PSA performances and viscoelastic properties of SIS‐based PSA blends with H‐DCPD tackifiers

Hotmelt pressure sensitive adhesives (PSAs) usually contain styrenic block copolymers like styrene–isoprene–styrene (SIS), SBS, SEBS, tackifier, oil, and additives. These block copolymers individually reveal no tack. Therefore, a tackifier is a low molecular weight material with high glass transition temperature (T_g), and imparts the tacky property to PSA. The SIS block copolymer with different diblocks was blended with hydrogenated dicyclopentadiene (H‐DCPD tackifier), which has three kinds of T_g. PSA performance was evaluated by probe tack, peel strength, and shear adhesion failure temperature. PSA is a viscoelastic material, so that its performance is significantly related to the viscoelastic properties of PSAs. We tested the viscoelastic properties by dynamic mechanical analysis and the thermal properties by differential scanning calorimeter to investigate the relation between viscoelastic properties and PSA performance. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 2839–2846, 2006     

Oxidative coupling of methane over Na+-ZrO2-C1-/Al2O3 catalysts

Oxidative coupling of methane (OCM) was carried out over Na⁺-ZrO₂-Cl /A1[₂O₃ catalysts in a temperature range from 1023 to 1123 K. The catalysts were prepared by impregnating the α- or γ-Al₂O₃ supports with sodium carbonate and/or zirconyl chloride. The OCM activity was examined using the catalysts prepared by three different preparation procedures. The best catalyst was the one prepared by subsequent impregnation of sodium carbonate-preimpregnated γ-Al₂O₃ with a mixed solution of sodium carbonate and zirconyl chloride. It was found that preimpregnated sodium played an important role in reducing the combustion activity of the γ-Al₂O₃. The catalyst with an optimal composition showed the highest C₂ selectivity and yield of 40.8% and 15.1%, respectively. From the X-ray diffraction analysis it was found that tetragonal ZrO₂ was formed and that NaCl existed in the catalysts with relatively high sodium contents.     

Experimental analysis of bubble mode in a plate-type absorber

An experimental analysis of ammonia-water absorption was performed in a plate-type absorber. The flow of water and ammonia gas was performed in the bubble mode. The experiments were made to examine the effects of solution flow rate and gas flow rate on the performance of the absorber. It was found that the increase of solution flow rate rarely affected the mass transfer, but improved the heat transfer. As the gas flow rate increased, slugging occurred in the bubble mode and influenced the thermal boundary layer. Finally, the results were converted into dimensionless numbers to elucidate physical phenomena and plotted as Sherwood number versus Reynolds number for mass transfer performance and Nusselt number versus Reynolds number for heat transfer performance.     

Study on the thermoplastic vulcanizate using ultrasonically treated rubber powder

Nowadays, waste EPDM (ethylene propylene diene monomer) increasingly has been causing significant environmental problems with increasing numbers of vehicles. From the perspective of the environment and economics, recycling is the best method to treat waste materials. This study investigated waste EPDM/PP (polypropylene) blends with waste EPDM. Waste EPDM powders were treated ultrasonically, which physically modifies the rubber particles to confer good mechanical properties. Also investigated were the relevance of the mass percentage of the dispersed phase, the influence of the geometry and rotation speeds of the screw used in extrusion, and the melting temperature of PP materials on the morphology and mechanical properties of the blend. The purpose of this study was to develop a valuable thermoplastic elastomer from waste EPDM. This study concentrated on determining the optimum conditions for producing a blend by extrusion, including parameters of screw geometry, screw rotational speed, and operating temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2503–2507, 2003     

Phase Regions and Kinetics of Formation of (Bi,Pb)2Sr2Ca2Cu3Ox in Ag-Sheathed Tape

Ag-sheathed (Bi,Pb)₂Sr₂Ca₂Cu₃O, (2223) tapes were made by the oxide-powder-in-tube method. Tapes were heat-treated isothermally at several different temperatures in 7.5% O₂/Ar, then quenched into oil to retain the phase assemblages at the reaction temperatures. 2223 formed between ∼810° and ∼837°C. The Avrami equation was applied to describe the kinetics of 2223 formation from a mixture of Bi₂Sr₂CaCu₂O _x and nonsuperconducting phases, mainly Ca₂PbO₄ and CuO. The calculated Avrami exponent, n ∼ 1, indicated that the kinetics in this system could be described as a diffusion-controlled, two-dimensional nucleation and growth process. The apparent activation energy for forming 2223 was ∼2900 kJ/mol from ∼817° to ∼825°C and ∼890 kj/mol from ∼825° to ∼837°C. A temperature-time-transformation diagram was constructed based on the kinetic data; it describes the transformational behavior of this particular system.     

Fabrication of a gradient refractive index preform using laminar shear mixing

A gradient refractive index rod was successfully prepared by a new fabrication method using laminar shear mixing, and a graded index polymer optical fiber that satisfied IEEE1394b was obtained from the method. To fabricate the gradient refractive index rod, a liquid monomer mixture with a relatively low refractive index was placed in a prepared cylindrical glass reactor and a transparent polymer rod with a higher refractive index was introduced at the center of the reactor. The reactor and the polymer rod were then rotated concurrently with a small rotating speed difference to generate a Couette flow in the liquid phase. The centrifugal force generated by rotation and the polymer diffusion into the liquid monomer mixture developed a graded concentration profile in a radial direction. The Couette flow could reduce the concentration fluctuation in a tangential direction. In addition, the graded index profile could be controlled by the copolymer composition of the rod and its diameter. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1100–1104, 2005     

Isothermal crystallization kinetics and melting behavior of nylon/saponite and nylon/montmorillonite nanocomposites

DSC thermal analysis and X‐ray diffraction have been used to investigate the isothermal crystallization behavior and crystalline structure of nylon 6/clay nanocomposites. Nylon 6/clay has prepared by the intercalation of ε‐caprolactam and then exfoliating the layered silicates by subsequent polymerization. The DSC isothermal results reveal that introducing saponite into the nylon structure causes strongly heterogeneous nucleation induced change of the crystal growth process from a two‐dimensional crystal growth to a three dimensional spherulitic growth. But the crystal growth mechanism of nylon/montmorillonite nanocomposites is a mixed two‐dimensional and three‐dimensional spherulitic growth. The activation energy drastically decreases with the presence of 2.5 wt % clay in nylon/clay nanocomposites and then slightly increases with increasing clay content. The result indicates that the addition of clay into nylon induces the heterogeneous nucleation (a lower ΔE) at lower clay content and then reduces the transportation ability of polymer chains during crystallization processes at higher clay content (a higher ΔE). The correlation among crystallization kinetics, melting behavior, and crystalline structure of nylon/clay nanocomposites is also discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2196–2204, 2004     

Temperature effect on the permeation through poly(2-hydroxyethyl methacrylate) membrane

The temperature dependence of permeability through highly syndiotactic poly(2-hydroxyethyl methacrylate) [P(HEMA)] membrane is reported for highly polar organic solutes such as ureas, methyl substituted ureas and amides, and for NaCl and Na₂SO₄. The membranes used were equilibrated in distilled water at each temperature before measurements. From the linear correlationship between the excess heat capacities, ?C_p^o(excess) in aqueous solution at infinite dilution and the permeability parameter PM^1/3, it is found that the water structure perturbing capability of the polar organic solutes is a controlling factor in the permeation mechanism at relatively low temperature, where P(HEMA) membrane has higher water content and more structured water. In addition, it is found that the poor separation for urea of cellulose acetate membrane in the reverse osmosis practice is due to the higher water structure-breaking capability of urea.     

Determination of Inversion Temperature of Sb2O3-Doped BaTiO3 Positive Temperature Coefficient of Resistivity (PTCR) Ceramics by the Finite Difference Method

The effect of the cooling rate on the PTCR (positive temperature coefficient of resistivity) characteristics of 0.1 mol% Sb₂O₃-doped BaTiO₃ ceramics has been investigated. Resistances both below and above the Curie temperature were increased by slow cooling, which indicated that the resistive layer width at the grain boundary increased as the cooling rate decreased. Concentration profiles of the Ba vacancies as a function of distance from the grain boundary have been simulated by the finite difference method. The inversion temperature of the 0.1 mol% Sb₂O₃-doped BaTiO₃ system was determined to be 1160°C from the measured electrical properties and computed concentration profiles.     

Preparation of porous thin films of a partially aliphatic polyimide

A thermally labile polymer, poly(propylene glycol), was modified to obtain PPG having an amino end group. PPG was incorporated into a partially aliphatic polyimide based on an alicyclic dianhydride, and this afforded triblock copolymers containing various amounts of PPG blocks. The thermal properties of the copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the PPG block in the copolymers was carried out at 240°C under various pressures to obtain porous polyimide films. The pores remained during the thermolysis under a reduced pressure of 710 mmHg, whereas they collapsed under (near) atmospheric pressure. The pore size increased as the amount of the PPG block in the copolymers increased. The dielectric constants of the porous polyimides varied from 2.60 to 2.42 with the original copolymer composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 532–538, 2006