <0.01) between these enzymatic activities and total organic carbon were foundforall treatments. Significant positive correlation between dehydrogenase, urease,-glucosidase, and BAA-protease and orange yield was also found. However,a clear inhibition of phosphatase activity was observed in soils treated withPS. The results indicate that the repeated application to the soil of moderateamounts of organic amendments has positive effects on the chemical andbiochemical properties of the soil, as well as on the orange yield.     

Calmodulin Supports TRPA1 Channel Association with Opioid Receptors and Glutamate NMDA Receptors in the Nervous Tissue

Transient receptor potential ankyrin member 1 (TRPA1) belongs to the family of thermo TRP cation channels that detect harmful temperatures, acids and numerous chemical pollutants. TRPA1 is expressed in nervous tissue, where it participates in the genesis of nociceptive signals in response to noxious stimuli and mediates mechanical hyperalgesia and allodynia associated with different neuropathies. The glutamate N-methyl-d-aspartate receptor (NMDAR), which plays a relevant role in allodynia to mechanical stimuli, is connected via histidine triad nucleotide-binding protein 1 (HINT1) and type 1 sigma receptor (σ1R) to mu-opioid receptors (MORs), which mediate the most potent pain relief. Notably, neuropathic pain causes a reduction in MOR antinociceptive efficacy, which can be reversed by blocking spinal NMDARs and TRPA1 channels. Thus, we studied whether TRPA1 channels form complexes with MORs and NMDARs that may be implicated in the aforementioned nociceptive signals. Our data suggest that TRPA1 channels functionally associate with MORs, delta opioid receptors and NMDARs in the dorsal root ganglia, the spinal cord and brain areas. These associations were altered in response to pharmacological interventions and the induction of inflammatory and also neuropathic pain. The MOR-TRPA1 and NMDAR-TRPA1 associations do not require HINT1 or σ1R but appear to be mediated by calcium-activated calmodulin. Thus, TRPA1 channels may associate with NMDARs to promote ascending acute and chronic pain signals and to control MOR antinociception.     

Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

Optimizing content placement in a peer-assisted VoD architecture

Recently, a new peer-assisted architecture to build content delivery systems has been presented. This architecture is based on the use of the storage capacity of end-users’ set-top boxes (STBs), connected in a peer-to-peer (P2P) manner in order to help the content servers in the delivery process. In these systems, the contents are usually split into a set of smaller pieces, called sub-streams, which are randomly injected at the STBs. The present paper is focused on Video on Demand (VoD) streaming and it is assumed that the STB-based content delivery system is deployed over the global Internet, where the clients are distributed over different ISP networks. In this scenario, three different strategies are studied for increasing the percentage of data uploaded by peers, in order to offload the content servers as much as possible. First of all, a new mechanism is presented which determines which sub-stream has to be placed at which STB by a Non-Linear Programming (NLP) formulation. A different strategy for reducing the content server load is to take advantage of the available bandwidth in the different ISP networks. In this sense, two new mechanisms for forwarding the VoD requests to different ISP networks are presented. Finally, the present paper also shows that in some situations the available uplink bandwidth is associated with STBs that do not have the required sub-streams. Regarding this concern, a new mechanism has been designed that dynamically re-allocates some streams, which are being transmitted from specific STBs, to different STBs, in order to find the necessary resources to start new streaming sessions.     

Boosting the confidence of new product development teams: The role of team boundary spanning,team size and functional diversity

In today's highly interconnected, uncertain and dynamic business environment, team boundary spanning has become an important determinant of the performance of new product development (NPD) projects. Despite the positive evidence supporting the use of boundary spanning activities by NPD teams, little is still known about how boundary spanning teams become high-performance teams. The current study advances research on this subject by examining the mediating effect of team potency on the relationship between team boundary spanning and new product performance, as well as the moderating effects of team size and functional diversity on the relationship between team boundary spanning and team potency. Data from a time-lagged survey study of 140 NPD projects found that team boundary spanning can promote team potency that, in turn, results in greater new product quality and new product creativity. The positive effect of team boundary spanning on team potency was found to be more pronounced for NPD teams of medium size and high levels of functional diversity.     

Plasmon resonant amplification of a hot electron-driven photodiode

Nano Research - We report plasmon resonant excitation of hot electrons in a photodetector based on a metal/oxide/metal (Au/Al2O3/graphene) heterostructure. In this device, hot electrons, excited...     

ARPO-2: An expert system for legal advice on the breach of building contracts

Although Berman and Hafner [Berman 1989, pp. 928–938] presented the possibility to adapt the model of reasoning of development of an expert system for medical diagnosis to the reasoning of a judge when he/she sentences criminals does not resemble the reasoning found in the decisions of physicians, mathematicians or statisticians.When a lawyer reasons, he/she not only looks for the solution of a case; he/she simultaneously looks for the bases on which his/her reasoning can rest [Galindo 1992, pp. 363–367]. That is to say, he/she not only needs to find the solution but moreover he/she has to find the references (laws, jurisprudence and bibliography) that allow him/her to argue the solution.In many cases, computer solutions to these reasoning processes have been made in a separated way: the solution to the cases using expert systems, and the search of documentation using information retrieval systems.This paper presents the ARPO-2 prototype, a solution integrating the two aspects of legal reasoning: an expert system which is able to simultaneously find the solution to a problem and to give the necessary references so that the lawyer argues the solution. The subject on which the prototype solves problems is the breach of building contracts.In this paper, we describe the process of development of an expert system for solving, justification and documentation of breach of contracts, giving details on the way how the objects that intervene in the case were defined as well as on the reasoning followed.This paper was funded in part by DGICYT, Spanish Civil Law Computerization Project: PB870-632.     

Performance of Scheduling Policies in Adversarial Networks with Non-synchronized Clocks

In this paper we generalize the Continuous Adversarial Queuing Theory (CAQT) model (Blesa et al. in MFCS, Lecture Notes in Computer Science, vol. 3618, pp. 144–155, 2005) by considering the possibility that the router clocks in the network are not synchronized. We name the new model Non Synchronized CAQT (NSCAQT). Clearly, this new extension to the model only affects those scheduling policies that use some form of timing. In a first approach we consider the case in which although not synchronized, all clocks run at the same speed, maintaining constant differences. In this case we show that all universally stable policies in CAQT that use the injection time and the remaining path to schedule packets remain universally stable. These policies include, for instance, Shortest in System (SIS) and Longest in System (LIS). Then, we study the case in which clock differences can vary over time, but the maximum difference is bounded. In this model we show the universal stability of two families of policies related to SIS and LIS respectively (the priority of a packet in these policies depends on the arrival time and a function of the path traversed). The bounds we obtain in this case depend on the maximum difference between clocks. This is a necessary requirement, since we also show that LIS is not universally stable in systems without bounded clock difference. We then present a new policy that we call Longest in Queues (LIQ), which gives priority to the packet that has been waiting the longest in edge queues. This policy is universally stable and, if clocks maintain constant differences, the bounds we prove do not depend on them. To finish, we provide with simulation results that compare the behavior of some of these policies in a network with stochastic injection of packets.