Role of nanometer roughness on the adhesion and friction of a rough polymer surface and a molecularly smooth mica surface

Friction and adhesion measurements between surfaces of cross-linked, stiff polymers of varying roughness against smooth, bare mica surfaces were carried out in dry air as well as in the presence of lubricating oil. The nominal (macroscopic) contact area varies with the applied load according to the Johnson, Kendall and Roberts (JKR) theory, yet shows significant hysteresis due to the irreversibility arising from the loading/unloading curves of multiple asperities. Upon introducing the oil between the surfaces, the critical shear stress is reduced to zero due to the elimination of the adhesion force. However, the effect is less noticeable on the friction coefficient. Lastly, the effect of increasing the (RMS) roughness was greatest over the first few nanometers due to the diminution of the adhesion-controlled contribution to the friction, after which a further increase in roughness had less dramatic effects. A model is presented to account for the observed adhesion hysteresis during repeated loading/unloading cycles of purely elastically deforming rough surfaces. Bruno Zappone and Kenneth J. Rosenberg made equal contributions.     

Carbazole based hole transporting materials for solid state dye sensitizer solar cells: role of the methoxy groups

The synthesis of new organic hole transporting materials (HTMs) based on 3,6‐disubstituted 9H‐carbazole‐3,6‐diamine,N,N,N′,N′‐tetraphenyl‐9‐(4‐methoxyphenyl) derivatives and their applications in solid state dye sensitizer solar cells (DSSCs) are described. The effect of the methoxy group localized on the para position of the diphenylamine moieties on the thermal, electronic and electrochemical properties and photovoltaic performance is discussed. In solid state DSSCs, utilization of the aforementioned HTMs in combination with the dye D102 (TiO₂/D102/HTM/Au) shows a positive influence of the methoxy group on the photovoltaic conversion efficiency compared with unsubstituted diphenylamine grafted groups. A study on the concentration of the HTM is also carried out and shows an optimal concentration around 200 mg mL^?1. Without further optimization, the best device gives a power conversion efficiency of 1.75% under AM 1.5 solar irradiation (100 mW cm^?2).     

Digital canvas removal in paintings

The periodic structure of the underlying support of paintings on canvas can become quite prominent and disturbing in high resolution digital recordings. In this paper, we construct a new model and method for the digital removal of canvas which is considered as a noise component superimposed on the painting artwork. The high resolution of the images prohibits the efficient application of existing adaptive denoising filters. Hence, a two-step approach is proposed. First a (smoothing) Wiener filter is applied to the complete image. The second step consists of a spatially adaptive extension with low-complexity to obtain a generic digital canvas removal filter.     

Prediction of Acid Mine Drainage: Importance of Mineralogy and the Test Protocols for Static and Kinetic Tests

Static tests, which compare the acid-generating potential and acid-neutralizing potential for a given mine waste (tailings or waste rocks), are characterized by a wide uncertainty zone in which it is impossible to accurately predict the acid-generating potential (AGP). Then, to better assess long-term AGP, kinetic tests are usually performed to provide more information about the reaction rates of the acid-generating and acid-neutralizing minerals. The present work compares the classic Sobek static test with three mineralogical static tests to assess the importance of sample mineralogy in acid mine drainage (AMD) prediction. We also investigated how experimental procedures related to static tests can influence prediction results. We used three synthetic tailings samples made by mixing well-characterized pure minerals in calibrated proportions. Although basically different in their principles and procedures, the modified Sobek and mineralogical static tests gave similar results. These AGP predictions were then validated by the use of a kinetic test. The kinetic test protocol was also modified in this study and the results obtained correlated well with the static test results, in contrast to the standard kinetic test protocol. The present work highlights the limitations of static and kinetic test procedures, and provides recommendations for a better use of these tests for more reliable AMD prediction.     

Variation in carotenoid–protein interaction in bird feathers produces novel plumage coloration

Light absorption by carotenoids is known to vary substantially with the shape or conformation of the pigment molecule induced by the molecular environment, but the role of interactions between carotenoid pigments and the proteins to which they are bound, and the resulting impact on organismal coloration, remain unclear. Here, we present a spectroscopic investigation of feathers from the brilliant red scarlet ibis (Eudocimus ruber, Threskiornithidae), the orange-red summer tanager (Piranga rubra, Cardinalidae) and the violet-purple feathers of the white-browed purpletuft (Iodopleura isabellae, Tityridae). Despite their striking differences in colour, all three of these feathers contain canthaxanthin (β,β-carotene-4,4′-dione) as their primary pigment. Reflectance and resonance Raman (rR) spectroscopy were used to investigate the induced molecular structural changes and carotenoid–protein interactions responsible for the different coloration in these plumage samples. The results demonstrate a significant variation between species in the peak frequency of the strong ethylenic vibration (ν₁) peak in the rR spectra, the most significant of which is found in I. isabellae feathers and is correlated with a red-shift in canthaxanthin absorption that results in violet reflectance. Neither polarizability of the protein environment nor planarization of the molecule upon binding can entirely account for the full extent of the colour shift. Therefore, we suggest that head-to-tail molecular alignment (i.e. J-aggregation) of the protein-bound carotenoid molecules is an additional factor.     

Effect of muscle,ageing time and modified atmosphere packaging conditions on the colour,oxidative and microbiological stability of packed beef

The objective of this study was to evaluate the influence of two different vacuum ageing times (7 and 14 days) and the impact of the modified atmosphere packaging (MAP) configuration (gas/product ratios: 0.5 and 1 and gas composition: 70% O₂ + 30% CO₂ and 40% O₂ + 30% CO₂ + 30% N₂) on the quality of fresh beef during subsequent storage at 4 °C. For this purpose, three separate experiments were performed. For each experiment, two different muscles (Longissimus dorsi and Biceps femoris) were sampled from four double‐muscled Belgian Blue beef carcasses. Next to colour, also the evolution in microbial load, pH, O₂ and CO₂ in the headspace and lipid oxidation at the meat surface were evaluated. A vacuum ageing for 14 days compared with 7 days resulted in a higher initial microbial load on the day of MAP packaging, which resulted finally in a significantly shorter shelf life. This ageing effect was less pronounced on the colour stability and lipid oxidation of the meat samples. No significant influence of the packaging configuration on any of the analysed parameters (colour, microbial load, pH and lipid oxidation at the meat surface) was observed.     

Modification of coconut fibers with polyaniline for manufacture of pressure‐sensitive devices

This article studies the modification of coconut fibers with polyaniline (PAni) with help of statistical experimental design techniques. The main factors studied here were the techniques used for particle dispersion (sonication vs. magnetic stirring) and the type of initiator (ammonium persulfate, APS, vs. ammonium cerium sulfate dihydrate, Ce(IV)). The obtained materials were characterized through low field nuclear magnetic resonance, small‐and wide‐angle X‐ray scattering, scanning electron microscopy, fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy. Additionally, the electrical resistivities and respective sensitivities to variations of the applied pressure were evaluated for all obtained samples, with help of standard volume resistivity measurements and electro‐mechanical tests. The materials prepared through magnetic stirring with APS presented the best electrical and electromechanical properties, although materials prepared through sonication with Ce(IV) also presented good electrical and electromechanical properties and could be prepared much faster. As a consequence, modification of coconut fibers with PAni, using sonication as the particle dispersion technique and Ce(IV) as initiator, constitutes a very promising procedure for manufacture of pressure‐sensitive devices. POLYM. ENG. SCI., 54:2887–2895, 2014. © 2014 Society of Plastics Engineers