Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

Preceramic organoboron–silicon polymers

Several boron-containing organosilicon polymers were synthesized from a sodium-coupling reaction of silicon and boron halides with and without alkyl halide in hydrocarbon solvents. The B–Si preceramic polymers were characterized using techniques such as IR, UV, and NMR spectrometry, gel permeation chromatography, elemental analysis, molecular weight measurement, and thermal analyses (TGA, DSC, DTA, and TMA). The chemical structures of the preceramic polymers were postulated based on the analytical results. Black ceramic materials were obtained from the precursor polymers upon thermal degradation at temperatures above 1000°C in an inert atmosphere. The precursor polymers had a ceramic yield of up to 70%. Thermogravimetric analysis of the ceramic material in air at a flow rate of 100 mL/min showed it was stable up to 1000°C with little weight gain or loss. Several methods were used to characterize the ceramic materials: XRD, solid NMR, high-temperature DTA, elemental analysis, and acid digestion. The analyses indicated that the ceramic materials comprised a mixture of silicon carbide (SiC), silicon borides (SiB₄, SiB₆), and amorphous Si–B–C ceramics, with small amounts of silica and free silicon.     

Growth dynamics in cystic fibrosis

The growth profiles of 28 cystic fibrosis patients, followed for at least three years, were analysed in order to study the dynamics of growth and to verify if any correlation with clinical events exists. Heights and weights were recorded at three-month intervals, and the patterns did not appear stable or linear, although a graphical smoothing might depict a linear pattern. Height and weight velocity profiles were plotted and all cases showed regular pulsatile patterns of height and weight velocity. By taking measurements at three-month intervals, the pulsatile rhythm was found to be associated with a circannual rhythm. When the appearance of clinical events was related to growth velocity profiles for each individual, the majority (71-82%) occurred during the descending phase of the growth velocity. An understanding of the individual pulsatile pattern of growth may actually increase the sensitivity of surveillance, and checks might be programmed according to the individual pattern, since the risk of developing an adverse clinical event is significantly greater during the slowing phase of the growth velocity.     

Limnological features of Funil Reservoir (R.J., Brazil) and indicator properties of rotifers and cladocerans of the zooplankton community

Funil Reservoir receives inflow from a highly industrialized region and acts as a natural sink to pollutants. Among the consequences of the uncontrolled nutrient loading is the constant presence and periodic heavy blooms of Microcystis aeruginosa . This study verified limnological features and zooplankton assemblage of the Funil Reservoir focusing on the environmental-indicator properties of rotifers and cladocerans. The summer bloom of M. aeruginosa caused reductions in water transparency, nitrate and orthophosphate concentrations and raises in chlorophyll a , pH, dissolved oxygen and chemical oxygen demand values. All zooplankton species presented spatial and temporal variations with the exception of the copepods, which were present in all samples. According to canonical correspondence analysis, ammonium was the variable most related to zooplankton variability and different Rotifera and Cladocera assemblages indicated distinct environment conditions. Rotifer taxa associated with increases of water temperature and chlorophyll a concentration were found with high densities during M. aeruginosa blooms. Species of rotifer and cladocerans are suggested as indicators that can be used to identify different physical and chemical gradients or eutrophic increases in Funil Reservoir.     

High-Performance Multilayer Capacitor Dielectrics from Chemically Prepared Powders

Advantages of chemically prepared powders for electronic ceramics have been demonstrated for a number of multilayer capacitor (MLC) dielectrics. A cost-efficient precipitation process was developed to produce undoped or doped crystalline barium titanate powder with a narrow particle size distribution close to 0.5 μm. More complex compositions, e.g., barium-neodymium titanate, were amorphous as precipitated but could be crystallized by calcination below 1000°C. Additional compositional modifications, to adjust electrical properties or to lower sintering temperature, were accomplished by doping the surface of the powder particles using a solution coating process. Exceptional fired densities and electrical performance were obtained.     

Temperature dependence of resistivity for thermally diffused V3Si multilayer films

Results concerning V₃Si films produced by a simple annealed multilayer technique are reported together with X-ray diffraction patterns, Auger spectroscopy, and Rutherford backscattering analysis. Low-temperature electrical resistivity measurements are discussed. It is found that the V₃Si films exhibit aT ² dependence in the temperature rangeT _c T23 K and aT ^2.6 dependence in the rangeT _c T40 K. The normal-state resistivity in the whole temperature range (T _c T600 K) is analyzed in the framework of Cote-Meisel theory. Consistent values of the saturation resistivity _m and of the Debye temperature are obtained by fitting the experimental data with the Cote-Meisel expression for (T).     

Modeling guided wave propagation with application to the long-range defect detection in railroad tracks

The aim of this work is to demonstrate the use of a commercial finite element package, ABAQUS EXPLICIT, to model ultrasonic guided waves in structural components. The particular application of interest is modeling the interaction of a broadband vertical bending mode with transverse-type defects in railroad tracks. This topic is part of a broader project on high-speed defect detection in rails by long-range ultrasonic inspections. Reflection coefficient spectra in the 20–45 kHz range are obtained for four different sizes and three different orientations of transverse head flaws. A preliminary study of Lamb waves in a free plate helps drawing modeling guidelines for the rail.     

Pharmacological Evidence on Augmented Antiallodynia Following Systemic Co-Treatment with GlyT-1 and GlyT-2 Inhibitors in Rat Neuropathic Pain Model

The limited effect of current medications on neuropathic pain (NP) has initiated large efforts to develop effective treatments. Animal studies showed that glycine transporter (GlyT) inhibitors are promising analgesics in NP, though concerns regarding adverse effects were raised. We aimed to study NFPS and Org-25543, GlyT-1 and GlyT-2 inhibitors, respectively and their combination in rat mononeuropathic pain evoked by partial sciatic nerve ligation. Cerebrospinal fluid (CSF) glycine content was also determined by capillary electrophoresis. Subcutaneous (s.c.) 4 mg/kg NFPS or Org-25543 showed analgesia following acute administration (30–60 min). Small doses of each compound failed to produce antiallodynia up to 180 min after the acute administration. However, NFPS (1 mg/kg) produced antiallodynia after four days of treatment. Co-treatment with subanalgesic doses of NFPS (1 mg/kg) and Org-25543 (2 mg/kg) produced analgesia at 60 min and thereafter meanwhile increased significantly the CSF glycine content. This combination alleviated NP without affecting motor function. Test compounds failed to activate G-proteins in spinal cord. To the best of our knowledge for the first time we demonstrated augmented analgesia by combining GlyT-1 and 2 inhibitors. Increased CSF glycine content supports involvement of glycinergic system. Combining selective GlyT inhibitors or developing non-selective GlyT inhibitors might have therapeutic value in NP.     

Cushing’s Syndrome Effects on the Thyroid

The most known effects of endogenous Cushing’s syndrome are the phenotypic changes and metabolic consequences. However, hypercortisolism can exert important effects on other endocrine axes. The hypothalamus–pituitary–thyroid axis activity can be impaired by the inappropriate cortisol secretion, which determinates the clinical and biochemical features of the “central hypothyroidism”. These findings have been confirmed by several clinical studies, which also showed that the cure of hypercortisolism can determine the recovery of normal hypothalamus–pituitary–thyroid axis activity. During active Cushing’s syndrome, the “immunological tolerance” guaranteed by the hypercortisolism can mask, in predisposed patients, the development of autoimmune thyroid diseases, which increases in prevalence after the resolution of hypercortisolism. However, the immunological mechanism is not the only factor that contributes to this phenomenon, which probably includes also deiodinase-impaired activity. Cushing’s syndrome can also have an indirect impact on thyroid function, considering that some drugs used for the medical control of hypercortisolism are associated with alterations in the thyroid function test. These considerations suggest the utility to check the thyroid function in Cushing’s syndrome patients, both during the active disease and after its remission.