Characterization of protective coatings for planar automotive gas sensors

Alumina support material suitable for use as a planar automotive gas sensor support was coated in thin films of yttria-stabilised zirconia (YSZ) and titania. The morphology, composition, thickness and homogeneity of the coating was measured. The coating was applied to the ‘green’ form of a tape cast alumina substrate which was subsequently fired at 1500 °C to produce the final form of the coated alumina. The YSZ coating gave a continuous 5 μm thick coating with no evidence of mixed oxide formation between the YSZ and the alumina substrate. XRD indicated a face centred cubic Y doped ZrO₂ or primitive tetragonal Zr_0.9Y_0.1O_1.95 phase. The titania coatings were much thinner (<1 μm) with signs of trace amounts of aluminium titanium oxide (Al₂TiO₅) as well as rutile titania in XRD. Spot analysis using X-ray photoelectron spectroscopy showed a fairly regular titania coverage. Atomic force microscopy analysis showed a particle size of 1–3 μm for the YSZ coating and 0.5 μm for titania.     

Acyltransferase activities in the yolk sac membrane of the chick embryo

The activities of some enzymes of glycerolipid synthesis and fatty acid oxidation were measured in subcellular fractions of the yolk sac membrane (YSM), an extra-embryonic tissue that mediates the transfer of lipid from the yolk to the circulation of the chick embryo. The activities of monoacylglycerol acyltransferase and carnitine palmitoyl transferase-1 in the YSM (respectively, 284.8±13.2 nmol/min/mg microsomal protein and 145.6±9.1 nmol/min/mg mitochondrial protein; mean ±SE; n=4) at day 12 of development appear to be the highest yet reported for any animal tissue. Also, the carnitine palmitoyl transferase-1 of the YSM was very insensitive to inhibition by malonyl CoA. The maximal activities of glycerol-3-phosphate acyltransferase and diacylglycerol acyltransferase in the YSM (respectively, 26.7±2.2 and 36.1±2.1 nmol/min/mg microsomal protein) were also high compared with the reported values for various animal tissues. The very high enzymic capacity for glycerolipid synthesis supports the hypothesis that the yolk-derived lipids are subjected to hydrolysis followed by reesterification during transit across the YSM. The monoacylglycerol pathway appears to be the main route for glycerolipid resynthesis in the YSM. The results also suggest that the YSM has the capacity to perform simultaneously β-oxidation at a high rate in order to provide energy for the lipid transfer process.     

The microwave characterization of single crystal lithium and calcium fluoride at cryogenic temperatures

The whispering-gallery mode method is used for very accurate permittivity and dielectric loss measurements of single crystal lithium fluoride (LiF) and calcium fluoride (CaF2) over the temperature range of 4.5 K to 300 K. The absolute uncertainty in the real part of permittivity was estimated to be less than 0.1%, and it was limited principally by uncertainty in dimensions of the samples. Dielectric losses were measured with uncertainties of about 10% limited by the accuracy of Q-factor measurements. The measured materials exhibited dielectric losses between 2-4 x 10(-7) near 5 K. The relative permittivity was evaluated as 6.502 (4.9 K) to 6.844 (296 K) at 17.5 GHz for CaF2 and 8.534 (4.6 K) to 9.063 (300 K) at 13.5 GHz for LiF.     

Cardiovascular and thermal consequences of protective clothing: a comparison of clothed and unclothed states

We have undertaken a laboratory-based examination of the cardiovascular and thermal impact of wearing thermal (heat) protective clothing during fatiguing exercise in the heat. Seven males completed semi-recumbent, intermittent cycling (39.6 degrees C, 45% relative humidity) wearing either protective clothing or shorts (control). Mean core and skin temperatures, cardiac frequency (f(c)), stroke volume (Q), cardiac output (Q), arterial pressure, forearm blood flow (Q(f)), plasma volume change, and sweat rates were measured. In the clothed trials, subjects experienced significantly shorter times to fatigue (52.5 vs. 58.9 min), at lower peak work rates (204.3 vs. 277.4 W), and with higher core (37.9 degrees vs. 37.5 degrees C) and mean skin temperatures (37.3 degrees vs. 36.9 degrees C). There was a significant interaction between time and clothing on f(c), such that, over time, the clothing effect became more powerful. Clothing had a significant main affect on Q, but not Q, indicating the higher Q was chronotropically driven. Despite a greater sweat loss when clothed (923.0 vs. 547.1 g.m(-2) x h(-1); P<0.05), Q(f) and plasma volume change remained equivalent. Protective clothing reduced exercise tolerance, but did not affect overall cardiovascular function, at the point of volitional fatigue. It was concluded that, during moderately heavy, semi-recumbent exercise under hot, dry conditions, the strain on the unclothed body was already high, such that the additional stress imparted by the clothing ensemble represented a negligible, further impact upon cardiovascular stability.     

Comparative evaluation of chloroethene dechlorination to ethene by Dehalococcoides-like microorganisms

Reductive dehalogenation of tetrachloroethene (PCE), trichloroethene (TCE), cis-1,2-dichloroethene (DCE), and vinyl chloride (VC) was examined in four cultures containing Dehalococcoides-like microorganisms. Dechlorination and growth kinetics were compared using a Monod growth-rate model for multiple electron acceptor usage with competition. Included were the Victoria mixed culture containing Dehalococcoides species strain VS (from Victoria, TX), the mixed culture KB-1/VC (from southern Ontario), the Pinellas mixed culture (from Pinellas, FL), and D. ethenogenes strain 195. All cultures, with the exception of D. ethenogenes strain 195, grew with VC as catabolic electron acceptor. A dilution method was developed that allows a valid comparison to be made of dehalogenating kinetics between different mixed cultures. Using this procedure, maximum growth rates on VC were found to be similar for strain VS and KB-1/VC (0.42-0.49 +/- 0.02 d(-1)) but slower for the Pinellas culture (0.28 +/- 0.01 d(-1)). The 16S rRNA gene sequences were determined to ensure that no cross contamination between cultures had occurred. Following enrichment of the VC dechlorinating microorganisms on VC, the cultures were amended with DCE, TCE, or PCE. The three mixed cultures failed to dechlorinate PCE or did so very slowly. However, the dilution technique indicated that all experienced growth on TCE and DCE as well as on VC. Maximum growth rates on DCE alone were quite similar (0.43-0.46 d(-1)), while the Pinellas culture grew faster on TCE alone (0.49 d(-1)) than did the other two mixed cultures (0.33-0.35 d(-1)). Half-velocity and inhibition constants for growth on TCE were also determined for the three mixed cultures; both constants were found to be essentially equal and the same for the different cultures, varying between only 8.6 and 10.5 microM. The ability of the strain VS, KB-1/VC, and Pinellas cultures to utilize TCE rapidly with conversion to ethene is quite different from that of any other reported microorganism. It was separately confirmed with more traditional cell-counting techniques that strain VS coupled TCE, as well as DCE and VC, utilization with growth. This is the first report of an organism obtaining energy for growth through every step in the reduction of TCE to ethene. Also, as suggested by the dilution technique, the dehalogenating organisms in the KB-1/VC and Pinellas cultures appear to obtain growth from TCE utilization as well. Such ability to grow while dehalogenating TCE to ethene will be an important advantage for their use in bioaugmentation.     

A hierarchical modeling approach for estimating national distributions of chemicals in public drinking water systems

Water quality studies often include the analytical challenge of incorporating censored data and quantifying error of estimation. Many analytical methods exist for estimating distribution parameters when censored data are present. This paper presents a Bayesian-based hierarchical model for estimating the national distribution of the mean concentrations of chemicals occurring in U.S. public drinking water systems using fluoride and thallium as examples. The data used are Safe Drinking Water Act compliance monitoring data (with a significant proportion of left-censored data). The model, which assumes log-normality, was evaluated using simulated data sets generated from a series of Weibull distributions to illustrate the robustness of the model. The hierarchical model is easily implemented using the Markov chain Monte Carlo simulation method. In addition, the Bayesian method is able to quantify the uncertainty in the estimated cumulative density function. The estimated fluoride and thallium national distributions are presented. Results from this study can be used to develop prior distributions for future U.S. drinking water regulatory studies of contaminant occurrence.     

Some observations on multigrid convergence for convection–diffusion equations

This paper is concerned with the convergence behaviour of multigrid methods for two- dimensional discrete convection-diffusion equations. In Elman and Ramage (BIT 46:283–299, 2006), we showed that for constant coefficient problems with grid-aligned flow and semiperiodic boundary conditions, the two-grid iteration matrix can be reduced via a set of orthogonal transformations to a matrix containing individual 4 × 4 blocks, enabling a trivial computation of the norm of the iteration matrix. Here we use a similar Fourier analysis technique to investigate the individual contributions from the smoothing and approximation property matrices which form the basis of many standard multigrid analyses. As well as the theoretical results in the semiperiodic case, we present numerical results for a corresponding Dirichlet problem and examine the correlation between the two cases.     

Collision cascades in pure <Emphasis Type="Italic">δ</Emphasis>-plutonium

Molecular dynamics simulations of the formation and annealing of large collision cascades in delta-phase plutonium are presented. The defect evolution is followed with time up to 2 ns. Simulations are performed with the MEAM potential at three different temperatures; at 600 K where the pure delta phase is thermodynamically stable; at 300 K where the delta phase can only be maintained in a metastable state with minor additions of gallium or aluminum; and at 180 K where plutonium should transform to the alpha phase. It is found in all three cases that the atomic structure within the cascade evolves through a glass-like state. At 600 K, this structure recovers very slowly; at 300 K it persist up to 2 ns with no discernable trend to recover eventually; and at 180 K the amorphous structure initiated by the collision cascade spreads through the entire crystal and converts it to a glass-like structure.     

浪涌抑制器保护电子产品免受高压瞬态影响

在汽车和工业应用中，常常遇到持续时间从几微秒到几百毫秒的高压电源尖峰。这些系统中的电子产品不仅必须耐受瞬态电压尖峰而不被损坏，而且在很多情况下还必须在出现电压尖峰时自始至终保证可靠工作。在电源通过长导线分配的系统中，负载步进（即负载电流突然变化）会引起严重的瞬态。尤其引人注意的是负的负载步进，这时负载电流从较大值降低为较小值。负的dl／dt引起导线寄生电感，产生正向高压尖峰，这可能造成由同一条导线供电的周围器件的损坏.