Magnetic resonance image denoising using nonlocal maximum likelihood paradigm in DCT‐framework

The data acquired by magnetic resonance (MR) imaging system are inherently degraded by noise that has its origin in the thermal Brownian motion of electrons. Denoising can enhance the quality (by improving the SNR) of the acquired MR image, which is important for both visual analysis and other post processing operations. Recent works on maximum likelihood (ML) based denoising shows that ML methods are very effective in denoising MR images and has an edge over the other state‐of‐the‐art methods for MRI denoising. Among the ML based approaches, the Nonlocal maximum likelihood (NLML) method is commonly used. In the conventional NLML method, the samples for the ML estimation of the unknown true pixel are chosen in a nonlocal fashion based on the intensity similarity of the pixel neighborhoods. Euclidean distance is generally used to measure this similarity. It has been recently shown that computing similarity measure is more robust in discrete cosine transform (DCT) subspace, compared with Euclidean image subspace. Motivated by this observation, we integrated DCT into NLML to produce an improved MRI filtration process. Other than improving the SNR, the time complexity of the conventional NLML can also be significantly reduced through the proposed approach. On synthetic MR brain image, an average improvement of 5% in PSNR and 86%reduction in execution time is achieved with a search window size of 91 × 91 after incorporating the improvements in the existing NLML method. On an experimental kiwi fruit image an improvement of 10% in PSNR is achieved. We did experiments on both simulated and real data sets to validate and to demonstrate the effectiveness of the proposed method. © 2015 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 25, 256–264, 2015     

Structure–property relationships in ternary polymer blends with core–shell inclusions: revisiting the critical role of the viscosity ratio

Structure–property relationship in typical polypropylene/polycarbonate/poly[styrene-b-(ethylene-co-butylene)-b-styrene] (PP/PC/SEBS) ternary blends containing maleated SEBS (SEBS-g-MAH) was investigated. Three grades of PC with different melt viscosities were used, and changes in blend morphology from PC/SEBS core–shell particles partially surrounded by SEBS-g-MAH to inverse SEBS/PC core–shell particles in PP matrix were observed upon varying the viscosity ratio of PC to SEBS. It was found that the viscosity ratio completely controls the size of the core–shell droplets and governs the type, population, and shape of the dispersed domains, as evidenced by rheological, mechanical, and thermomechanical behavioral assessments. Dynamic mechanical analysis of samples with common (PC–SEBS) and inverse (SEBS–PC) core–shell particles revealed that they show completely different behaviors: blends containing PC–SEBS presented a higher storage and loss modulus, while blends containing SEBS–PC exhibited a lower β-transition temperature. Moreover, ternary blends with PC cores showed the highest Young’s modulus values and the lowest impact strength, due to the different fracture modes of the blends containing PC–SEBS and SEPS–PC core–shell droplets, which present debonding and shell-fracture mechanisms, respectively. Morphological observations of blends with high-molecular-weight PC demonstrated the presence of detached droplets and rods of PC in the PP matrix, along with composite core–shell and rod-like particles. Micrographs of the fracture surfaces confirmed the proposed mechanisms, given the presence of stretched (debonded) PC (SEBS) cores encapsulated by SEBS (PC), which require more (less) energy to achieve fracture. The correlation between the mechanical and morphological properties proves that decreasing core diameter and shell thickness has positive effects on the impact strength but decreases the Young’s modulus.     

An improved strategy for skin lesion detection and classification using uniform segmentation and feature selection based approach

Melanoma is the deadliest type of skin cancer with highest mortality rate. However, the annihilation in early stage implies a high survival rate therefore, it demands early diagnosis. The accustomed diagnosis methods are costly and cumbersome due to the involvement of experienced experts as well as the requirements for highly equipped environment. The recent advancements in computerized solutions for these diagnoses are highly promising with improved accuracy and efficiency. In this article, we proposed a method for the classification of melanoma and benign skin lesions. Our approach integrates preprocessing, lesion segmentation, features extraction, features selection, and classification. Preprocessing is executed in the context of hair removal by DullRazor, whereas lesion texture and color information are utilized to enhance the lesion contrast. In lesion segmentation, a hybrid technique has been implemented and results are fused using additive law of probability. Serial based method is applied subsequently that extracts and fuses the traits such as color, texture, and HOG (shape). The fused features are selected afterwards by implementing a novel Boltzman Entropy method. Finally, the selected features are classified by Support Vector Machine. The proposed method is evaluated on publically available data set PH2. Our approach has provided promising results of sensitivity 97.7%, specificity 96.7%, accuracy 97.5%, and F‐score 97.5%, which are significantly better than the results of existing methods available on the same data set. The proposed method detects and classifies melanoma significantly good as compared to existing methods.     

Production of aromatics by catalytic fast pyrolysis of cellulose in a bubbling fluidized bed reactor

Catalytic fast pyrolysis of cellulose was studied at 500°C using a ZSM‐5 catalyst in a bubbling fluidized bed reactor constructed from a 4.92‐cm ID pipe. Inert gas was fed from below through the distributor plate and from above through a vertical feed tube along with cellulose. Flowing 34% of the total fluidization gas through the feed tube led to the optimal mixing of the pyrolysis vapors into the catalyst bed, which experimentally corresponded to 29.5% carbon aromatic yield. Aromatic yield reached a maximum of 31.6% carbon with increasing gas residence time by changing the catalyst bed height. Increasing the hole‐spacing in the distributor plate was shown to have negligible effect on average bubble diameter and hence did not change the product distribution. Aromatic yields of up to 39.5% carbon were obtained when all studied parameters were optimized. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1320–1335, 2014     

Investigation of Tokamak Plasma MHD Activity Using FFT Analysis of Mirnov Coils Oscillations

A tokamak plasma mode was analyzed using the Fast Fourier Transform (FFT). Fourier analysis is reliable technique for mode detection in tokamaks. For this purpose, we used a poloidal array of Mirnov coils. After Fourier analysis on Mirnov coils data, Power Spectral Density (PSD) diagram was plotted. PSD describes how the power of a signal is distributed with frequency. In this contribution we also determined edge safety factor and safety factor from Fourier based derived mode numbers q = m/n. We obtained the maximum MHD activity using power spectrum in the frequency of 33 kHz. Also the edge safety factor determined small than 3, and the values of obtained safety factor from the mode numbers are between 2 ≤ q ≤ 5.     

Effect of Cu2+ Ions and Buffering Capacity on Smectite Microstructure and Performance

Smectite is usually used as buffer clay for contaminant of high level nuclear waste canisters. Corrosion of the canisters will expose the buffer clay to Cu2+ ions as one of the corrosion products. This study investigates the effect of Cu2+ cations in a smectite, with and without addition of sodium carbonate in the clay, on its consolidation behavior and transmission characteristics. Characterization experiments conducted in the study included determination of changes in the buffering capacity and permeability properties of the clay in relation to the presence of varying concentrations of Cu2+, and consolidation experiments. Double-layer swelling forces and buffering capacity are seen to be dominant factors in the performance of the clays—apparently through their influence on formation and restructuring of microstructures in the overall smectite clay mixtures.     

Atmospheric pressure photoionization mass spectrometry

Atmospheric pressure photoionization (APPI) is the last arrival in the family of atmospheric pressure ionization (API) methods to couple mass spectrometry (MS) to liquid-phase separation techniques. The basic idea was to further extend the fields of application of liquid chromatography (LC)-MS to those molecules that are not, or are poorly amenable, to electrospray (ESI) or APCI. The present review explores the literature. After a short introduction with an historical background and the premises for its development, we describe the technique, its physical principles, and the factors that affect its efficiency. The review also presents a survey of applications in different fields.     

Five-Phase Interior Permanent-Magnet Motors With Low Torque Pulsation

High torque pulsation is a major disadvantage of most interior permanent-magnet (IPM) motor configurations. Choosing the proper number of stator slots and winding distribution as well as increasing number of phases are among the possible solutions for reducing torque pulsation. In this paper, five-phase IPM motor with fractional-slot stator is studied. It is shown that despite other IPM motors, the new five-phase IPM motor with fractional slot has a very low torque pulsation. For comparison purposes, a five-phase IPM motor with common configuration is also considered. It is shown that the torque pulsation of the proposed fractional-slot five-phase IPM motor is much lower than the conventional five-phase IPM motor. Nonlinear finite-element method is used to analyze different machine configurations. A prototype four-pole five-phase IPM motor with 15 stator slots has been built and is used for experimental verification     

Note: Zr(IV)-Immobilized Resin Prepared by Surface Template Polymerization for Fluoride Ion Removal

Abstract

A novel adsorbent Zr(IV)-immobilized resin was prepared to remove fluoride ions from tap water and industrial wastewater. In order to enhance both the kinetics and efficiency, large pathways were formed in the resin for fluoride ion adsorption and the Zr(IV)-phosphate complexes were immobilized on the polymer surface by surface-template polymerization. The Zr(IV)-immobilized resin had a fluoride adsorption capacity of 0.30 mmol/g. The morphology of the Zr(IV)-immobilized resin was evaluated by measuring the specific surface area, pore volume, and pore size distribution. The resin possessed large amounts of large macropores with diameters around 300 nm. The molecular structure at the fluoride adsorption sites was investigated by measuring the amounts of phosphorus, zirconium, and fluoride ion in the resin, and developing a model complex using computational chemistry. On the polymer surface, a fluoride ion/Zr(IV)/dioleyl phosphoric acid complex with an ideal F:Zr:P mole ratio of 3:1:3 could be formed.     

Microwave-assisted urea-modified sorghum biomass for Cr (III) elimination from aqueous solutions

The present study concentrated on the use of an agro-waste biodegradable sorghum biomass in its simple and modified forms for the binding of Cr (III) ions. A relatively new method of modification was adopted using urea under microwave irradiation. FTIR analysis showed the presence of oxygen and nitrogen bearing functional groups in unmodified (UMS) and modified (MS) sorghum biomass. The appearance of new bands and shifts in the peaks confirmed the modification. The influence of different process parameters such as the adsorbent dose, solution pH, contact time, agitation speed and initial metal ion concentration was studied thoroughly to evaluate optimum conditions for adsorption. Maximum adsorption for Cr (III) ions occurred at pH 5.0–6.0 using UMS and MS. Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherm models in a non-linear fashion were used to explain the phenomenon. Maximum adsorption capacity was 7.03 and 16.36 mg of Cr (III) per gram of UMS and MS, respectively. Adsorption mechanism was explored by pseudo-first- and pseudo-second-order kinetic models, and it was found that the process followed pseudo-second-order kinetics. Thermodynamic study indicated the process favorability. The study concluded that urea modification under microwave irradiation produces a non-toxic and more effective adsorbent for Cr (III) remediation by inducing new nitrogen bearing functional groups to sorghum biomass.