Furnace grown gate oxynitride using nitric oxide (NO)

Gate oxynitride was grown in NO for the first time. This approach can provide a tight N accumulation near the Si/SiO₂ interface. Much lower thermal budget is required for an NO process than for an N₂O process to produce an oxynitride with useful properties. Submicron MOSFET's with NO oxynitride showed superior current drive characteristics and comparable hot carrier immunity to those with N₂O oxynitride     

Improvements of the T-Ω method for 3-D eddy currentanalysis

An improved T-Ω method that can analyze magnetic fields produced not only by eddy currents but also by magnetizing currents is proposed. The method is applied to the analysis of 3-D eddy-current models with holes. The usefulness of the method is investigated by comparing calculated results with measured results and with results obtained by the A-Φ method. The T-Ω method has the advantage that the CPU time can be considerably reduced when most of the analyzed region is current-free and the eddy current flows two-dimensionally. The method is especially effective when the shape of the winding is simple and the distribution of magnetizing current is known beforehand. It is not effective when most of the analyzed region is current-carrying     

Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Optical bistability and set-reset operation of a Fabry-Perotsemiconductor laser amplifier with two detuned light injections

Optical bistability in a Fabry-Perot semiconductor laser amplifier when two optical inputs detuned from the resonant wavelength of a semiconductor laser amplifier are injected is discussed. A split branch is found in the optical output versus input characteristics in addition to conventional optical bistability behavior. It is shown analytically and experimentally that set and reset can be achieved in the optical output of the semiconductor laser amplifier for each wavelength by applying two detuned optical pulses and using the split branch     

A 64-Mb DRAM with meshed power line

A 64-Mb dynamic RAM (DRAM) has been developed with a meshed power line (MPL) and a quasi-distributed sense-amplifier driver (qDSAD) scheme. It realizes high speed, t_RAS=50 ns (typical) at V_cc=3.3 V, and 16-b input/output (I/O). This MPL+qDSAD scheme can reduce sensing delay caused by the metal layer resistance. Furthermore, to suppress crosstalk noise, a V_SS shield peripheral layout scheme has been introduced, which also widens power line widths. This 64-Mb DRAM was fabricated with 0.4-μm CMOS technology using KrF excimer laser lithography. A newly developed memory cell structure, the tunnel-shaped stacked-capacitor cell (TSSC), was adapted to this 64-Mb DRAM     

A 10 bit 20 MS/s 3 V supply CMOS A/D converter

A 10 bit CMOS A/D converter with 3 V power supply has been developed for being integrated into system VLSI's. In this A/D converter, redundant binary encoders named “twin encoders” enhance tolerance to substrate noise, together with employing differential amplifiers in comparators. The bias circuit using a replica of the amplifier is developed for biasing differential comparators with 3 V power supply. Subranging architecture along with a multilevel tree decoding structure improves dynamic performance of the ADC at 3 V power supply. The A/D converter is fabricated in double-polysilicon, double-metal, 0.8 μm CMOS technology. The experimental results show that the ADC operates at 20 MS/s and the twin encoders suppress the influence of substrate noise effectively. This ADC has a single power supply of 3 V, and dissipates 135 mW at 20 MS/s operation     

Surgical treatment of ventricular tachycardia after surgical repair of tetralogy of Fallot. Relation between intraoperative mapping and histological findings

BACKGROUND: The mechanism of ventricular tachycardia (VT) after correction of tetralogy of Fallot (TF) is poorly understood. The purpose of this study was to examine the histopathology of the arrhythmogenic area detected by intraoperative mapping. METHODS AND RESULTS: The patients were three men who underwent radical surgery for TF at age 3, 3, or 5 years, respectively. VT developed at 8, 9, or 11 years, respectively, after surgery, and shock developed during VT in every case. The ECG revealed monomorphic VT in two cases and polymorphic VT in one case. Induction of VT resulted in a wide left-axis deviation-pattern QRS with cycle lengths varying between 260 and 330 milliseconds. The VT origin was identified at the right ventricular outflow tract (RVOT). A radical operation was performed with the patient under cardiopulmonary bypass. On epicardial mapping, delayed activation of the RVOT was recorded during sinus rhythm, and clockwise circus movement of the macroreentry current during VT on the right ventricular free wall was documented in each case. The VTs were treated successfully by surgical resection and cryoablation of the myocardium. In every patient, histology of the myocardial specimens showed degeneration, adiposis, fibrosis, inflammatory cell infiltration, and scattered myocyte islets. These lesions corresponded anatomically to the area of myocardium in which delayed activation was evident during epicardial mapping. CONCLUSIONS: The results of this study indicate that patients with VT after radical correction of the TF have abnormal histopathological findings at the site of the prior right ventriculotomy scar. These lesions were noted within the region of delayed activation found during epicardial mapping and were found to be a part of the reentrant circuit.     

Disaccharide analysis of human skin glycosaminoglycans in sun-exposed and sun-protected skin of aged people

The negative conduction effect of quinidine on each of the successive phases of the ventricular depolarization was investigated using an original noninvasive method: the spatial velocity electrocardiogram of the QRS complex (SVECG-QRS). We performed a randomized placebo-controlled trial in 10 healthy subjects with a single oral dose of quinidine (330 mg) or placebo. Electrocardiographic acquisition and processing (220 recordings for the complete trial) were performed using the Lyon vectorcardiographic program. For each SVECG-QRS curve, the position of seven specific points from A (onset of QRS) to G (end of QRS) were determined precisely. The six successive time intervals between these points (AB-FG) and five velocity values (B-F) were then calculated. The QRS complex was longer under quinidine than placebo (102.4 +/- 1.6 vs. 100.3 +/- 1.5 ms). The difference was at the periphery of statistical significance (p = 0.05), and this lack of statistical difference may be mainly due to the low serum levels of quinidine obtained at the peak of the concentration (1.46 +/- 0.4 mg/1). All six QRS time intervals were longer under quinidine, but only the BC interval was significantly different (9.3 +/- 1.1 vs. 18.8 +/- 1.1 ms; p < 0.05) suggesting a more pronounced negative conduction effect at the onset of ventricular depolarization. No significant modifications were observed for the velocity values. We conclude that (1) the negative conduction effect of quinidine is heterogeneous, but a further study with a higher dose of quinidine (concentration-dependent effect) is required to confirm this hypothesis and (2) the spatial velocity electrocardiogram of the QRS complex allows a detailed analysis of the ventricular conduction phases. The results of the measurement were found to be reproducible. This noninvasive tool could be used in clinical practice to assess effects of antiarrhythmic drugs on successive ventricular depolarization phases.     

Late phase II trial of oral etoposide administered for 21 consecutive days in patients with cervical cancer. ETP 21 Study Group--Cervical Cancer Group

We conducted a multi-site late phase II trial of oral etoposide administered for 21 consecutive days in patients with cervical cancer in cooperation with 32 institutes. Fifty mg/body of oral etoposide was administered daily for 21 consecutive days. Treatment cycles were to be repeated at 4- to 5-week intervals. Eighty patients were enrolled and 70 patients were evaluated. The overall response rate (95% CI), including one complete response patient and 18 partial response patients, was 27.1% (19/70). The most commonly observed toxicity was myelosuppression such as leukopenia, neutropenia, hemoglobin decrease and thrombocytopenia. Other adverse effects were gastrointestinal toxicities such as anorexia, nausea, stomatitis and vomiting, as well as fatigue and alopecia. These adverse effects were well tolerated and controlled with medications. From these results we concluded oral etoposide administered for 21 consecutive days was an effective drug against cervical cancer.