Evaluation of tritium diffusion through the Neutral Beam Injector calorimeter panel

The Neutral Beam Test Facility (NBTF) to be realized in Padoa will test the Neutral Beam Injection (NBI), one of the Heating and Current Drive Systems foreseen for ITER. The NBI is based on the acceleration of hydrogen or deuterium negative ions up to 1 MeV. This work has been aimed at assessing the tritium release from the NBTF in order to provide data for the safety analysis. In particular, the diffusion of the tritium through the neutral beam target material (the CuCrZr alloy calorimeter panels) has been assessed by using literature data of the diffusion coefficient. The tritium generated inside the calorimeter panels moves into both the vacuum and water side: the tritium diffusion flux has been evaluated during the beam-on (200 °C) and the beam-off (20 °C) phases of the NBTF experiments consisting of an interim campaign and a final test. The penetration depth of the tritium through the 2 mm thick CuCrZr alloy material has been also evaluated by using a Monte-Carlo code. As main result, the assessed diffusion flux of tritium during both the beam-on and the beam-off phases are modest. In fact, at the end of the interim campaign (100 days), about the 96% of the all generated tritium (626.5 MBq) exits the calorimeter while the residual tritium inventory (25 MBq) leaves the copper alloy with a diffusion time of about 1 month. At the end of the final test (14 days) about the 99% of the total generated tritium (1.023 × 10⁴ MBq) leaves the copper alloy and the remaining tritium inventory (152.2 MBq) is released by about 32 days. In both the interim campaign and the final test, more than the 99% of the total tritium is transferred into the vacuum side of the calorimeter panel while negligible tritium amounts enter the cooling water system thus showing a very low impact on the environment.     

Linux real-time framework for fusion devices

A new framework for the development and execution of real-time codes is currently being developed and commissioned at JET. The foundations of the system are Linux, the Real Time Application Interface (RTAI) and a wise exploitation of the new i386 multi-core processors technology.The driving motivation was the need to find a real-time operating system for the i386 platform able to satisfy JET Vertical Stabilisation Enhancement project requirements: 50 μs cycle time. Even if the initial choice was the VxWorks operating system, it was decided to explore an open source alternative, mostly because of the costs involved in the commercial product.The work started with the definition of a precise set of requirements and milestones to achieve: Linux distribution and kernel versions to be used for the real-time operating system; complete characterization of the Linux/RTAI real-time capabilities; exploitation of the multi-core technology; implementation of all the required and missing features; commissioning of the system.Latency and jitter measurements were compared for Linux and RTAI in both user and kernel-space. The best results were attained using the RTAI kernel solution where the time to reschedule a real-time task after an external interrupt is of 2.35 ± 0.35 μs. In order to run the real-time codes in the kernel-space, a solution to provide user-space functionalities to the kernel modules had to be designed. This novel work provided the most common functions from the standard C library and transparent interaction with files and sockets to the kernel real-time modules. Kernel C++ support was also tested, further developed and integrated in the framework.The work has produced very convincing results so far: complete isolation of the processors assigned to real-time from the Linux non real-time activities, high level of stability over several days of benchmarking operations and values well below 3 μs for task rescheduling after external interrupt. From being the alternative option, RTAI has been finally chosen as the platform for the project. A first stable version of the framework has been integrated on the JET system and is already being commissioned. It will be soon be used on the Vertical Stabilisation Enhancement for the Plasma Control Upgrade (PCU) project at JET.     

Synthesis of Indole Derivatives from 2-Alkynylanilines by Means of Gold Catalysis

The peculiar features of gold(III) and gold(I) species include exceptional carbophilicity and, at the same time, lone pair affinity. Such a combination offers many advantages for the development of more sustainable approaches to the synthesis of indole derivatives from readily available 2-alkynylanilines. This mini-review critically summarizes the literature reports in this field, with the aim to encourage further research activities in this promising area.     

Riparian Vegetation Mapping for Hydraulic Roughness Estimation Using Very High Resolution Remote Sensing Data Fusion

For detailed hydraulic modeling, accurate spatial information of riparian vegetation patterns needs to be derived in automatic fashion. We propose a supervised classification for heterogeneous riparian corridors with a low number of spectrally separate classes using data fusion of a Quickbird image and LIDAR data. The approach considers nine land cover classes including three woody riparian species, brush, cultivated areas, grassland, urban infrastructures, bare soil and water. The classical “stacked vector” approach is adopted for data fusion, while the nonparametric weighted feature-extraction method and the pixel-oriented maximum likelihood algorithm are used for feature-reduction and classification purposes, respectively. We test the approach over a 14-km stretch of the Sieve River (Tuscany Region, Italy). A one-dimensional river modeling is applied over the study reach comparing the results of a classification-derived hydraulic roughness map and a traditional ground-based approach. Despite the complex study reach, the classification method produced encouraging accuracies (OKS = 0.77) and represents a useful tool to delineate application domains of flow resistance models suited to different hydrodynamic patterns (e.g., stiff/flexible vegetation). Hydraulic modeling results showed that the remotely derived floodplain roughness parameterization captures the equivalent Manning coefficient over 20 test cross sections with uncertainty distributions described by low mean and standard deviation values.     

Synthesising CCS bisimulation using graph rewriting

The paper presents a case study on the synthesis of labelled transition systems (ltss) for process calculi, choosing as testbed Milner’s Calculus of Communicating System (ccs).The proposal is based on a graphical encoding: each ccs process is mapped into a graph equipped with suitable interfaces, such that the denotation is fully abstract with respect to the usual structural congruence.Graphs with interfaces are amenable to the synthesis mechanism proposed by Ehrig and König and based on borrowed contexts (bcs), an instance of relative pushouts originally introduced by Milner and Leifer.The bc mechanism allows the effective construction of an lts that has graphs with interfaces as both states and labels, and such that the associated bisimilarity is automatically a congruence.Our paper focuses on the analysis of the lts distilled by exploiting the encoding of ccs processes: besides offering major technical contributions towards the simplification of the bc mechanism, a key result of our work is the proof that the bisimilarity on processes obtained via bcs coincides with the standard strong bisimilarity for ccs.     

Fiber introduction mass spectrometry: fully direct coupling of solid-phase microextraction with mass spectrometry

This work describes the first fully direct coupling of solid-phase microextraction (SPME) with mass spectrometry. An inlet system using a septum as the only interface between the ambient and the high-vacuum mass spectrometer was constructed to allow the introduction of the SPME needle directly into the ionization region of a mass spectrometer. The PDMS-coated fiber was then placed and exposed exactly between the two ionization filaments. Uniform heating of the fiber, efficient thermal desorption, and electron ionization of the analytes were achieved. Using this new analytical technique, here termed fiber introduction mass spectrometry (FIMS), we have been able to detect and quantitate several volatile (VOC) and semivolatile (SVOC) organic chemicals (carbon tetrachloride, benzene, toluene, xylenes, gamma-terpinene, diisoamyl ether, chlorobenzene, and many PAHs) and two herbicides (Sylvex and its methyl ether) from aqueous solutions at low-ppb to ppt levels using either SPME headspace or solution extraction. FIMS shows high sensitivity (ng/L), good reproducibility, and accuracy, providing therefore a simple and effective approach to rapid analysis of VOC and SVOC in various matrixes.     

A Unifying and Rigorous Shape from Shading Method Adapted to Realistic Data and Applications

We propose a new method for the Lambertian Shape From Shading (SFS) problem based on the notion of Crandall-Lions viscosity solution. This method has the advantage of requiring the knowledge of the solution (the surface to be reconstructed) only on some part of the boundary and/or of the singular set (the set of the points at maximal intensity). Moreover it unifies in an unique mathematical formulation the works of Rouy et al. [34, 50], Falcone et al. [21], Prados et al. [46, 48, 49], based on the notion of viscosity solutions and the work of Dupuis and Oliensis [17] dealing with classical solutions and value functions. Also, it allows to generalize their results to the “perspective SFS” problem recently simultaneously introduced in [13,46,55]. While the theoretical part has been developed in [44], in this paper we give some stability results and we describe numerical schemes for the SFS based on this method. We construct provably convergent and robust algorithms. Finally, we apply our SFS method to real images and we suggest some real-life applications.     

Acoustic Emission Damage Assessment of Steel/CFRP Bonds for Rehabilitation

The use of adhesively bonded carbon fiber reinforced polymer (CFRP) laminates is increasingly being considered for the rehabilitation of metallic structures. The effective structural monitoring of steel/CFRP adhesive joints is of critical importance to assess the design service performance of the system, which ultimately depends on the bond damage tolerance at the load transfer regions. In the present study laboratory static and fatigue tests were conducted on steel/CFRP skin doubler and double strap joint specimens, which were monitored using the acoustic emission (AE) technique. The characteristics of the AE signals were correlated with the mechanical response of the samples, in order to understand the AE response associated with the accumulation of bond damage. One-dimensional source location was also performed to examine the initiation and the development of the disbond. The results show that AE parameter-based analysis is an effective nondestructive evaluation tool for bond damage detection and area location.     

WIRES: A Methodology for Developing Workflow Applications

Workflow management systems are becoming a relevant support for a large class of business applications, and many workflow models as well as commercial products are currently available. While the large availability of tools facilitates the development and the fulfilment of customer requirements, workflow application development still requires methodological guidelines that drive the developers in the complex task of rapidly producing effective applications. In fact, it is necessary to identify and model the business processes, to design the interfaces towards existing cooperating systems, and to manage implementation aspects in an integrated way. This paper presents the WIRES methodology for developing workflow applications under a uniform modelling paradigm – UML modelling tools with some extensions – that covers all the life cycle of these applications: from conceptual analysis to implementation. High-level analysis is performed under different perspectives, including a business and an organisational perspective. Distribution, interoperability and cooperation with external information systems are considered in this early stage. A set of “workflowability” criteria is provided in order to identify which candidate processes are suited to be implemented as workflows. Non-functional requirements receive particular emphasis in that they are among the most important criteria for deciding whether workflow technology can be actually useful for implementing the business process at hand. The design phase tackles aspects of concurrency and cooperation, distributed transactions and exception handling. Reuse of component workflows, available in a repository as workflow fragments, is a distinguishing feature of the method. Implementation aspects are presented in terms of rules that guide in the selection of a commercial workflow management system suitable for supporting the designed processes, coupled with guidelines for mapping the designed workflows onto the model offered by the selected system.