日本中小型办公楼的节能措施

本文以本公司某大楼为例，通过收集和分析设备运行、环境状态相关的实测数据，探索研究行之有效的节能措施，并取得成效。     

Fine tuning of frontier orbital energy levels in dithieno[3,2-b:2′,3′-d]silole-based copolymers based on the substituent effect of phenyl pendants

A series of dithieno[3,2-b:2′,3′-d]silole-based π-conjugated copolymers containing thieno[3,4-c]pyrrole-4,6-dione or thieno[3,4-b]thiophene units bearing 4-substituted phenyl pendants were synthesized and their thermal stability, optical properties and frontier orbital energy levels were systematically investigated. The introduction of electron-withdrawing substituents on the phenyl rings lowered their frontier orbital energy levels without deteriorating their thermal and optical properties. By replacing an electron-donating methoxy group with an electron-withdrawing trifluoromethyl group, both the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital energy levels of the polymers were deepened by more than 0.3 eV. A relatively linear relationship was observed between the HOMO energy levels and the Hammett substituent constants.     

Removing of central nervous tissues from dressed carcasses: Washing with a low concentration of lactic acid in spraying cabinet

The efficiency of using lactic acid (LA) as a surface decontaminator for carcasses contaminated with spinal chord (SC) tissues was evaluated. Four representative places with surface area of 5 × 5 cm, were marked on the inner side of the porcine carcasses. 0.200 μl of 0.5% SC solution was applied to each marked area and separately washed in a specially designed spraying cabinet, which comprises 15 nozzles adjusted to spray 1% LA or tap water with a scatter pressure of 0.49 MPa. Samples were collected after washing for 15, 30, 60 and 90 s and analyzed by Ridascreen kit ELISA test. 1% LA reduces the SC materials to pre-contaminated levels while having negligible effect on the color of carcasses. Furthermore washing with LA insignificantly reduced the total microbial counts. Using very low concentration of LA (1%) in production lines of slaughter houses may help to decontaminate the carcasses to some extent without having adverse impact on quality attributes.     

Cell Profiling Based on Sugar-Chain–Cell Binding Interaction and Its Application to Typing and Quality Verification of Cells

Developing methods to determine cell type and cell state has been a significant challenge in the field of cancer diagnosis as well as in typing and quality verification for cultured cells. Herein, we report a cell profiling method based on binding interactions between cell-surface sugar-chain-binding proteins and sugar-chain-immobilized fluorescent nanoparticles (SFNPs), together with a method for cell typing and cell quality verification. Binding profiles of cells against sugar chains were analyzed by performing flow cytometry analysis with SFNPs. Discrimination analysis based on binding profiles could classify cell type and evaluate the quality of cultured cells. By applying our method to differentiated cells originating from conventional cell lines and also to mouse embryotic stem cells, we could detect the cells before and after differentiation. Our method can be utilized not only for the biofunctional analysis of cells but also for diagnosis of cancer cells and quality verification of cultured cells.     

Seedless growth of zinc oxide flower-shaped structures on multilayer graphene by electrochemical deposition

A seedless growth of zinc oxide (ZnO) structures on multilayer (ML) graphene by electrochemical deposition without any pre-deposited ZnO seed layer or metal catalyst was studied. A high density of a mixture of vertically aligned/non-aligned ZnO rods and flower-shaped structures was obtained. ML graphene seems to generate the formation of flower-shaped structures due to the stacking boundaries. The nucleation of ZnO seems to be promoted at the stacking edges of ML graphene with the increase of applied current density, resulting in the formation of flower-shaped structures. The diameters of the rods/flower-shaped structures also increase with the applied current density. ZnO rods/flower-shaped structures with high aspect ratio over 5.0 and good crystallinity were obtained at the applied current densities of −0.5 and −1.0 mA/cm². The growth mechanism was proposed. The growth involves the formation of ZnO nucleation below 80°C and the enhancement of the growth of vertically non-aligned rods and flower-shaped structures at 80°C. Such ZnO/graphene hybrid structure provides several potential applications in sensing devices.     

Reversible cross-linking reactions of alkoxyamine-appended polymers under bulk conditions for transition between flow and rubber-like states

Reversible cross-linking reactions of alkoxyamine-appended polymers with low glass transition temperature (T_g) were successfully carried out under bulk conditions. The low-T_g polymers with alkoxyamine units in the side chains were synthesised by radical copolymerisation of 2-ethylhexyl acrylate and two kinds of alkoxyamine-containing acrylate monomers. By heating the low-T_g polymers under bulk conditions at 100 °C, cross-linked polymers were formed by radical exchange reactions between alkoxyamine units, and a transition from a liquid-like flowable polymer state to a rubber-like polymer state was confirmed. A de-cross-linking reaction was also accomplished by radical exchange reactions between the cross-linked polymers and an added alkoxyamine-containing small molecule or stable nitroxyl radical, which resulted in transition to the flowable state again. The structural transition between low-T_g linear polymers and cross-linked polymers were characterised by ¹H and ¹³C NMR spectroscopy, Fourier transform infrared spectroscopy, rheology measurement, swelling experiment, and gel permeation chromatography measurement.     

Synthesis of novel ABA triblock and (ABA)n multiblock copolymers comprised of polyisobutylene and poly(γ-benzyl-l-glutamate) segments

The synthesis of ABA triblock copolymers comprised of polyisobutylene (PIB) and poly(γ-benzyl-l-glutamate) (PBLG) segments has been demonstrated for the first time by the polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (BLG-NCA) initiated with well-defined α,ω-primary amino-functional PIBs. The ammonium-mediated polymerization of BLG-NCA provided better control of molecular weights and lower polydispersity indices (PDIs) compared to the conventional polymerization. The compositional homogeneity of the block copolymers has been confirmed by GPC-MALLS and ¹H NMR spectroscopy. Since the resulting ABA triblock copolymer possessed primary amino groups at α,ω-ends, further extension reaction with 4,4′-methylene-bis(phenyldiisocyanate) was possible to afford a novel (ABA)_n multiblock copolymer.     

All-conjugated diblock copolymer of poly(3-hexylthiophene)-block-poly(3-phenoxymethylthiophene) for field-effect transistor and photovoltaic applications

The electronic properties, morphology and optoelectronic device characteristics of conjugated diblock copolythiophene, poly(3-hexylthiophene)-block -poly(3-phenoxymethylthiophene) (P3HT-b-P3PT), are firstly reported. The polymer properties and structures were explored through different solvent mixtures of chloroform (CHCl₃), dichlorobenzene (DCB), and CHCl₃:DCB (1:1 ratio). The absorption maximum (λ_max) of P3HT-b-P3PT prepared from DCB was around 554 nm with a shoulder peak indicative for the highly crystalline structure around 604 nm while that from CHCl₃ was 516 nm without the clear shoulder peak. The field-effect hole mobility of P3HT-b-P3PT increased from ～6.0 × 10^?3, ～8.0 × 10^?3 to ～2.0 × 10^?2 cm² V^?1 s^?1 as the DCB content in the solvent mixture enhanced. The AFM images suggested that the highly volatile CHCl₃ processing solvent led to the amorphous structure, on the other hand, less volatile DCB resulted in the largely crystalline structure of the P3HT-b-P3PT. Such difference on the polymer structure and hole mobility led to the varied power conversion efficiency (PCE) of the photovoltaic cells fabricated from the blend of P3HT-b-P3PT/[6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) (1:1, w/w): 1.88 (CHCl₃), 2.13 (CHCl₃:DCB (1:1)), and 2.60% (DCB). The PCBM blend ratio also significantly affected the surface structure and the solar cell performance. The PCE of polymer/PCBM could be improved to 2.80% while the ratio of polymer to PCBM went to 1:0.7. The present study suggested that the surface structures and optoelectronic device characteristics of conjugated diblock copolymers could be easily manipulated by the processing solvent, the block segment characteristic, and blend composition.