3D Micromolding of Arrayed Waveguide Gratings on Upconversion Luminescent Layers for Flexible Transparent Displays without Mirrors,Electrodes, and Electric Circuits

A new technique for the fabrication of arrayed waveguide gratings on upconversion luminescent layers for flexible transparent displays is reported. Ho³⁺‐ and Yb³⁺‐codoped NaYF₄ nanoparticles are synthesized by hydrothermal techniques. Transparent films consisting of two transparent polymers on the NaYF₄ nanoparticle films exhibit mechanical flexibility and high transparence in visible region. Patterned NaYF₄ nanoparticle films are fabricated by calcination‐free micromolding in capillaries. Arrayed waveguide gratings consisting of the two transparent polymers are formed on the patterned NaYF₄ nanoparticle films by micromolding in capillaries. Green and red luminescence is observed from the upconversion luminescent layers of the NaYF₄ nanoparticle films in the arrayed waveguide gratings under excitation at 980 nm laser light. Arrayed waveguide gratings on the upconversion luminescent layers are fabricated with Er³⁺‐doped NaYF₄ nanoparticles which can convert two photons at 850 and 1500 nm into single photon at 550 nm. These results demonstrate that flexible transparent displays can be fabricated by constructing arrayed waveguide gratings on upconversion luminescent layers, which can operate in nonprojection mode without mirrors, transparent electrodes, and electric circuits.     

高温流化床的流化特性及结焦非流化行为

在 8 0 mm× 30 mm和 80 mm× 10 mm石英流化床中 ,以低温粘结的高密度聚乙烯和聚丙烯 ,高温粘结的玻璃珠为实验物料 ,研究了高温流化床的流化特性及高温下物料结焦产生的非流化行为。结果表明 ,在本文实验条件下 ,Geldart A、B类高温表面粘结物料 ,床层温度小于其最小粘结温度时 ,床层温度增大 ,颗粒的最小流化速度减小 ;Geldart D类高温表面粘结物料的最小流化速度随温度增加而增大。得出了不同温度下颗粒最小流化速度预测式。床层温度大于最小粘结温度时 ,流化床需在较高的表观气速下才能保持流化 ,床层温度愈高床层流化所需的表观气速越大。研究同时发现 ,颗粒物料的粒径减小 ,流化颗粒的最小粘结温度减小。     

Simultaneous induction of calcium transients in embryoid bodies using microfabricated electrode substrates

Precise control of differentiation processes of pluripotent stem cells is a key component for the further development of regenerative medicine. For this purpose, combining a cell-aggregate-size treatment for regulating intercellular signal transmissions and an electrical stimulation technique for inducing cellular responses is a promising approach. In the present study, we developed microfabricated electrode substrates that allow simultaneous stimulation of embryoid bodies (EBs) of P19 cells. Mouse embryonal carcinoma P19 cells can be induced to differentiate into three germ layers and serve as a promising stem cell model. Microcavity–array patterns were fabricated onto indium–tin–oxide (ITO) substrates using a standard photo-lithography technique, and uniform-sized EBs of P19 cells were inserted into each microcavity. Electrical stimulation was applied to the EBs through substrate electrodes and stimulus-induced intracellular calcium transients were monitored. We confirmed that the developed electrode device could simultaneously stimulate smaller (200 μm diameter) and larger (500 μm diameter) EBs inserted in the microcavities and induce specific spatio-temporal patterns of intracellular calcium transients in the EBs with fine reproducibility. We concluded that the developed microcavity array with embedded electrodes could simultaneously and effectively stimulate uniform-sized EBs inserted in it. Therefore, it is a promising experimental tool for precisely controlling cell differentiation processes.     

Determinations of rare earth element abundance and U-Pb age of zircons using multispot laser ablation-inductively coupled plasma mass spectrometry

We have developed a new calibration technique for multielement determination and U-Pb dating of zircon samples using laser ablation-inductively coupled plasma mass spectrometry (ICPMS) coupled with galvanometric optics. With the galvanometric optics, laser ablation of two or more sample materials could be achieved in very short time intervals (~10 ms). The resulting sample aerosols released from different ablation pits or different solid samples were mixed and homogenized within the sample cell and then transported into the ICP ion source. Multiple spot laser ablation enables spiking of analytes or internal standard elements directly into the solid samples, and therefore the standard addition calibration method can be applied for the determination of trace elements in solid samples. In this study, we have measured the rare earth element (REE) abundances of two zircon samples (Nancy 91500 and Pre?ovice) based on the standard addition technique, using a direct spiking of analytes through a multispot laser ablation of the glass standard material (NIST SRM612). The resulting REE abundance data show good agreement with previously reported values within analytical uncertainties achieved in this study (10% for most elements). Our experiments demonstrated that nonspectroscopic interferences on 14 REEs could be significantly reduced by the standard addition technique employed here. Another advantage of galvanometric devices is the accumulation of sample aerosol released from multiple spots. In this study we have measured the U-Pb age of a zircon sample (LMR) using an accumulation of sample aerosols released from 10 separate ablation pits of low diameters (~8 μm). The resulting (238)U-(206)Pb age data for the LMR zircons was 369 ± 64 Ma, which is in good agreement with previously reported age data (367.6 ± 1.5 Ma). (1) The data obtained here clearly demonstrate that the multiple spot laser ablation-ICPMS technique can become a powerful approach for elemental and isotopic ratio measurements in solid materials.     

Fabrication of heterostructures of halogen-bridged quasi-one-dimensional mixed-valence transition metal complexes

Single-heterostructure crystals of a series of halogen-bridged quasi-one- dimensional mixed-valence transition metal complexes (HMMCs) were fabricated by selective coordination epitaxial growth (SCE growth). The overgrowth crystals of the HMMC were grown on the columnar crystals of the substrate HMMC in solution. The single-heterostructure crystals were epitaxially grown only when the two HMMCs had similar crystal structures. If their crystal structures were different, no heterostructure crystal was grown. This result suggests that the degree of mismatch between the crystal structures of the substrate and the overgrowth is the predominant factor which determines the SCE growth of the HMMCs.     

9H-xanthene-2,7-diols as antioxidants for autoxidation of linoleic acid

The antioxidant activities of 9H-xanthene-2,7-diols and α-tocopherol were studied during the oxidation of linoleic acid in a homogeneous solution and in an aqueous micelle dispersion. The antioxidant activities of 9H-xanthene-2,7-diols for both systems were 1.0–2.4 times greater relative to α-tocopherol. In addition, the 1,3,4,5,6,8-hexamethylxanthene-2,7-diol showed less cytotoxicity toward human fibroblasts than did 2,6-di-t-butyl-4-methylphenol.     

Phase-slip centers of superconducting indium bridges with variable thickness in a magnetic field

We have measured current-voltage (I–V) curves in magnetic fieldsH, for indium variable-thickness bridges whose strips were quasi-one-dimensional superconductors. TheI–V curves take three different types depending on theH regions. One has hysteresis due to phase-slip centers. The others have no hysteresis. The critical current againstH shows hysteresis owing to the surface currents induced byH. The modification of the pair-breaking time was introduced to treat theH dependence of the hysteresis ofI–V curves.     

A three‐phase voltage‐source PWM inverter system characterized by sinusoidal output voltage with neither common‐mode voltage nor normal‐mode voltage

This paper deals with an inverter system integrating a small‐rated passive EMI filter with a three‐phase voltage‐source PWM inverter. The purpose of the EMI filter is to eliminate both common‐mode and normal‐mode voltages from the output voltage of the inverter. The motivation of this research is based on the well‐known fact that the higher the carrier or switching frequency, the smaller and the more effective the EMI filter. An experimental system consisting of a 5‐kVA inverter, a 3.7‐kW induction motor, and a specially designed passive EMI filter was constructed to verify the viability and effectiveness of the EMI filter. As a result, it is shown experimentally that both three‐phase line‐to‐line and line‐to‐neutral output voltages look purely sinusoidal as if the inverter system were an ideal variable‐voltage, variable‐frequency power supply when viewed from the motor terminals. This results in complete solution of serious issues related to common‐mode and normal‐mode voltages produced by the inverter. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 145(4): 88–96, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10206