Phenomena-based thermal-hydraulic modeling requirements for systems analysis of a Modular High Temperature Gas-Cooled Reactor

The Modular High Temperature Gas-Cooled Reactor (MHTGR) is a candidate design for new production and commercial power nuclear reactors. The MHTGR has inherent safety features including: (1) passive shutdown and decay heat removal, (2) reduced requirements for operator intervention, thereby reducing sensitivity to operator error, and (3) long time intervals for corrective action. In support of the Department of Energy's (DOE) initial development of the design, the authors have completed an evaluation of the thermal-hydraulic phenomena that will dominate the plant response during representative normal, off-normal and accident conditions. Phenomena having significance to the plant behavior have been identified, and ranked with respect to their relative importance in satisfying operational, investment and/or safety criteria. The resulting information provides the basis for evaluating the applicability of existing computer codes, and defines the requirements for the development of new codes, for thermal-hydraulic systems analysis. The phenomena-based requirements also support the quality assurance related verification and validation of these codes. This paper briefly describes the methodology employed, and gives illustrative examples of the resulting requirements. References are cited for reports that document the full body of requirements and provide additional information for the methodology.     

Analysis of an antijam FH acquisition scheme

An easily implemented matched filter scheme for acquiring hopping code synchronization of incoming frequency-hopping (FH) signals is analyzed, and its performance is evaluated for two types of jamming: partial-band noise jamming and partial-band multitone jamming. The system is designed to reduce jammer-induced false alarms. The system's matched filter output is compared to an adaptive threshold that is derived from a measurement of the number of acquisition channels being jammed. Example performance calculations are given for the frequency coverage of the jamming either fixed over the entire acquisition period or hopped, that is, changed for each acquisition pulse. It is shown that the jammer's optimum strategy (the worst case) is to maximize the false alarm probability without regard for the effect on detection probability, for both partial-band noise and multitone jamming. It is also shown that a significantly lower probability of false acquisition results from using an adaptive matched filter threshold, demonstrating that the strategy studied here is superior to conventional nonadaptive threshold schemes     

Spontaneous platelet activation and aggregation during obstructive sleep apnea and its response to therapy with nasal continuous positive airway pressure. A preliminary investigation

STUDY OBJECTIVE: To determine whether alterations of platelet reactivity occur during obstructive sleep apnea (OSA) and, if so, whether therapy with nasal-continuous positive airway pressure (N-CPAP) alters this reactivity. DESIGN: Patients with suspected moderate to severe OSA had blood drawn for spontaneous platelet aggregation (sAGG) and activation (sACT) measurements at hourly intervals during diagnostic polysomnography (PSG) and, in those with confirmed OSA, on a separate night during which N-CPAP was applied. SETTING: Tertiary care center sleep laboratory. PATIENTS: Six patients with OSA had matched blood samples drawn on both diagnostic and N-CPAP treatment nights. Five patients without confirmed OSA served as controls. INTERVENTIONS: N-CPAP was applied to those patients with OSA and pressures adjusted with goals of eliminating apneas; N-CPAP was then maintained through the night. MEASUREMENTS AND RESULTS: sACT and sAGG were measured using flow cytometric determination of P-selectin expression using a monoclonal antibody. Platelet aggregation was assessed by measuring the proportion of platelets larger than resting platelets by light scatter techniques. Mean values for sACT and sAGG were higher on the diagnostic night compared with treatment night (p = 0.001 and p = 0.003, analysis of variance, respectively). The mean baseline supine sACT compared with completion supine sACT for both diagnostic and N-CPAP nights also revealed significant differences (mean = 16.6 +/- 3.5% vs 36.9 +/- 7.5%, p = 0.04; and 11.9 +/- 3% vs 39.5 +/- 9.1%, p = 0.04). Platelet activation during sleep in five subjects without OSA resembles that found in patients with OSA during N-CPAP. CONCLUSIONS: Increased platelet sACT and sAGG occur during sleep in patients with OSA. This effect is greatly reduced by N-CPAP.     

Response of dairy cows to high doses of a sustained-release bovine somatotropin administered during two lactations. 2. Health and reproduction.

Eighty-two lactating Holstein cows in their first, second, or third lactation received either one, three, or five concurrent i.m. injections of a unit dose (.6 g) of zinc methionyl bST (sometribove) or five doses of the vehicle. Injections were given at 14-d intervals from 60 +/- 3 d postpartum until the end of lactation or necropsy. Thirty-eight animals were continued on treatment for a 2nd yr. Sometribove did not affect the incidence of ketosis, milk fever, tetany, or pneumonia. Digestive disorders, primarily cows going off feed, were increased by bST during yr 1 only. The incidence of lameness was increased by bST in some time frames because of an increase in the 3.0-g bST group. Lameness was not associated with treatment-specific histopathologic changes or with abnormalities in cartilage or bone. Reproductive health generally was unaffected by treatment, but delayed conception and increased incidence of abortion were noted. Incidence of cystic ovaries was unaffected by bST. Pregnancy rates were decreased during the 100-d breeding interval of yr 1 but not during the 215-d interval of yr 2. The incidence of clinical mastitis was increased by bST, primarily at the 3.0-g dose. During the 2-yr study, 0, 3, 3, and 2 cows died or became moribund on 0, .6, 1.8, and 3.0 g of bST, respectively. Health issues identified for further evaluation included lameness and clinical mastitis for the 3.0-g group and early removal from the herd and decreased reproductive performance for all bST groups. Bovine somatotropin caused no treatment-specific toxic effects in dairy cows even at 3.0 g every 14 d.     

Self-aligning planarization and passivation for integration applications in III-V semiconductor devices

This work reports an easy planarization and passivation approach for the integration of III-V semiconductor devices. Vertically etched III-V semiconductor devices typically require sidewall passivation to suppress leakage currents and planarization of the passivation material for metal interconnection and device integration. It is, however, challenging to planarize all devices at once. This technique offers wafer-scale passivation and planarization that is automatically leveled to the device top in the 1-3-/spl mu/m vicinity surrounding each device. In this method, a dielectric hard mask is used to define the device area. An undercut structure is intentionally created below the hard mask, which is retained during the subsequent polymer spinning and anisotropic polymer etch back. The spin-on polymer that fills in the undercut seals the sidewalls for all the devices across the wafer. After the polymer etch back, the dielectric mask is removed leaving the polymer surrounding each device level with its device top to atomic scale flatness. This integration method is robust and is insensitive to spin-on polymer thickness, polymer etch nonuniformity, and device height difference. It prevents the polymer under the hard mask from etch-induced damage and creates a polymer-free device surface for metallization upon removal of the dielectric mask. We applied this integration technique in fabricating an InP-based photonic switch that consists of a mesa photodiode and a quantum-well waveguide modulator using benzocyclobutene (BCB) polymer. We demonstrated functional integrated photonic switches with high process yield of >90%, high breakdown voltage of >25 V, and low ohmic contact resistance of /spl sim/10 /spl Omega/. To the best of our knowledge, such an integration of a surface-normal photodiode and a lumped electroabsorption modulator with the use of BCB is the first to be implemented on a single substrate.     

Citizen Preferences and Paying for Police

Abstract: Researchers frequently approach questions dealing with local fiscal decision‐making using economic models. These models typically base the demand for public services on a set of socioeconomic characteristics that serve as rough proxies for voter preferences. Our study focuses more directly on preference formation and explores the nature of the relationship between citizens’ attitudes about police services and their willingness to pay for them. We pay particular attention to the role of demographic traits, television media, and direct contact with service providers. We present data from a survey of Connecticut adults and use these data to test direct and indirect effects models with regression analysis. We find evidence that attitudes about police predict willingness to pay for police services, holding the demographic attributes of respondents constant. We also find that the effects of some demographic traits on demand for services are mediated by preferences, as are some types of experience and media exposure.