50 years of the IEEE Microwave Theory and Techniques Society

The early history of the IEEE Microwave Theory and Techniques Society (IEEE MTT-S) is summarized since its founding in 1952, and all administrative committee members and presidents are listed. Some of the more recent changes resulting from growth and multinational participation are described. Publications are discussed with editors listed for this Transactions, the IEEE Microwave and Wireless Components Letters, the IEEE Microwave Newsletter, and IEEE Microwave Magazine. The chronological evolution of the IEEE MTT-S's awards is presented, including a listing of all award winners. Distinguished lecturers and microwave symposia sites and chairpersons are also discussed. Early technology trends are described     

Mechanical behavior of 30–50 nm thick aluminum films under uniaxial tension

We present uniaxial tensile test results for 30–50 nm thick freestanding aluminum films. Young’s modulus and ductility were found to decrease monotonically with grain size. Reverse Hall–Petch behavior was observed with no appreciable room temperature creep. Non-linear elasticity with small irreversible deformation was observed for 50 nm thick specimens.     

Technology transfer projects in developing countries—furthering the Project Management perspectives

This paper attempts to broaden the analysis of the technology transfer phenomenon by refocusing research attention on the level of performance assessment of technology transfer projects. An holistic evaluation framework based on the considerations of an extended Project Life Cycle model is proposed to overcome some of the shortcomings of conventional approaches to project evaluation. This also reinforces the need for open systems thinking in assessing and managing risk of technology transfer projects. The discussion is based on two case studies which articulate the experiences with two integrated mechanisms of technology transfer used in Algeria from 1965 to 1990: turnkey and “product-in-hand”. The aim is to gain a better understanding of the processes of technology transfer and to contribute to the improvement of associated managerial practices in developing economies.     

Frequency dependence of the complex dielectric constant of sodium carboxymethyl cellulose

The dielectric constant, ε′, and dielectric loss, ε″, were determined for three solid carboxymethyl cellulose samples having different levels of substitution and different degrees of polymerization over a frequency range of 0.1 – 10 000 kHz at temperatures from 10–60°C. In contrast to the two relaxation processes, γ and β, previously observed in native cotton cellulose, only one relaxation process within a frequency range of 0.1 – 1 kHz was identified. It was found that the dielectric properties do not only depend on the degree of substitution, but also on the weight-average degree of polymerization and uniformity of distribution.     

Copolymerization of bromophenylmaleimide with ethyl or butyl methacrylate

N‐p‐Bromophenylmaleimide (BrPMI) does not polymerize in solution by conventional free radical mechanism. However, it readily polymerized in bulk when mixed with a free radical initiator and heated in a microwave oven for 7–8 min. Copolymerization of ethyl methacrylate or butyl methacrylate with BrPMI was conducted in dioxane. The copolymers were characterized by IR and ¹H NMR spectroscopy and gel permeation chromatography. The monomer reactivity ratios were calculated by a non‐linear least‐square analysis. Thermal analysis indicated a great improvement in thermal stability of the copolymers compared with the methacrylate homopolymers. BrPMI was also polymerized in bulk in the DSC pan, which allowed the calculation of the activation energy of its polymerization. Copyright © 2003 Society of Chemical Industry     

Experimental and mathematical studies of natural convection for solid-salt dissolution in water

The phenomena of natural convection caused by a concentration gradient usually creates currents as a result of buoyancy forces. These forces are formed from the combined effect of a fluid density gradient and the body force (gravitational force). The above phenomenon was studied experimentally in a circular glass column of 0.08 m diameter and 1 m length. This column was erected vertically and filled with distilled water with a salt bag placed on top of it and partially immersed in water. The dissolution mechanism was then modelled and a finite difference method was used to solve the formulated equations by using the implicit scheme of MacCormack (Anderson et al., 1984). The experimental results and the numerical predictions are represented graphically and give compatible agreement.     

Enteric viral infections of calves and passive immunity

At least eight viruses have been identified, four within the last 5 yr, that produce diarrhea and pathological intestinal lesions in experimentally inoculated calves. Coronavirus and rotavirus frequently are associated with the neonatal calf diarrhea syndrome, but the etiologic role of the newly identified viruses is undefined. All diarrheal viruses replicate within small intestinal epithelial cells, resulting in variable degrees of villous atrophy. Immunity against these viral infections, therefore, must be directed toward protection of the susceptible intestinal epithelial cells. Because most of these viral infections occur in calves less than 3 wk of age, passive lactogenic immunity within the gut lumen plays an important role in protection. This report reviews methods of boosting rotavirus antibody responses in bovine mammary secretions and analyses of passive and active immunity in calves supplemented with colostrum and challenged by rotavirus. Results indicate rotavirus immunoglobulin G1 antibodies in colostrum and milk were elevated after intramuscular and intramammary vaccination of pregnant cows with an Ohio Agricultural Research and Development Center rotavirus vaccine but not after intramuscular immunization with a commercial rota-coronavirus vaccine. Feeding colostrum from intramuscular plus intramammary immunized cows to newborn calves challenged by rotavirus prevented diarrhea and shedding of rotavirus.     

Rheology of concentrated solutions of hyperbranched polyesters

The solution rheology of different generations of hyperbranched polyesters in N‐methyl‐2‐pyrrolidinone (NMP) solvent was examined in this study. The solutions exhibited Newtonian behavior over a wide range of polyester concentrations. Also, the relative viscosities of poly(amidoamine) (PAMAM) dendrimers in ethylenediamine were compared with those of the hyperbranched polyesters in NMP. Both types of dendritic polymers have relative viscosities that are exponential functions of their molar fraction in solution. The slopes of these relative viscosity curves show a linear relationship with respect to the generation number. PAMAM dendrimers have the greater slopes for each generation, reflecting their relatively larger intrinsic viscosity values.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Transducin-alpha C-terminal peptide binding site consists of C-D and E-F loops of rhodopsin

The binding of heterotrimeric GTP-binding proteins (G-proteins) to serpentine receptors involves several independent contacts. We have deduced the points of interaction between mutant bovine rhodopsins and alphat-(340-350), a peptide corresponding to the C terminus of the alpha subunit (alphat) of bovine retinal G-protein, transducin. Direct binding of alphat-(340-350) to rhodopsin stabilizes the activated metarhodopsin II state (M II), consequently uncoupling the rhodopsin-transducin interaction. This peptide action requires two segments on the cytoplasmic domain of rhodopsin: the Tyr136-Val137-Val138-Val139 sequence on the C-D loop and the Glu247-Lys248-Glu249-Val250-Thr251 sequence on the E-F loop. We propose that a tertiary interaction of these two loop regions forms a pocket for binding the alphat C terminus of the transducin during light transduction in vivo. In most G-proteins, the C termini of alpha subunits are important for interaction with receptors, and, in several serpentine receptors, regions similar to those in rhodopsin are essential for G-protein activation, indicating that the interaction described here may be a generally applicable mode of G-protein binding in signal transduction.