Numerical analysis of friction stir welding process

Friction stir welding (FSW), which has several advantages over the conventional welding processes, is a solid-state welding process where no gross melting of the material being welded takes place. Despite significant advances over the last decade, the fundamental knowledge of thermomechanical processes during FSW is still not completely understood. To gain physical insight into the FSW process and the evaluation of the critical parameters, the development of models and simulation techniques is a necessity. In this article, the available literature on modeling of FSW has been reviewed followed by details of an attempt to understand the interaction between process parameters from a simulation study, performed using commercially available nonlinear finite element (FE) code DEFORM. The distributions of temperature, residual stress, strain, and strain rates were analyzed across various regions of the weld apart from material flow as a means of evaluating process efficiency and the quality of the weld. The distribution of process parameters is of importance in the prediction of the occurrence of welding defects, and to locate areas of concern for the metallurgist. The suitability of this modeling tool to simulate the FSW process has been discussed. The lack of the detailed material constitutive information and other thermal and physical properties at conditions such as very high strain rates and elevated temperatures seems to be the limiting factor while modeling the FSW process.     

Memory leak detection in Plumbr

Platforms with automatic memory management, such as the JVM, are usually considered free of memory leaks. However, memory leaks can happen in such environments, as the garbage collector cannot free objects, which are not used by the application anymore, but are still referenced. Such unused objects can eventually fill up the heap and crash the application. Although this problem has been studied extensively, nevertheless, there are still many rooms for improvement in this area. This paper describes the statistical approach for memory leak detection, as an alternative, along with a commercial tool, Plumbr, which is based on the method. The tool is later analyzed with three case studies of real applications and in the process also analyzes strengths and weaknesses of the statistical approach for memory leak detection. Copyright © 2014 John Wiley & Sons, Ltd.     

Video Data Delivery using Slotted Patching

In the request-based scheme, a patching channel is initiated on arrival of a request in an interarrival time of two adjacent multicast channels. If two requests are received in a short duration in an interarrival time, two patching channels are needed to service them. Both these channels deliver almost the same data, thus, wasting the bandwidth. This problem may be addressed in two ways: using higher level patching technique, or forcing the first request to wait for the second one. Using higher level patching technique makes the system more complex and thus usually not preferred. In the second case, the bandwidth usage certainly reduces, but the length of the waiting time by the first request for the second request is the main issue. In this paper, this issue is addressed by dividing the video duration into uniform time slots such that there is at least one request in a time slot for initiating the patching channel. The proposed scheme is named as Video Data Delivery using Slotted Patching. In this scheme, the patching channels download much less video data than the request-based scheme and thus require less bandwidth. This scheme may not provide immediate services to all users unlike the request-based scheme, but the user's waiting can be made arbitrarily small without using much resources unlike the request-based scheme.     

Light Controlled Biohybrid Microbots

Biohybrid microbots integrate biological actuators and sensors into synthetic chassis with the aim of providing the building blocks of next-generation micro-robotics. One of the main challenges is the development of self-assembled systems with consistent behavior and such that they can be controlled independently to perform complex tasks. Herein, it is shown that, using light-driven bacteria as propellers, 3D printed microbots can be steered by unbalancing light intensity over different microbot parts. An optimal feedback loop is designed in which a central computer projects onto each microbot a tailor-made light pattern, calculated from its position and orientation. In this way, multiple microbots can be independently guided through a series of spatially distributed checkpoints. By exploiting a natural light-driven proton pump, these bio-hybrid microbots are able to extract mechanical energy from light with such high efficiency that, in principle, hundreds of these systems can be controlled simultaneously with a total optical power of just a few milliwatts.     

Energy optimization for CAN bus and media controls in electric vehicles using deep learning algorithms

The Journal of Supercomputing - This study offers a neural network-based deep learning method for energy optimization modeling in electric vehicles (EV). The pre-processed driving cycle is...     

Cryorolling and warm forming of AA6061 aluminum alloy sheets

Cryorolling is a severe plastic deformation (SPD) process used to obtain ultrafine-grained aluminum alloy sheets along with higher strength and hardness than in conventional cold rolling, but it results in poor formability. An alternative method to improve both strength and formability of cryorolled sheets by warm forming after cryorolling without any post-heat treatment is proposed in this work. The formability of cryorolled AA6061 Al alloy sheets in the warm working temperature range is characterized in terms of forming limit diagrams (FLDs) and limiting dome height (LDH). Strain distributions and thinning in biaxially stretched samples are studied. Hardness of the formed samples is correlated with ultimate tensile strength to estimate post-forming mechanical properties. The limit strains and LDH have been found to be higher than in the case of the conventional processing route (cold rolled, annealed and formed at room temperature), making this hybrid route capable of producing sheet metal parts of aluminum alloys with high strength and formability. In order to combine the advantages of enhanced formability and better post-forming strength than the conventional cold rolled and annealed sheets, warm forming at 250°C has been found to be suitable for this alloy in the temperature range that has been studied.     

Development and gamma-scintigraphy study of Hibiscus rosasinensis polysaccharide-based microspheres for nasal drug delivery

Objective: This work describes the application of natural plant polysaccharide as pharmaceutical mucoadhesive excipients in delivery systems to reduce the clearance rate through nasal cavity.

Methods: Novel natural polysaccharide (Hibiscus rosasinensis)-based mucoadhesive microspheres were prepared by using emulsion crosslinking method for the delivery of rizatriptan benzoate (RB) through nasal route. Mucoadhesive microspheres were characterized for different parameters and nasal clearance of technetium-99m (^99mTc)-radiolabeled microspheres was determined by using gamma-scintigraphy.

Results: Their Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) studies showed that the drug was stable during preparation of microspheres. Aerodynamic diameter of microspheres was in the range 13.23?±?1.83–33.57?±?3.69?µm. Change in drug and polysaccharide ratio influenced the mucoadhesion, encapsulation efficiency and in-vitro release property. Scintigraphs taken at regular interval indicate that control solution was cleared rapidly from nasal cavity, whereas microspheres showed slower clearance (p?Conclusion: Natural polysaccharide-based microspheres achieved extended residence by minimizing effect of mucociliary clearance with opportunity of sustained delivery for longer duration.     

Evaluation of potential anti‐cancer activity of cationic liposomal nanoformulated Lycopodium clavatum in colon cancer cells

Research dealing with early diagnosis and efficient treatment in colon cancer to improve patient''s survival is still under investigation. Chemotherapeutic agent result in high systemic toxicity due to their non‐specific actions on DNA repair and/or cell replication. Traditional medicine such as Lycopodium clavatum (LC) has been claimed to have therapeutic potentials against cancer. The present study focuses on targeted drug delivery of cationic liposomal nanoformulated LC (CL‐LC) in colon cancer cells (HCT15) and comparing the efficacy with an anti‐colon cancer drug, 7‐ethyl‐10‐hydroxy‐camptothecin (SN38) along with its nanoformulated form (CL‐SN38). The colloidal suspension of LC was made using thin film hydration method. The drugs were characterised using ultraviolet, dynamic light scattering, scanning electron microscopy, energy, dispersive X‐ray spectroscopy. In vitro drug release showed kinetics of 49 and 89% of SN38 and LC, whereas CL‐SN38 and CL‐LC showed 73 and 74% of sustained drug release, respectively. Studies on morphological changes, cell viability, cytotoxicity, apoptosis, cancer‐associated gene expression analysis of Bcl‐2, Bax, p53 by real‐time polymerase chain reaction and western blot analysis of Bad and p53 protein were performed. Nanoformulated LC significantly inhibited growth and increased the apoptosis of colon cancer cells indicating its potential anti‐cancer activity against colon cancer cells.Inspec keywords: cancer, biological organs, cellular biophysics, drug delivery systems, drugs, nanomedicine, genetics, DNA, molecular biophysics, biochemistry, lipid bilayers, toxicology, suspensions, colloids, light scattering, X‐ray chemical analysis, solvation, enzymes, nanostructured materialsOther keywords: energy dispersive X‐ray spectroscopy, in vitro drug release, morphological changes, cell viability, cytotoxicity, apoptosis, cancer‐associated gene expression analysis, Bcl‐2, Bax, real‐time polymerase chain reaction, western blot analysis, Bad protein, p53 protein, scanning electron microscopy, dynamic light scattering, ultraviolet scattering, thin film hydration method, colloidal suspension, nanoformulated form CL‐SN38, 7‐ethyl‐10‐hydroxy‐camptothecin, anticolon cancer drug, colon cancer cells HCT15, cationic liposomal nanoformulated LC, targeted drug delivery, therapeutic potentials, Lycopodium clavatum, traditional medicines, cell replication, DNA repair, nonspecific actions, high systemic toxicity, chemotherapeutic agents, patient survival, colon cancer treatment, colon cancer diagnosis, CL‐LC, potential anticancer activity     

Experimental analysis of functional stability of sagittal split ramus osteotomies secured by miniplates and position screws

PURPOSE: This study determined the relative functional stabilities of various miniplate systems and configurations used to stabilize sagittal split ramus osteotomies (SSROs) and compared them with conventional internal screw fixation. MATERIALS AND METHODS: The biomechanical model was a reproducible prototype of a mandible sagittal osteotomy with consistent material and geometric properties. After advancing the distal segment by 7 mm, each set of mandible analogs (1 set = 3 analogs) was fixed bilaterally by one of three miniplate systems applied in various configurations, and tested with and without a supplemental 2.4-mm bicortical screw applied in the retromolar region. Reduced analogs were placed in a straining frame, and simulated masticatory loads were applied alternatively to the mandibular first molars. Ensuing osteotomy site displacements were measured by transducers attached to a computer-based data acquisition program. A coordinate transformation procedure was used to convert the component displacements captured by the individual transducers into a common "instability factor" to reflect fixation stability for each construct and loading condition. Instability factors for the individual constructs were compared with each other and with those obtained from analogs reduced exclusively with 2.4-mm position screws. RESULTS: Osteotomies stabilized with a combination of miniplates and position screws were more stable than those stabilized exclusively with miniplates (P < .0001). Post-hoc comparisons of mean instability factors (Dunnet's method) showed the miniplate-position screw combinations to be more stable than the 2.4-mm position screw system used as standard (P < .05). Miniplate systems alone were the least stable of the test constructs, with differential rates of failure between the individual miniplate systems. CONCLUSIONS: Exclusive use of miniplate fixation may not provide the consistent stability necessary for early functional restoration after SSROs. The addition of a position screw in the retromolar region substantially enhances the fixation stability of miniplate systems. The use of miniplates with retromolar position screws offers both technical and stability advantages over conventional miniplate or internal screw fixation. The fixation stability of the miniplate-position screw combination is independent of the type of miniplate system used.