Transient response of cylindrical shells to localized heat sources

An exact analysis of the dynamic problem on the thermal displacements and stresses of cylindrical shells subjected to instantaneous heating is carried out. Equations of motion for cylindrical shells, including the thermal effects, are reduced and solved by using the Fourier and Laplace transformation methods, after obtaining the temperature distribution determined from the nonstationary equation of heat conduction for a shell under a prescribed temperature field. Numerical results are presented for the thermal displacement and stresses due to the time variation together with the quasistatic ones.     

WTRLGD—A computer program for the transient analysis of waterlogged fuel rods under the RIA condition

A computer code WTRLGD has been developed to describe the transient internal pressure of a waterlogged fuel rod during power burst and also to predict the possibility of the rod failure in the mode of cladding rupture. The code predicts transient thermal behavior of the fuel rod on the basis of an assumption of axisymmetry, and thermal-hydraulic transients of the internal water on the basis of a homogeneous volume-junction model modified so as to involve the cladding deformation. Calculated transients of the rod pressure are in fairly good agreement with those measured in the NSRR experiments, simulating the fuel rod behavior under an RIA condition. The comparison between calculation and experiment verifies that the code is an effective tool for the prediction of the failure of a waterlogged fuel rod.     

Stress disturbance due to broken fibres in metal matrix composites with non-uniform fibre spacing

Premature fracture of weaker fibres causes stress disturbances in composites. These disturbances are affected by non-uniformity of fibre spacing. In order to evaluate quantitatively how the disturbances in metal matrix composites are affected by the extent of non-uniformity of fibre spacing, a method of calculation is presented on the basis of two-dimensional shear lag analysis. Static tensile stress concentrations in the intact fibres to broken fibres, tensile stress distribution along the fibre axis in the broken and intact fibres and shear stresses between broken and intact fibres were calculated by the method presented, using some examples. It is shown quantitatively that the spacing between broken and intact fibres and that between intact and next fibres has a significant influence on tensile stress concentrations in intact fibres and also on the shear stresses between broken and intact fibres: the narrower the former spacing and the wider the latter spacing, the higher become both tensile and shear stress concentrations. This tendency is enhanced when the number of broken fibres is large and when the strain hardening of the matrix is high.     

Filter-embedded design and its applications to passive components

A design in which a filter is embedded in a fiber fixed on a substrate is proposed. It was successfully applied to the fabrication of low loss fiber optic components for a single-mode fiber transmission system. These components have a wide operational temperature range. The design is easily adapted to a multifilter or multifiber component. Filter embedding is achieved in two ways. One is to insert a thin filter chip in a slit which is machined into a fiber fixed on a substrate by a dicing saw (filter inserted type). The other is to evaporate a filter film directly on a fiber end face and butt this fiber to another fiber on a guide groove on a substrate (filter evaporated type)     

Two‐dimensional unsteady heat conduction analysis with heat generation by triple‐reciprocity BEM

If the initial temperature is assumed to be constant, a domain integral is not needed to solve unsteady heat conduction problems without heat generation using the boundary element method (BEM).However, with heat generation or a non‐uniform initial temperature distribution, the domain integral is necessary. This paper demonstrates that two‐dimensional problems of unsteady heat conduction with heat generation and a non‐uniform initial temperature distribution can be solved approximately without the domain integral by the triple‐reciprocity boundary element method. In this method, heat generation and the initial temperature distribution are interpolated using the boundary integral equation. Copyright © 2001 John Wiley & Sons, Ltd.     

Surgical strategy for patients with pancreaticobiliary maljunction without choledocal dilatation

Theory-driven investigations are necessary for generalization of findings and development of health care policy. Within the environments where nurses practice, however, there often is insufficient time to develop a theory base that supports practice changes or the investigation of their effects. Theories that support such investigations need to incorporate elements associated with both the structure and the process of care delivered as well as the outcomes expected. These same theories also need to specify the focal level of interest for research questions. Incorporating a research template to guide practice investigations facilitates decision making and collection of data.     

Turbo decoding of concatenated channel coding and trellis shaping for peak power controlled single-carrier systems

Trellis shaping (TS) has found its application in the peak power control of band-limited single-carrier signals. Our recent work has demonstrated that a well-designed TS can control the symbol transitions such that the output signal has almost constant envelope, which significantly alleviates the linearity requirement of power amplifiers. Compared to transmission without constellation shaping, however, the TS involves signal constellation expansion exclusively for peak power control. Therefore, unlike trellis coded modulation (TCM) that increases the minimum Euclidean distances (MED), the TS decreases the MED, thus incurring the increase in signal-to-noise power ratio (SNR) required for achieving a certain error rate. In this letter, in order to overcome this drawback, we propose a serial concatenation of coding and shaping together with an effective decoding algorithm that utilizes the memory effect (i.e., error correcting capability) of the shaped symbols. The achievable performance of the proposed system is analyzed in terms of the average mutual information. The simulation results demonstrate that the iterative decoding of the proposed concatenated system with outer convolutional codes and inner trellis shaping offers a significant performance gain.     

FI Catalysts: A Molecular Zeolite for Olefin Polymerization

A bis(phenoxyimine) group 4 transition metal catalyst (now known as FI catalysts) can discern ethylene from a mixture of ethylene and propylene at more than 99% selectivity. Denisty function theory (DFT) calculations revealed a spatially confined reaction site in the transition states of the migratory insertion which is just the right size for an ethylene molecule but too small for a propylene one. The substituents adjacent to the phenoxy‐oxygens are of crucial importance in developing the size/shape‐selectivity.     

Indoor air quality,air exchange rates,and radioactivity in new built temporary houses following the Great East Japan Earthquake in Minamisoma,Fukushima

This study measured air exchange rates, indoor concentrations of aldehydes and volatile organic compounds (VOCs), and radioactivity levels at 19 temporary houses in different temporary housing estate constructed in Minamisoma City following the Great East Japan Earthquake. The 19 surveyed houses represented all of the companies assigned to construct temporary houses in that Minamisoma City. Data were collected shortly after construction and before occupation, from August 2011 to January 2012. Mean air exchange rates in the temporary houses were 0.28/h, with no variation according to housing types and construction date. Mean indoor concentrations of formaldehyde, acetaldehyde, toluene, ethylbenzene, m/p‐xylene, o‐xylene, styrene, p‐dichlorobenzene, tetradecane, and total VOCs (TVOCs) were 29.2, 72.7, 14.6, 6.35, 3.05, 1.81, 7.29, 14.3, 8.32, and 901 μg/m³, respectively. The levels of acetaldehyde and TVOCs exceeded the indoor guideline (48 μg/m³) and interim target (400 μg/m³) in more than half of the 31 rooms tested. In addition to guideline chemicals, terpenes (α‐pinene and d‐limonene) and acetic esters (butyl acetate and ethyl acetate) were often detected in these houses. The indoor radiation levels measured by a Geiger–Müller tube (Mean: 0.22 μSv/h) were lower than those recorded outdoors (Mean: 0.42 μSv/h), although the shielding effect of the houses was less than for other types of buildings.