配置抗冲切钢筋的混凝土异形柱-板柱连接试验研究

在9个柱截面为三种典型异形柱(十字形、T形和L形) -板柱连接未配置抗冲切钢筋时的冲切特性试验基础上,以十字形柱-板柱连接为代表,通过三个配置抗冲切钢筋试件与三个未配抗冲切钢筋试件的对比试验,研究了异形柱-板柱连接配置抗冲切钢筋后的冲切特性,同时将锚栓和箍筋的抗冲切性能进行了对比。试验结果表明,抗冲切钢筋可以有效地提高板的受冲切承载力和延性,在改善延性方面,锚栓比箍筋更有效。另外,将国外几个主要规范ACI3 18、BS8110及MC90 ,关于对非矩形荷载面冲切临界截面周长的规定进行了比较,从试验结果看,ACI3 18规范的取法更合理。     

Introducing fuzziness in object models and database interfaces through aspects

Imperfection in information can be considered a crosscutting concern that manifests itself in diverse kinds of imprecision, uncertainty, or inconsistency in the data models of a software system. The extension of existing programming and querying interfaces for the different aspects of information imperfection requires a proper modularization of the different concerns of numerical imprecision handling, so that the extensions do not interfere with existing programming practices and do not obscure the original design. Aspect‐oriented design (AOD) enables such a form of nonintrusive extensions to be added to existing software libraries, clearly separating fuzziness or other imperfections in data as a differentiated concern that can be considered from the early phases of development. In this article, a general framework for aspect‐based extension of data models and fuzzy databases is described, and some design and implementation issues of such AOD‐based extensions on OJB database libraries are described as a case study. © 2006 Wiley Periodicals, Inc. Int J Int Syst 21: 1199–1216, 2006.     

一种PN码自适应捕获门限的改进算法

文献[1]提出了一种用于直扩系统的PN码自适应门限算法。但该文献也指出,此算法对门限总数十分敏感。当门限总数设置不当时,系统的平均捕获时间将显著增加。这限制了该算法在实际中的应用。本文就此提出了改进,给出了算法及电路框图。仿真结果表明,与原方案相比,改进算法改善了对门限总数的敏感性,降低了PN码平均捕获时间。     

Aerobic degradation by white‐rot fungi of trichloroethylene (TCE) and mixtures of TCE and perchloroethylene (PCE)

BACKGROUND: Trichloroethylene (TCE) and perchloroethylene (PCE) are considered among the most important groundwater pollutants around the world. These compounds are usually found together in polluted environments but little is known about the ability of microorganisms to simultaneously degrade TCE and PCE. RESULTS: Data showed that several species of white‐rot fungi, including Trametes versicolor, Ganoderma lucidum, and Irpex lacteus, degrade substantial levels of TCE in pure culture. T. versicolor was chosen for further study since it degraded higher levels of TCE than the other organisms. Initial glucose concentration and reoxygenation of samples increased the amount of TCE dechlorination, but no significant difference in percentage TCE degradation was observed. T. versicolor was able to degrade 34.1 and 47.7% of PCE and TCE added as mixtures (containing 5 and 10 mg L⁻¹, respectively). CONCLUSIONS: The degradation ability of TCE was extended to other species of white‐rot fungi. Percentage degradation as well as chloride release from mixtures of TCE and PCE showed that T. versicolor degrades mixtures of TCE and PCE almost as well as its ability to degrade individually added TCE or PCE. The results suggest the potential promise of T. versicolor for bioremediation of TCE and PCE in the environment. Copyright © 2008 Society of Chemical Industry     

Characterization of Thai limestone for desulphurization in a fluidized bed combustor

The objective of this study is to determine the chemical kinetics of desulphurization of Thai limestone in an atmospheric fluidized bed combustor (AFBC). The experiments, which employed the batch technique using the limestone samples from six major sources in Thailand, were performed in a laboratory‐scale AFBC. The results obtained were analysed and correlated in the form of apparent reaction rate and deactivation rate constants as a function of operating conditions of the furnace and their properties, respectively. The formulae derived from these correlations were kept as general as possible in order that they could be used as input parameters for the selected mathematical model of desulphurization in an AFBC that is suitable for practical use. The predicted results were in good agreement with the experimental data reported in the literature. Copyright © 2003 John Wiley & Sons, Ltd.     

转炉冶炼20CrMo钢的生产实践

介绍了石家庄钢铁有限公司转炉生产20CrMo钢的工艺技术及其产品质量状况和这一新工艺所带来的显著效益。     

湿法成形薄型陶瓷砖的干燥

分析了湿法成形薄型陶瓷砖干燥的特点．具体讨论了微波干燥和少空气干燥方式在湿法薄形陶瓷砖干燥上中应用及干燥过程中坯体传动方式的选择。     

上海如何发展循环经济

上海是个资源匮乏、环境容量有限的大都市。随着经济的发展,资源需求和环境污染问题日益突出。如果继续走传统经济发展之路,只能削弱上海经济发展的后劲,阻碍上海可持续发展战略的实施。因此,研究如何发展循环经济,对于上海解决环境与发展的矛盾,增强国际竞争力都具有十分重要的意义。1 上海开展循环经济面临的形势 从国际形势看,许多发达国家正把发展循环经济、建立循环型社会,作为实现环境与经济协调发展的重要途径,并在循环经济的探索和实践中取得了显著的成效。如杜邦化学公司采用的3R制造法、丹麦卡伦堡生态工业区、德国生活垃     

VFP中增量备份的实现

介绍数据库应用中增量备份的含义，并介绍利用VFP具体实现的一个例子。