An improved algorithm for finding the median distributively

Given two processes, each having a total-ordered set ofn elements, we present a distributed algorithm for finding median of these 2n elements using no more than logn +O(logn) messages, but if the elements are distinct, only logn +O(1) messages will be required. The communication complexity of our algorithm is better than the previously known result which takes 2 logn messages.     

Molybdenum Oxycarbide and Tungsten Oxycarbide Coatings on Silicon Carbide Fibers

The strength and toughness of fibrous composites depend on the interface properties which control the bonding between the fibers and matrices. One method of controlling the interface involves coating the fiber with an appropriate material. In a previous study, it was found that there is a definite advantage in using low coating temperatures to prevent fibers from degrading. We therefore were interested in a report that Mo₂C could be deposited from Mo(CO)₆ at temperatures as low as 300° to 475°C. Our studies indicated that the material was not Mo₂C, but an oxycarbide, which, with an analogous tungsten oxycarbide coating, was applied to SiC yarns. Both oxycarbides could be converted to the metals by heat-treating in N₂.     

A novel microneedle array for the treatment of hydrocephalus

We present a microfabricated 10 by 10 array of microneedles for the treatment of a neurological disease called communicating hydrocephalus. Together with the previously reported microvalve array, the current implantable microneedle array completes the microfabricated arachnoid granulations (MAGs) that mimic the function of normal arachnoid granulations. The microneedle array was designed to enable the fixation of the MAGs through dura mater membrane in the brain and thus provide a conduit for the flow of cerebrospinal fluid. Cone-shaped microneedles with hollow channels were fabricated using a series of microfabrication techniques: SU-8 photolithography for tapered geometry, reactive ion etching for sharpening the microneedles, 248 nm deep UV excimer laser machining for creating through-hole inside the microneedles, and metal sputtering for improved rigidity. Puncture tests were conducted using porcine dura mater and the results showed that the fabricated microneedle array is strong enough to pierce the dura mater. The in vitro biocompatibility test result showed that none of the 100 outlets of the microneedles exposed to the bloodstream were clogged significantly by blood cells. We believe that these test results demonstrate the potential use of the microneedle array as a new treatment of hydrocephalus.     

Improved oxidative stability of sunflower oil in the presence of an oxygen-scavenging film

The oxidative stability of sunflower oil (SFO) was measured during storage at 23 and 37°C in the presence of a novel oxygen-scavenging film that contained polyfuryloxirane (PFO). Commercially refined and deodorized SFO was stored in a lighted room in sealed transparent packages containing either PFO film or an antioxidant, 0.02% butylated hydroxytoluene (BHT). Oxidative stability was evaluated by determination of peroxide values and gas-chromatographic measurement of headspace hexanal. SFO stored in the presence of the oxygen-scavenging film was more stable than oil stored without the film, or than film stored with 0.02% BHT. The PFO film scavenges oxygen through energy-transfer sensitization of singlet oxygen. The film is doped with eosin and the naturally-occurring dye, curcumin, which absorb over a wide range of visible wavelengths. Curcumin transfers its absorbed energy to eosin, which sensitizes the production of singlet oxygen. The singlet oxygen is scavenged by PFO. The use of two dyes increases the efficiency of the sensitization process, reducing the illumination time and intensity required for effective oxygen scavenging.     

Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization

Low density polyethylene (LDPE)/Mg-Al layered double hydroxide (LDH) nanocomposites have been synthesized with different compositions by melt-mixing technique using maleic anhydride grafted polyethylene as compatibilizer. LDH has been modified by sodium dodecylbenzene sulfonate using reconstruction method and characterized by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The nanocomposites are characterized by different techniques such as, transmission electron microscopy (TEM), XRD and rheology. The TEM analysis shows a complex nature of particle dispersion in the polymer matrix with wide distribution of particles sizes and shapes. The rheological analysis showed significant changes in linear viscoelastic responses of the composites, even at very low concentration (2 phr) of LDH materials, in comparison to the pure polymer in low frequency regime in dynamic frequency sweep experiments. These changes are related to the LDHs-polymer chains interactions resulting in network-like structure.     

Epoxy‐tert‐butyl poly(cyanoarylene ether) blends: Phase morphology,fracture toughness,and mechanical properties

Tert‐butyl hydroquinone–based poly(cyanoarylene ether) (PENT) was synthesized by the nucleophilic aromatic substitution reaction of 2,6‐dichlorobenzonitrile with tert‐butyl hydroquinone using N‐methyl‐2‐pyrrolidone (NMP) as solvent in the presence of anhydrous potassium carbonate in a nitrogen atmosphere at 200°C. PENT‐toughened diglycidyl ether of bisphenol A epoxy resin (DGEBA) was developed using 4,4′‐diaminodiphenyl sulfone (DDS) as the curing agent. Scanning electron micrographs revealed that all blends had a two‐phase morphology. The morphology changed from dispersed PENT to a cocontinuous structure with an increase in PENT content in the blends from 5 to 15 phr. The viscoelastic properties of the blends were investigated using dynamic mechanical thermal analysis. The storage modulus of the blends was less than that of the unmodified resin, whereas the loss modulus of the blends was higher than that of the neat epoxy. The tensile strength of the blends improved slightly, whereas flexural strength remained the same as that of the unmodified resin. Fracture toughness was found to increase with an increase in PENT content in the blends. Toughening mechanisms like local plastic deformation of the matrix, crack path deflection, crack pinning, ductile tearing of thermoplastic, and particle bridging were evident from the scanning electron micrographs of failed specimens from the fracture toughness measurements. The thermal stability of the blends were comparable to that of the neat resin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3536–3544, 2006     

Rheology of network forming systems

Viscosity and dynamic shear measurements are reported on several network forming systems as a function of reaction time and temperature. Phenolic, epoxy and EPDM rubber systems are examined. Rheological data are related to the reaction kinetics of the systems. With these relations overall activation energies, reaction orders and rate constants are interpreted from the data. These compare favorably with results in the literature. Applications of rheological techniques to processing problems of several network forming systems are described, specifically thermoset injection molding and SBR rubber vulcanization.     

Studies on the cure characteristics and vulcanizate properties of 50/50 NR/SBR blend

Blends of 50/50 natural rubber (NR) and styrene-butadiene rubber (SBR) are vulcanized using several conventional and semi-EV systems. The cure characteristics and vulcanizate properties are compared. The quantity and quality of crosslinks in each case are deciphered by chemical probes to correlated them with the vulcanizate properties.     

Oxidation by UV and Ozone of Organic Contaminants Dissolved in Deionized and Raw Mains Water

Organic contaminants dissolved in deionized pretreated and raw mains water were reacted with ultraviolet light and ozone. Ozone first was used for partial oxidation followed by ozone combined with ultraviolet radiation to produce total oxidation. The reduction of TOC level and direct oxidation of halogenated compounds were measured throughout the treatment process. The rate of TOC reduction was compared for ozone injected upstream and inside the reactor.     

Thermoplastic olefin/clay nanocomposites: Morphology and mechanical properties

Thermoplastic olefin (TPO)/clay nanocomposites were made with clay loadings of 0.6–6.7 wt %. The morphology of these TPO/clay nanocomposites was investigated with atomic force microscopy, transmission electron microscopy (TEM), and X‐ray diffraction. The ethylene–propylene rubber (EPR) particle morphology in the TPO underwent progressive particle breakup and decreased in particle size as the clay loading increased from 0.6 to 5.6 wt %. TEM micrographs showed that the clay platelets preferentially segregated to the rubber–particle interface. The breakup of the EPR particles was suspected to be due to the increasing melt viscosity observed as the clay loading increased or to the accompanying chemical modifiers of the clay, acting as interfacial agents and reducing the interfacial tension with a concomitant reduction in the particle size. The flexural modulus of the injection moldings increased monotonically as the clay loading increased. The unnotched (Izod) impact strength was substantially increased or maintained, whereas the notched (Izod) impact strength decreased modestly as the clay loading increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 928–936, 2004