Effect of hypoxemia on the erythropoietic activity of organs during perfusion

Hypoxemia (45-minute) influence in vivo on erythropoietic activity of the kidney, liver, spleen, and sternum was studied by normoxemic perfusion of the isolated organs. The erythropoietic activity proved to increase after 6-hour perfusion of the liver; this confirmed the participation of this organ in the extrarenal secretion of the erythropoietic factor.     

Lean NOx Trap Chemistry Under Lean-Gasoline Exhaust Conditions: Impact of High NOx Concentrations and High Temperature

The primary technical barrier to deployment of fuel saving lean gasoline engines is NOx emissions control. We conducted automated flow reactor experiments on a commercial LNT catalyst to identify opportunities and challenges associated with the higher temperatures and higher NOx concentrations expected in lean gasoline applications. Overall NOx conversion was quite high at low to moderate temperatures, but dropped off at high temperatures. The decrease in NOx conversion with temperature was worse for higher inlet NOx concentrations. As expected from equilibrium considerations, the catalyst stored more NOx under higher gas phase NOx concentrations, but that NOx was rapidly released during the rich phase and slipped out of the catalyst before it could be converted to N₂ by incoming reductant. This rich phase NOx release was the primary factor limiting performance of the catalyst at high temperatures, and resulted in significant spikes of NOx that would likely exceed any not-to-exceed regulated emissions levels. N₂O production was also significant, and increased with NOx concentration. The catalyst made very little NH₃ at high temperatures. NH₃ yield was significant at the lowest operating temperature studied, but it decreased with increasing NOx concentration.     

The regulatory mechanisms of the blood respiratory function in iron-deficiency anemias

Experience of vascular thrombosis prophylaxis and treatment after reconstructive operation conduction on abdominal aorta and peripheral arteries in 244 patients, including 112 of them immediately after the operation, 32-up to one year time, 100-in long-term follow-up period was summarized. Main aetiological cause for thrombosis occurrence immediately after the operation were technical and tactical failures committed during its conduction, in the early postoperative period-the neointima hyperplasia in the anastomosis area, in late terms-the blood outflow disorder from the reconstructed segment due to the atherosclerosis progression. Original methods of reoperation conduction for the transplant thrombosis and the outflow arteries reconstruction were proposed. Mortality lowering from 8.8 to 5.3% and the extremity revascularization occurrence, in 75% of patients immediately after the operation and in 84%-in long-term period was promoted owing to tactics of postoperative thrombosis treatment elaborated.     

Evidence of anomalous thermal expansion of water in cement paste

A comparative study of permeability measurement by thermopermeametry (TPA) and beam bending was performed on cement paste. To bring the two measurements into agreement, it is necessary to recognize that the pore solution has a thermal expansion coefficient about one and a half times that of bulk liquid and to account for viscoelastic stress relaxation during TPA experiments. The anomalous thermal expansion is not accounted for by the presence of ions in the cement paste pore solution.     

Technical note on cold weather installation of HDPE

In order to successfully seam HDPE flexible membrane liners (FMLs) in cold weather (less than 4·5°C (40°F), FML temperature may not be the most important factor. Secondary cold weather effects such as frozen subgrade, bridging, snow and ice removal, and worker discomfort pose a much more significant risk to the integrity of the liner installation.     

Neutral-atom recombination lasers in CO2laser-vaporized target material

Neutral-atom recombination lasers in the vaporized plasmas of 28 different elements are reported. The results, which are consistent with the predictions of a simple model of a plasma-recombination laser, demonstrate the wide applicability of CO2laser-produced plasmas as sources for laser excitation.     

An integrated,intelligent design environment

An integrated, intelligent design environment was designed and implemented. The heart of the environment is a userfriendly, menu-driven CAD system integrated with an information controller. The system allows the engineer to design in a feature-based, object-oriented manner. Designs are stored in a data base and checked for manufacturability and assembly by an expert system. This paper describes the design of the information integration controller and the man-machine interfaces of the intelligent design system.     

In Situ Measurement of Nonlinear Shear Modulus of Silty Soil

A new field test method to evaluate in situ nonlinear shear modulus of soils was developed. The method utilizes a drilled shaft as a cylindrical, axisymmetric source for shear loading of soil at depth. The applicability of the test method was studied by conducting small-scale, prototype experiments at a “calibration” field site in Austin, Texas. Numerous conventional in situ and laboratory measurements were performed to characterize the soil at the field site. The “small-scale” nature of the tests involved using a 381?mm (15?in.) diameter, 3.7?m (12?ft) long drilled shaft. Experimental results from this field study provided an opportunity to compare laboratory and field measurements of the G?log?γ and G/Gmax?log?γ curves. This comparison was used to investigate the accuracy of common procedures relating field and laboratory modulus reduction curves. Nonlinear modulus measurements were performed at depths of 1.8?to?2.1?m (6?to?7?ft) in a silt (ML). The field G/Gmax?log?γ curve for this soil at low confining pressures are in general agreement with the laboratory curve from an intact specimen as well as empirical curves.     

Evaluation of Sonochemical Destruction of PCE in In Situ Flushing Waste Fluids

Remediation of source zones at sites contaminated with dense non-aqueous-phase liquids using aggressive in situ flushing technologies, such as the addition of chemical additives known as cosolvents, have been implemented and successfully demonstrated in recent field tests. However, treatment of the waste fluids generated from such cleanup technologies has not received much attention. The purpose of this laboratory research was to evaluate the feasibility of using sonication as a method for treating waste fluids produced during in situ alcohol flushing at a site contaminated with a dense non-aqueous-phase liquid. Experimental results showed that sonochemical destruction of perchloroethylene (PCE) followed pseudo first-order kinetics and that increasing ethanol cosolvent percentages in the aqueous effluent resulted in decreasing degradation rates of PCE in solution. The energy efficiency (G = degradation∕energy input) of the sonication treatment also decreased as the ethanol volume fraction increased. Overall, sonication was seen to degrade PCE in aqueous solutions, becoming less effective as the cosolvent fraction increased.