Morphology control of titanium oxides by tetramethylammonium cations in hydrothermal conditions

The effect of tetramethylammonium cations (TMA⁺) on TiO₂ crystal morphology in hydrothermal conditions has been studied. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) methods. The morphologies including besom-like particle, nanosheet and nanotube have been observed. The different ways TMA⁺ cations in the hydrothermal bases affect the crystal growth manner are suggested to be responsible for the different morphologies of the as-synthesized samples.     

Dissolution processes,hydrolysis and condensation reactions during geopolymer synthesis: Part II. High Si/Al ratio systems

The mechanisms of speciation of aluminate and silicate phases during dissolution and condensation stages of alumino-silicate geopolymer reactions characterised by Si/Al ≥ 3, have been investigated and the results compared to predictions of the partial charge model. Solid-state nuclear magnetic resonance (NMR) traces indicate that free [Al(OH)₄]⁻ species, present in lower silicate formulations such as Si/Al ≤ 1, do not occur in the present systems, suggesting that the condensation reaction between [Al(OH)₄]⁻ and silicate species is fairly quick and is consumed as soon as it is formed. This observation is also consistent with both calorimetric measurements and model predictions, as the condensation time increased exponentially with increased Si/Al ratio in the geopolymeric phase, indicating again that the high content of Al species in the gel phase greatly enhanced the condensation rate. The experimental observations suggest that the condensation process in these systems occurs in two stages: (a) quick condensation between aluminate and silicate species; followed by (b) a slow condensation stage solely involving silicate species.     

纺织信息的网上检索方法

主要介绍在网上检索纺织信息的几种方法和处理技术，为人们检索纺织信息提供了方便快捷的途径。     

Improved shape evolution of copper interconnects prepared by jet-stream etching

In the preparation of copper interconnects in the conductor pattern of a printed circuit board (PCB), wet etching processes are commonly adopted for creating patterns of high-density interconnects. Currently available techniques of immersion and spray etching could lead to poorly shaped wires due to complex flow fields or the disturbing puddling effect. A modified technique of arrayed jet-stream etching was developed in this work, aiming at producing well-defined copper interconnects on a PCB in a significantly shorter time. The results were appealing in that copper interconnects of 35/140 μm (thickness/width) exhibiting etching factors of greater than 6 were obtained in 20 s, much better than the conventional ones with etching factors of 3 to 5 and etching times of at least 2 min. In addition, uniformly etched copper interconnects with less than 20 μm undercuts were observed on one etching line. One additional point to note is that no banking agents or inhibitors as commonly seen in conventional etching techniques were needed in this new processing method.     

Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Performance of the polymer- and oxide-supported triphase catalysts and effect of ultrasound on their stabilities

In this study, several trialkylamines were immobilized on chloromethylated polystyrene (CMPS), silica gel, and alumina to prepare triphase catalysts for catalyzing the etherification reaction of allyl bromide (the organic reactant) and sodium phenolate (the aqueous reactant). The reactor was agitated mechanically or with the aid of ultrasonic vibration. Performances of the prepared catalysts were compared, and the effect of imposing ultrasound was investigated based on the activity, selectivity, and stability of the catalyst. Experimental results show that tri-n-propylamine is the best active species when CMPS is used as the support, while tri-n-butylamine is the best when SiO₂ and Al₂O₃ are employed as the supports. The CMPS-supported catalyst is far better than the SiO₂- and Al₂O₃-supported catalysts in activity and selectivity but not in stability. Imposing the ultrasound can effectively increase the reaction rate. Mechanical agitation at a low speed with the imposition of ultrasonic vibration not only results in a conversion slightly higher than the case with a high mechanical agitation speed without ultrasonic vibration, but also gives a constant stability for the CMPS-supported catalyst.     

A novel in situ synthesis of dicalcium phosphate dehydrate nanocrystals in biodegradable polymer matrix

In the paper, we found a novel method to synthesize dicalcium phosphate dehydrate (DCPD) nanocrystals by in situ reaction in biodegradable PDLLA matrix. Calcium hydrid was selected as calcium source of DCPD, which is different from general methods. The method is not only simple and effective to synthesize Ca–P particles, but also can avoid the aggregation of inorganic nanoparticles in the course of their being dispersed into polymer matrix.     

筛查基因突变的新技术——循环双脱氧指纹图谱法及其应用

建立了适用于大批量标本基因突变筛查的双脱氧指纹图谱法即ｄｄＦ。该技术民测定ＤＮＡ序列的双脱氧末端终止法及ＳＳＣＰ二者长处于一身，即只作一个双脱氧末端终止反应，然后将反应产物在与ＳＳＣＰ相同的电泳条件下进行聚丙烯酰胺凝胶电泳，这样有突变的样品不会漏检，阳性检出率高达１００％。     

Rapid synthesis of La0.7Sr0.3MnO3+λ catalysts by microwave irradiation process

Microwave irradiation processing (MIP) was considered as a potential method to synthesize perovskite-type oxides rapidly, cleanly and energy-efficiently. In this paper, La_0.7Sr_0.3MnO_3+λ, a kind of promising catalyst for automobile exhaust purification, was successfully prepared by MIP in not more than 5 min. The sol–gel method was also used for comparison. All the samples were evaluated by catalytic activity tests in the simulated exhaust and characterized by XRD, BET, TEM and XRF analyses. The results showed that the integrated perovskite-type phase and uniform particle size were obtained in the microwave-treated samples. And those ones exhibited a better oxidation activity under slightly oxygen-rich condition than that by sol–gel method, which may be related to more A-site cation vacancies and larger bulk oxygen content generated in MIP. Possible formation mechanism of perovskites in MIP was also discussed.