Solution combustion synthesis of cerium oxide nanoparticles as corrosion inhibitor

In this study, combustion synthesis of cerium oxide nanoparticles was reported using cerium nitrate hexahydrate as starting material as well as urea, glycine, glucose, and citric acid as fuels. The influence of fuel type on structure, microstructure, band gap, and corrosion inhibition was investigated. X-ray diffraction (XRD) patterns and scanning electron microscopy micrographs showed that CeO₂ nanoparticles with different morphologies were obtained depending on the fuel type. Microstructural changes from unreacted gel to sponge-like morphologies were resulted by varying the fuel type from urea, glycine, and glucose to citric acid. In addition to Ce–O bonds, Fourier transform infrared analysis showed carbon bonds of carbonaceous compositions from incomplete combustion which were declined during combustion reaction. Furthermore, corrosion analyses showed that samples synthesized using urea fuel released the most Ce⁺⁴ ions and could have better protection than other samples.     

Studying the effect of particle size on the antibacterial activity of some N-nicotinyl phosphoric triamides

Using ultrasonic top-to-down method, nanoparticles of two N-nicotinyl phosphoric triamides: C₅H₄NC(O)NHP(O)R, R?=?4-CH₃-NC₅H₁₀ (1), (CH₃)₃CNH₂ (2) were prepared for the first time and characterized by ³¹P, ¹³C, ¹H NMR, FTIR, scanning electron microscopy, energy dispersive X-ray. The average particle size of 1 and 2 were 60–70 and 40–50?nm, respectively, and the morphology was spherical for 1 and rod for 2. Solid state (powder) antibacterial effect of these compounds and two other similar reported ones, in their macro- and nanosizes, were evaluated with colony counting method on one Gram-positive (Staphylococcus aureus) and one Gram-negative (Escherichia coli) bacteria in Brain–Heart infusion culture medium. Results showed that all the macro- and nanosized compounds, except macrosized 1, were antibacterial and all nanoscaled ones had stronger antibacterial activity than their macroscaled analogues. The most effect of the particle size was observed for 1: by decreasing the particle sizes, the antibacterial activity state of 1 was changed from inactive (for macro) to potent (for nano).     

Investigating the effect of custom‐made insoles and exercises on lower limb and back discomfort in assembly‐line workers in a rubber tire factory: A randomized controlled trial

Many occupations require standing for prolonged periods, which can be a major contributor to musculoskeletal problems and cause disturbances in different parts of the body, especially the lower back and lower extremities. The aim of this study was to investigate the effect of custom‐made insoles and exercise training on the lower limb and lower back discomfort in workers on a production line at a rubber tire factory. One hundred male workers (mean age 35.96 years, work experience of 10.62 years, standing time 6.58 hr) participated in this randomized controlled trial. The men were randomly assigned to one of four groups: (a) custom‐made insole plus lower limb exercises, (b) insoles only, (c) lower limb exercises only, and (d) no intervention. Discomfort level was recorded with a visual analog scale and a body map. The data were analyzed with analysis of covariance. The results showed a significant difference in discomfort levels between groups in the lower back (p = .001), thigh (p = .001), and knee (p = .001) areas. The combined insole and exercise group had less discomfort in the lower back, thigh, and knee. In the group that used the insole only without exercises, the discomfort level in the lower back area was reduced. The results indicate that the simultaneous use of insoles and exercises might be an effective intervention to reduce discomfort in the lower limbs and lower back in workers who remain standing for prolonged periods.     

Beneficial Effects of Silicon Application in Alleviating Salinity Stress in Halophytic Puccinellia Distans Plants

Silicon - Little is known on the impact of silicon (Si) nutrition in halophytes. Accordingly, response of Si accumulating halophyte Puccinellia distans to Si nutrition was investigated. The...     

Effects of Plant Growth Hormones on Mucor indicus Growth and Chitosan and Ethanol Production

The objective of this study was to investigate the effects of indole-3-acetic acid (IAA) and kinetin (KIN) on Mucor indicus growth, cell wall composition, and ethanol production. A semi-synthetic medium, supplemented with 0–5 mg/L hormones, was used for the cultivations (at 32 °C for 48 h). By addition of 1 mg/L of each hormone, the biomass and ethanol yields were increased and decreased, respectively. At higher levels, however, an inverse trend was observed. The glucosamine fraction of the cell wall, as a representative for chitosan, followed similar but sharper changes, compared to the biomass. The highest level was 221% higher than that obtained without hormones. The sum of glucosamine and N-acetyl glucosamine (chitin and chitosan) was noticeably enhanced in the presence of the hormones. Increase of chitosan was accompanied by a decrease in the phosphate content, with the lowest phosphate (0.01 g/g cell wall) being obtained when the chitosan was at the maximum (0.45 g/g cell wall). In conclusion, IAA and KIN significantly enhanced the M. indicus growth and chitosan production, while at the same time decreasing the ethanol yield to some extent. This study shows that plant growth hormones have a high potential for the improvement of fungal chitosan production by M. indicus.     

Coagulation performance of cationic polyelectrolyte/TiO2 nanocomposites prepared under LED irradiation

A series of acrylic-based cationic polyelectrolyte nanocomposites including water-soluble monomers acrylamide (AAm) and 2-acryloyloxyethyltrimethylammonium chloride (DAC) with different mole percent of DAC (30, 40, and 45%) in feed were produced using TiO₂ nanoparticles (0.018, 0.037, and 0.11 wt%) as photoinitiator in the aqueous solution of monomers and named as p(ADT)_1–9. The LED light at 365 nm was used for photocatalysis activation of TiO₂ nanoparticles. Structure and morphology of the synthetic polyelectrolyte were characterized by FT-IR, NMR, TGA, FESEM-EDX, and TEM. The other properties of synthetic polyelectrolyte such as molecular weight, viscosity, charge density, AAm/DAC molar ratio in copolymers, reactivity ratio values for the AAm and DAC monomers, and polymerization degree were measured. Furthermore, coagulation performance of these polyelectrolytes was investigated in soil suspension (1,000 ml, initial turbidity = 1,715 NTU). The prepared nanocomposites enhanced the coagulation of soil suspension up to 99.5% in low dosages. The best turbidity removal efficiencies (TRE) between 99.5–99.77% were achieved by p(ADT)₃ conatining 30% DAC and 0.11 wt% TiO₂. Decreasing the temperature from room temperature to 0°C led to an increase in TRE from 98 to 99.8%. Also, increasing the pH from 4 to 12 led to a decrease in TRE from 99.86 to 94%.     

Formulation and Characterization of Human Milk Fat Substitutes Made from Blends of Refined Palm Olein,and Soybean,Olive, Fish,and Virgin Coconut Oils

The simplest and the most cost-effective way of human milk fat substitute (HMFS) production is formulating of suitable vegetable oils at proper ratios. To do this, the D-optimal mixture design was used to optimize the HMFS formulation. The design included 25 formulations made from refined palm olein (35–55%), soybean oil (5–25%), olive oil (5–20%), virgin coconut oil (5–15%), and fish oil (0–10%). Samples were produced in laboratory and characterized in terms of fatty acid and triacylglycerol (TAG) compositions, free fatty acid content, peroxide value, iodine value, and oxidative stability index (OSI). HMFS samples were also compared with Codex Alimentarius (CA) and Iran National Standards Organization (INSO) standards. Each characteristic of HMFS samples was then expressed as a function of ingredient ratio using regression models. Finally, using numerical optimization, four optimized blends (PB₁-PB₄) were selected, made in the laboratory (HMFS₁-HMFS₄), characterized, and compared with CA and INSO standards. The properties of all the optimized blends (except the palmitic acid content of HMFS₂ and the monounsaturated fatty acid [MUFA] content of HMFS₃) met the standards. HMFS₄ showed the highest OSI in Rancimat and the lowest oxidation rate in Schaal oven tests. POL (19.53–21.73%), PPO (20.77–21.73%), OOO (9.11–11.16%), and OPO (8.84–9.46%) were the main (totally about 60%) TAG species found in HMFS samples. In conclusion, the HMFS₄ formula (55% palm olein, 13.5% soybean oil, 16% refined olive oil, 15% virgin coconut oil, and 0.5% fish oil) was suggested as the best formula for HMFS production.     

Biochemical and molecular characterization of novel PAH-degrading bacteria isolated from polluted soil and sludge

Polycyclic aromatic hydrocarbons (PAHs) containing more than three rings are mainly less biodegradable. Therefore, the isolation of PAHs-degrading bacteria is of great importance to be augmented for bioremediation of polluted sites with PAHs. PAHs-degrading bacteria were isolated from contaminated sites of an oil refinery. The strains were confirmed by biochemical tests and 16S rRNA, which were Stenotrophomonas maltophilia (two strains), Thermomonas koreensis (three strains), Achromobacter (two strains), Pseudomonas stutzeri (one strain), Azospirillum brasilense (one strain) and Brevibacillus brevis (one strain). The isolate strains can be applied as a bacterial consortium for purification of polluted soil with high levels of PAHs.     

Facile catalytic ring opening polymerization of lactic acid: Comparing the performance of Fe and Zn metal species

As a bio‐compatible/degradable polymer, poly(lactic acid) (PLA) has been widely noticed in tissue engineering and medical applications. Proper catalytic ring‐opening polymerization of lactic acid is pertinent to development of active metal species capable of producing high‐molecular‐weight polymers. In this work, ligand catalyst (2,4‐di‐tertio‐butyl‐6‐{[(2‐di‐methyl‐amino ethyl) methyl amino] methyl} phenol) was synthesized and then attached to Fe‐based and Zn‐based metal substitutes, and performance of metal species toward ring opening polymerization of lactic acid has been investigated. Regulation of reaction condition at 180°C for 36 h with Zn‐based catalyst allowed for late‐stage production of a high‐molecular‐weight PLA, while Fe‐based facilitated polymerization at early stages leading to PLAs with comparatively twofold higher molecular weight at lower time, monomer‐to‐initiator ratio, and temperature (at 170°C). A ratio of monomer to initiator of 5000 with Fe catalyst resulted in the highest molecular weight. Thus, polymerization has been facilitated by the use of Fe‐based catalyst. For this class of catalyst with Fe substitute, the product was characterized by means of ¹H‐NMR, Fourier transform infrared spectroscopy, and differential scanning calorimetry analyses. J. VINYL ADDIT. TECHNOL., 25:215–224, 2019. © 2018 Society of Plastics Engineers