PTA装置压力离心机冲洗新技术

分析了仪征化纤PTA装置压力离心机运转效果不佳的原因,提出解决方案,改造实施后取得了很好的效果。     

高层建筑物整体形变的GPS监测

利用GPS观测数据 ,进行高层建筑物的整体形变监测模型和方法的研究是一项重要的工作。本文针对高层建筑物监测环境及其对监测快速、高精度的要求 ,尝试性地提出了高层建筑物整体形变模型 ,说明了模型应用要求和特点 ,详细给出了针对该模型的GPS监测方案 ,并用实例说明了模型和方案的实施步骤 ,实例分析得出了有益结论。     

万家寨引黄工程北干线输水损失分析

万家寨引黄工程北干线系统输水损失，是关乎输水运行成本和水资源有效利用的重要问题之一。由于各类建筑物施工方法，材料及工艺的差异。其输水损失差异较大，计算方法和计算参数各不相同，文章在对各类建筑物进行输水损失计算的基础上，分析了不同类型建筑物的输水损失特点，提出了减少水量损失的建议和设想。     

1/f Noise separated from white noise with wavelet denoising

The low-frequency noise in the devices often appears to be a superposition of 1/f noise and white noise, which are induced by different physical mechanisms or microscopic defects. The separation of the two noises is necessary especially in the characterization of quality and reliability by means of noise measurement. The traditional separation method is usually used in frequency domain with limited frequency range, and the estimated value of exponent index γ for 1/f^γ noise has considerable error when the ratio of 1/f noise and white noise is smaller than 20 dB. In this paper, based on wavelet denoising theory, a new method is proposed to separate 1/f^γ noise from white noise in time domain and can be used to estimate γ values with much better accuracy even if the ratio of 1/f noise to white noise in low enough.     

改进尿素包装工艺 不断提高产品质量

通过对尿素包装工艺的不断改进，提高了尿素粒度、减少粉尘含量，效果明显。     

一种以太网兼容的综合话音/数据传输协议

本文提出一种与现有以太网兼容的综合话音/数据协议.描述了协议模型及实现方法.并用PASCAL语言在IBM-PC机上模拟研究了该协议的性能.模拟结果表明,该协议能满足话音的实时要求,性能良好,且数据传输性能没有明显下降.协议克服了以太网传输话音延迟不确定的缺点.     

Preparation of flexible polyhedral particles via concentrated emulsion templating polymerization

This paper presents recent efforts on the preparation of flexible polyhedral particles via concentrated emulsion templating polymerization in which the hydrophilic monomer (acrylamide) and hydrophobic monomer (butyl acrylate) are polymerized simultaneously in the continuous and dispersed phase, respectively. Such templating polymerization has been enhanced in our systems owing to the introduction of acrylamide monomer and their higher polymerization rate in continuous phase as compared with butyl acrylate in dispersed phase. Diffusion between the different phases was also inhibited. Furthermore, the stability of the concentrated emulsion and the molecular weight of the produced poly(butyl acrylate) were found to be significantly affected by the amount of redox initiator. The morphology of the particles could be controlled by varying the volume fraction of the dispersed phase and the polyhedral particles were achieved at higher volume fraction. Copyright © 2005 Society of Chemical Industry     

Reliability evaluation of class-E and class-a power amplifiers with nanoscaled CMOS technology

Circuit reliability of class-E and class-A power amplifiers is investigated based on a newly developed degradation subcircuit model. Measured degradation characteristics on the fabricated circuits agree well with the simulation predictions. Using this model, we have found that the class-E amplifier degrades faster than a class-A amplifier, due to a much higher stress level during switching. With a drastic decrease of PAE, a shorter lifetime is expected for a class-E amplifier.     

Protein binding study of isoflavone, perillyl alcohol and S-ibuprofen by high-performance frontal analysis

High-performance frontal analysis (HPFA) was used for a protein binding study of isoflavones (daidzein, genistin, and genistein), enantiomers of perillyl alcohol and S-ibuprofen to human serum albumin (HSA). The analyses were performed on a Develosil and Inertsil 100-Diol-5 column (10 cm×4.6mm). Sodium phosphate solution (pH 7.4, ionic strength 0.17) was used as the mobile phase at a flow rate of 1 ml/min. To ensure the drug to be eluted as a trapezoidal peak with a plateau, injection volumes were each fixed up the zonal profile with an evident plateau appears. The unbound drug concentration was determined from a plateau height of the plateau region after that experimental data were fitted by Scatchard equation. The binding constants (K) and total binding affinities (nK) of drugs to HSA were calculated, respectively.     

Protoplast from <Emphasis Type="Italic">β</Emphasis>-carotene-producing fungus <Emphasis Type="Italic">Blakeslea trispora</Emphasis>: Preparation,regeneration and validation

The effects of key parameters on the preparation and regeneration of protoplast from the β-carotene-producing fungus Blakeslea trispora were discussed in this paper, including the combination of various enzymes, mycelial age, digesting time and temperature, pH value, osmotic stabilizers, pretreatment, culture medium and culture method. Under the condition of mixed enzymes in osmotic stabilizer (0.6 M NaCl) combined with 2% lysozyme, 3% cellulase and 3% snailase, the highest protoplast yield, as high as 7.48×106 protoplasts/mL, was obtained when mycelial age was 60 h at pH 5.0–6.0 with digesting for 14–16 h at 28 °C. After purification of the obtained protoplasts, they were regenerated in PDA regenerative medium using bilayer plate culture method. To validate the usability of the protoplasts, a novel plasmid with green fluorescent protein (GFP) was used in transformation for easy visual observation. The results showed that the protoplasts prepared by the optimized method were active and applicable in further gene manipulation experiments. This work was presented at 13 ^th YABEC symposium held at Seoul, Korea, October 20–22, 2007.