Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.     

Impedance, attenuation and power-handling characteristics of doubleL-septa waveguides

Rectangular waveguides with two L-shaped septa attached to the broad walls in antipodal configuration have been shown theoretically by the authors (see ibid. vol.40, no.4, p.777-781, 1992) to be an improved variant of the double T-septa guide having larger cut-off wavelength and broader bandwidth of the dominant TE mode. Numerical data on the attenuation, impedance, and power handling capability of this new type of broadband guide are presented as additional design information     

Dynamics Modelling of Hexaslides using the Decoupled Natural Orthogonal Complement Matrices

In this paper, dynamic model of a class of parallel systems, namely, the hexaslides, is proposed. The model developed is based on the concept the decoupled natural orthogonal complement (DeNOC) matrices, introduced elsewhere. The dynamic model of hexslides, though complex due to the existence of multi-loop kinematic chains, is required for actuator power estimation, computed-torque control, optimum tool trajectory generation, etc. The use of DeNOC offers many physical interpretations, recursive algorithms, and parallel computations. Using the proposed dynamic model, a parallel inverse dynamics algorithm has been presented to compute the actuator forces. This is useful to choose suitable motors for an application. An illustration is provided using an existing machine tool based on hexaslides, namely, the HexaM, while it is carrying out a circular contouring. Secondly, the effect of leg and slider inertias is also studied, which clearly suggests that neither of these can be neglected while finding the actuator forces.     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

Photostability of polyetherurethaneureas

Polyetherurethaneureas (PEUUs) were synthesised from polyethylene-glycols (PEGs) of molecular weight 400, 600 and 1000, 4,4′-diphenylmethanediisocyanate (MDI) and aliphatic diamine chain extenders, 1,3-propanediamine (PDA) and 1,6-hexanediamine (HDA). Polymer films were irradiated with 365 nm light at 293 K and the effects of polyether soft segment length and urea hard segment on photo-oxidative stability were studied by following the variation in weight-average molecular weight (M _w), gel formation and stress-strain properties. Changes in ultraviolet and infrared spectroscopy were monitored on photo-oxidation and hydroperoxide content determined. The soft segment length was increased by increasing the molecular weight of PEG from 400 to 1000 and hard segment structure was changed by variation of diamine. It was noted that the structure of urea and polyether soft segment length plays an important role in photostability of PEUUs. PDA chain extended PEUUs were more stable than HDA chain extended PEUUs.