电容器介质吸收电流的测量和表征

在外电场作用下，电容器介质的吸收电流和漏电电流混杂而难以分开，但外电场除去后吸收电流对电容器放电总电荷所贡献的百分比具有确定值，吸收电流的释放遵从自由弛豫规律。可用响应时间ｒ’表征。实验给出了一些常见介质的吸收电流表征参数。     

不适定热传导反问题的两种求解方法及其比较

本文以不适定热传导反问题为对象，采用两种方法进行了求解。一种方法基于对具有测量误差的边界条件进行适当的微扰，使之化为适定问题；另一种方法基于Ｔｉｋｈｏｎｏｖ的正则平滑思想，对反问题中的输入数据进行平滑处理，以便使函数及其一阶导数均实现一致逼近。通过计算与求解表明，两种方法均能得到具有一定精度与稳定性的结果，其中以正则化法更为理想     

Protein kinase C activity in the hippocampus following spatial learning tasks in mice

We have tested the effect of several bile acids on the proliferation and differentiation of the HL60 human promyelocytic leukemia cell line in vitro. Deoxycholate, chenodeoxycholate and lithocholic acid caused dose-dependent inhibition of cell proliferation and induction of differentiation along the monocyte/macrophage pathway as determined by morphology, NBT test, non-specific esterase, and staining by monoclonal antibodies against specific cell-surface antigens. Optimal effects were obtained at 100, 75, and 60 microM of the 3 bile acids respectively. Cell-cycle flow-cytometric analysis showed that a substantial fraction of HL60 cells accumulated at the G0/G1 transition. Protein-kinase-C inhibitors such as sphinganine and H-7 inhibited the differentiation-inducing effect of bile acids, suggesting a possible role for PKC in this regulation. When bile acids were combined with non-effective concentrations of all-trans retinoic acid, enhancement of the monocytic differentiation of THP-1 human leukemia cells was observed. Our findings demonstrate induction of tumor-cell differentiation by bile acids, compounds that present minimal undesirable effects in humans.     

制备轻油蒸汽转化制氢镍催化剂新的共浸法

用一种新的共浸法制备一批轻油蒸汽转化催化剂样品。运用TG、DTG、DSC和XRD进行的研究发现,与一般共浸法相比,这种着重提高组份间相互作用的新制法有利于提高镍催化剂的活性、抗积炭性、稳定性和金属镍的分散度,并发现用新法制备的催化剂样品,在水热初期约30小时的过程中,出现了镍晶粒先聚集再分散的新现象。     

MEASUREMENT OF COEFFICIENTS FOB SIMULTANEOUS HEAT AND MASS TRANSFER IN FOOD PRODUCTS

Two experimental devices were designed and built to determine four coefficients K_T K_M D_M D (or δ_T = D_T / D_M occurring in simultaneous heat and mass transfer equations, where,K _T and D_M are thermal conductivity and moisture diffcusivity respectively, D_T ( or δ _T is temperature gradient Induced moisture migration coefficient and K_M is moisture gradient Induced heat transfer coefficient. Three food materials, i.e. potato, bread dough and bread, were tested. From this study, it was found that the value of 5 was higher for low density food materials, such as bread, than for high density materials, such as potato. The coefficient & measures moisture migration contribution due to temperature gradient within the material. The average values of δ _T for potato, bread dough and bread were 0.0014, 0.0059 and 0.0127 per °C, respectively. The contribution of temperature gradient to the overall moisture migration is negligible In high density materials. However, this contribution may be important in the moisture migratlon analysls for low density materials. The moisture gradient induced heat transfer coefficient % as found to be negligible for the materials tested in this study     

多变量模糊优化信息可视化研究

本文针对复杂工程系统的多变量模糊优化问题进行了可视化方法研究，提出了模糊子域的绘制与运算算法，并在此基础上，对多变量模糊优化问题进行了数学分析，直观显示出了模糊可行域在设计空间上的分布规律．     

超短脉冲光电导开关的全波分析

本文采用时域有限差分法直接求解包含传导电流的三维麦克斯韦方程组,对超短脉冲光电导开关进行全波分析,分析中考虑了静电场影响,采用了比较精确的光电导数学模型。本文还讨论了开关输出信号的模式组成和激光脉冲能量、脉宽对开关性能的影响,并给出了光电导开关响应在不同时刻的三维图形。     

Compressive and tribological properties of Al2O3 fibre and hexagonal BN particle hybrid reinforced Al-Si alloys

Al₂O₃ fibre-hexagonal BN particle hybrid reinforced aluminium-silicon alloys were fabricated by centrifugal force infiltration route. Hardness test and ultimate compressive test results are reported. The wear and friction properties of hybrid MMCs was investigated by means of a block-on-ring (bearing steel) type wear rig in a dry sliding condition. It is shown that the hardness and ultimate compressive strength of hybrid MMCs was evidently decreased with the addition of hexagonal BN particles, however, the wear rate and coefficient of friction of hybrid MMCs was improved simultaneously with increase of BN particle volume fraction, especially for the higher applied loads in the test.