In situ polymerization and characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nano‐silica composites were obtained via in situ polymerization and investigated by Fourier‐transform infrared spectroscopy (FTIR), or FTIR coupled with attenuated total reflectance (FTIR‐ATR), Transmission electron microscopy (TEM), atomic force microscopy (AFM), an Instron testing machine, dynamic mechanical analysis (DMA) and ultraviolet‐visible spectrophotometry (UV‐vis). FTIR analysis showed that in situ polymerization provoked some chemical reactions between polyester molecules and nano‐silica particles. FTIR‐ATR, TEM and AFM analyses showed that both surface and interface contained nano‐silica particles. Instron testing and DMA data showed that introducing nano‐silica particles into polyurethane enhanced the hardness, glass temperature and adhesion strength of polyurethane to the substrate, but also increased the resin viscosity. UV‐vis spectrophotometry showed that nano‐silica obtained by the fumed method did not shield UV radiation in polyurethane films. Copyright © 2003 Society of Chemical Industry     

TD-SCDMA技术及市场分析

TD-SCDMA技术优势 2000年5月,在土耳其伊斯坦布尔召开的国际电联大会上,TD-SCDMA被国际电联接纳为第三代移动通信系统标准之一,这标志着中国在移动通信技术领域已经进入世界先进行列.     

POWER OPTIMIZATION OF FINITE STATE MACHINE BASED ON GENETIC ALGORITHM

Using state assignment to minimize power dissipation and area for finite state machines is computationally hard.Most of published results show that the reduction of switching activity often trades with area penalty.In this paper,a new approach is proposed.Experimental results show a significant reduction of switching activity without area penalty compared with previous publications.     

High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Dreamweaver UltraDev环境下实现数据库的动态链接

简要论述了如何在Dreamweaver UltraDev环境下实现对已有的Access或Excel数据库的动态链接的操作。在Dreamweaver UltraDev环境下，实现对企业、事业单位原有Access或Excel数据库的动态链接，可以在很短的时间内开发出符合单位实际情况的信息管理系统，并且可以使这类已经创建好的数据信息，不加任何修改地与外部进行交流，实现资源共享。将此系统以主页的形式链入Internet，可以实现开放式管理体系。     

Predicting chain conformation and entanglement of polymers from chemical structure

The characteristic ratio C_∞ and the entanglement molecular weight M_e are two key molecular parameters that control melt viscoelasticity, solid mechanical (brittle/ductile) behavior, and adhesion of polymers. We show that the characteristic ratio C_∞ and the entanglement molecular weight M_e can be predicted from chemical structure by group additivity with uncertainties usually less than ～ 7% for C_∞ and ～ 15% for M_e, comparable with the accuracies of experimental values.     

Conformational effects in the reversed-phase chromatographic behavior of recombinant human growth hormone (rhGH) and N-methionyl recombinant human growth hormone (Met-hGH).

This paper examines the retention behavior of recombinant DNA-derived human growth hormone (rhGH) in reversed-phase chromatography and its separation from the closely related N-methionyl variant (Met-hGH). It is first shown that retention for rhGH decreases with increasing column temperature when 1-propanol (1-PrOH) is used as organic modifier. On the other hand, retention increases with temperature when acetonitrile (CH3CN) is employed. The differences in behavior for the two organic modifiers could be related to conformational changes in the protein as determined by solution and adsorption intrinsic fluorescence spectroscopy. Specifically, desorption and elution of rhGH using 1-PrOH could be correlated with a solvent-induced conformational change, with retention decreasing with increasing temperature due to the increasing ease of structural alteration. On the other hand for CH3CN the increase in retention correlated with temperature rise was related to a partial structural change yielding a more hydrophobic species. In this case, a surface-driven process is suggested. The work then turned to the separation of rhGH and Met-hGH where it was found for both organic modifiers optimum separation occurred at 45 degrees C and pH 6.5. Separate studies revealed that during the conformational change Met-hGH appeared more hydrophobic than rhGH since protein-protein aggregation was observed at a lower 1-PrOH concentration. It is suggested that this hydrophobic difference, which was optimized under the conditions cited above, resulted in the separation. The study demonstrates the importance of conformational changes in retention behavior and separation of protein samples.     

Uncertainty analysis and allocation of joint tolerances in robot manipulators based on interval analysis

Many uncertain factors influence the accuracy and repeatability of robots. These factors include manufacturing and assembly tolerances and deviations in actuators and controllers. The effects of these uncertain factors must be carefully analyzed to obtain a clear insight into the manipulator performance. In order to ensure the position and orientation accuracy of a robot end effector as well as to reduce the manufacturing cost of the robot, it is necessary to quantify the influence of the uncertain factors and optimally allocate the tolerances. This involves a study of the direct and inverse kinematics of robot end effectors in the presence of uncertain factors. This paper focuses on the optimal allocation of joint tolerances with consideration of the positional and directional errors of the robot end effector and the manufacturing cost. The interval analysis is used for predicting errors in the performance of robot manipulators. The Stanford manipulator is considered for illustration. The unknown joint variables are modeled as interval parameters due to the inherent uncertainty. The cost-tolerance model is assumed to be of an exponential form during optimization. The effects of the upper bounds on the minimum cost and relative deviations of the directional and positional errors of the end effector are also studied.     

Preparation and gas-sensing characteristics of nanocrystalline spinel zinc ferrite thin films

Zinc ferrite is a promising sensor material. In this paper, thin films of nanocrystalline zinc ferrite were deposited on alumina substrates by nebulization of a 0.01-M solution of a mixture of ZnCl/sub 2/ and FeCl/sub 3/ in ethanol (Zn:Fe=1:2) followed by pyrolysis and annealing in flowing air. The resulting films were characterized by X-ray diffraction and scanning electron microscopy, and the gas-sensing properties of as-deposited films were also investigated.     

A fuzzy-based impulse noise detection and cancellation for real-time processing in video receivers

In this paper, a simple fuzzy-based algorithm to remove the impulse noise from images is proposed. To achieve real-time applications, the proposed filter architecture, which combines fuzzy noise detection and noise filtering, is also designed. With low computational complexity, simulation results show that the proposed filters effectively remove the impulse noise.