Electrical properties of diphenyldiacetylene annealed under elevated pressure

A unique class of conjugated compounds composed of the derivative of condensed polycyclic aromatic compound with the phenyl group and diphenyldiacetylene oligomer was synthesized by annealing of diphenyldiacetylene under elevated pressure. The effect of annealing pressure on the conductivity of the compounds was studied. The total conductivity of the compound decreased with a decrease of frequency, approaching a constant value (dc conductivity: C_dc). The dc conductivity of the compound increased from below 10^?15 to 10 S cm^?1 with increasing annealing pressure. The dc conductivity of the oligomer was below 10^?15 S cm^?1 and that of the derivative increased from 10^?8 to 10 S cm^?1 with decreasing H/C (H/C:0.45–0.04). The conduction of the conjugated compound was electronic. The temperature coefficient of those dc conductivities was positive, with an approximately linear relation between In (C_dcT^0.5) and (1/T)^0.25, where T is the temperature. The ac conductivities C_ac were proportional to temperature and frequency f and had the following equation C_ac = Tf^S, S = 0.67–0.75. These results showed that the conduction mechanism can be explained by the hopping in a manifold of states at the Fermi level. © 1994 John Wiley & Sons, Inc.     

Role of tungsten in promoting selective reduction of NO with CO over Ir/WO3–SiO2 catalysts

Catalytic hydrogenation of naphthalene to decalin was studied over a carbon-supported rhodium catalyst in supercritical carbon dioxide solvent at 333 K, and the results were compared with those in an organic solvent. cis-, trans-Decalin and tetralin were formed from the beginning of the reaction in supercritical carbon dioxide. Higher concentration of hydrogen in carbon dioxide solvent and on the active site, and also the suppression of desorption of partially hydrogenated tetralin molecules from the active site would be responsible for higher selectivity to cis-decalin in supercritical carbon dioxide than that in an organic solvent.     

Design of High-Quality Pt–CeO2 Composite Anodes Supported by Carbon Black for Direct Methanol Fuel Cell Application

A Pt on nano-sized CeO₂ particles that in turn are supported on carbon black (CB) was synthesized using the co-impregnation method. This potential anode material for fuel cell applications was synthesized in a stepwise process. The pure CeO₂ was synthesized using an ammonium carbonate precipitation method, and the Pt particles dispersed on the CeO₂ in such a way that a uniform dispersion with the CB was obtained (Pt–CeO₂/CB). The electrochemical activity of the methanol (CH₃OH) oxidation reaction on the Pt–CeO₂/CB was investigated using cyclic voltammetry and chronoamperometry experimentation. The onset potential of CH₃OH oxidation reaction on the Pt–CeO₂/CB anode was shifted to a lower potential as compared with that on commercially available Pt–Ru/carbon (C) alloy anode. In addition, the activation energy of the Pt–CeO₂/CB anode was much lower than that of the Pt–Ru/C alloy anode. Moreover, the current density of the Pt–CeO₂/CB anode was much higher than that of the Pt–Ru/C alloy anode at temperatures between 28° and 60°C. These results suggest that the anode performance of the Pt–CeO₂/CB anode at the operating temperature of typical fuel cells (80°C) is superior to that of the more usual Pt–Ru/C alloy anode. Importantly, the rare metal, Ru, is not required in the present anode material and the amount of Pt required is also significantly reduced. As a consequence, we report a promising candidate Pt–CeO₂/CB composite anode for application in the development of direct methanol fuel cells.     

Observation of 3‐D Structure of Bubbles in a Fluidized Catalyst Bed

The interface area between the bubble and emulsion phases in a fluidized catalyst bed is one of the important parameters used to analyze and design the fluidized bed reactor. We used a fast‐scanning X‐ray CT system to observe the bubble shape and structure. We then obtained the transient 2‐dimensional cross sectional gas‐phase distribution in a fluidized catalyst bed. Using image‐processing techniques, pseudo 3‐dimensional images of the bubbles were reconstructed. The bubble structure was studied based on the 3‐dimensional images and the previously obtained results in a 2‐dimensional fluidized bed. It was found that the bubble shape was not spherical but complicated, and that the bubbles ascending in a fluidized catalyst bed consisted of some smaller bubbles.     

Development of three-electrode type micro-electrochemical reactor on anodized aluminum with photon rupture and electrochemistry

Photon rupture with a focused single pulse of pulsed YAG-laser irradiation was used to fabricate an aluminum electrochemical micro-reactor. Porous type anodic oxide film formed on aluminum specimens was irradiated in solutions with a pulsed Nd-YAG laser beam through a convex lens to fabricate micro-channels, micro-electrode, and through holes (for reference electrode, solution inlet, and outlet). During irradiation, specimens were moved by a computer controlled XYZ stage. After irradiation, the surface of the micro-channel and through hole were again treated to form anodic oxide film and the surface of the micro-electrode was treated electrochemically to provide an Au layer. The calculated volume of the micro-reactor including micro-channel and through holes is about 1.5 μl. The cyclic voltammogram of the micro-electrochemical cell was measured in K₃Fe(CN)₆/K₄Fe(CN)₆ with both static and flowing solution at different scanning rates. The anodic and cathodic peak currents were measured and the values depended on scanning rate and ion concentration when the solution was static. With the flowing solution, limiting currents were observed and the anodic limiting current was increased with the cubic root of the solution flow rate.     

Synergic effect of Pd/γ-alumina and Cu/ZSM-5 on the performance of NO x storage reduction catalyst

NO _x reduction with a combination of catalysts, Pd catalyst, NO _x storage reduction (NSR) catalyst and Cu/ZSM-5 in turn, was investigated to elucidate for the high NO _x reduction activity of this catalyst combination under oxidative atmosphere with periodic deep rich operation. The catalytic activity was evaluated using the simulated exhaust gases with periodically fluctuation between oxidative and reductive atmospheres, and it was found that the NO _x reduction activity with this catalyst combination was apparently higher than that of the solely accumulation of these individual activities, which was caused by the additional synergic effect by this combination. The Pd catalyst upstream of the NSR catalyst improved NO _x storage ability by NO₂ formation under oxidative atmosphere. The stored NO _x was reduced to NH₃ on the NSR catalyst, and the generated NH₃ was adsorbed on Cu/ZSM-5 downstream of the NSR catalyst under the reductive atmosphere, and subsequently reacted with NO _x on the Cu/ZSM-5 under the oxidative atmosphere.     

Structural Study on PbO–SiO2 Glasses by X-Ray and Neutron Diffraction and 29Si MAS NMR Measurements

Structure of x PbO–(100− x )SiO₂ ( x =25–89) glasses has been investigated by means of the X-ray and neutron diffraction and ²⁹Si MAS NMR measurements. In the radial distribution functions of all the glasses, the Pb–O correlation was observed at 0.23 nm, indicating that the PbO₃ trigonal pyramids units do exist in the whole glass forming composition range. Furthermore the existence of the first Pb–Pb correlation at ∼0.385 nm in the whole composition range suggests that the basic structural unit is considered to be a Pb₂O₄ unit, which consists of the edge-shared PbO₃ trigonal pyramids. These results strongly imply that the Pb₂O₄ units participate in the glass network constructed by SiO₄ tetrahedra even at low PbO content. Differing from other lead-containing glass systems, these structural characteristics of Pb ions in the PbO–SiO₂ glass system are responsible for the extremely wide glass-forming region.     

Dynamic Mechanical Properties and Adhesive Strengths of Emulsion Polymer by Power Feed Technique, I

Dynamic mechanical properties and adhesive strengths of power feed copolymer and random copolymer synthesized using styrene or methyl methacrylate and n-butyl acrylate were investigated. Although the two systems were synthesized from the same raw materials, power feed copolymer had a very broad transition compared with random copolymer. This fact was explained by the fact that the system synthesized through power feed method was an alloy of copolymers which are a continuous series from monomer A rich copolymers to monomer B rich copolymers. The dynamic mechanical behavior of film cast from solution was almost the same as that of emulsion film, which indicated more extensive application of power feed copolymer. In the P(nBA/St) system, power feed copolymer maintained its adhesive strengths over a wide temperature range compared with random copolymer. The absolute value, however, was not so high. This was due to the low cohesive strengths of the films.     

Novel fatty acid esters of (7E, 12E, 18R, 20Z)-variabilin from the marine sponge Ircinia felix

The methanolic extract of the marine sponge Ircinia felix has yielded nine novel fatty acid esters, (7E, 12E, 18R, 20Z)-variabilin (5Z, 9Z)-22-methyltricosadienoate, (7E, 12E, 18R, 20Z)-variabilin (5Z, 9Z)-tetracosadienoate, (7E, 12E, 18R, 20Z)-variabilin hexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 10-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 15-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 14-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 9-octadecenoate, (7E, 12E, 18R, 20Z)-variabilin octadecanoate, and (7E, 12E, 18R, 20Z)-variabilin 2,11-dimethyloctadecanoate, along with the recently described (7E, 12E, 18R, 20Z)-variabilin 11-methyloctadecanoate. The characterization of the new fatty acids (5Z, 9Z)-22-methyltricosadienoic and 2,11-dimethyloctadecanoic acids is also described. The chemical structures were determined by extensive spectroscopic, chromatographic, and chemical analyses.