A New Variable Diffusion Drying Model for the Second Falling Rate Period of Paddy Dried in a Rapid Bin Dryer

The objectives of this article is to propose a new drying model for the second falling rate period known as the variable diffusion controlled period that follows after the first falling rate period and to propose a new method to determine the second critical moisture content that separates these two periods. Experimental work on paddy drying at minimum fluidization velocity was carried out in a rapid bin dryer. The effects of operating temperatures (60-120°C) and bed depths (2-6 cm) on the paddy drying characteristics were investigated. It was found that the normalized drying rate of paddy was proportional to the normalized moisture content in the first falling rate period but in the second falling rate period, the normalized drying rate of the material varies exponentially with the normalized moisture content. The different relationship between the normalized drying rate and the normalized moisture content in the first and second falling rate periods indicate that two different mechanism of moisture transport are at work. The new exponential model of the second falling rate period and the linear model of the first falling rate period were found to fit the experimental data very well. Derivation from variable diffusion equation shows that the linear model is the result of constant diffusion coefficient whereas the new exponential model is the result of linear diffusion coefficient. This also implies that the first falling rate period is a constant diffusion controlled period and the second falling rate period is a variable diffusion controlled period. In addition, drying kinetics data of a drying process that fits the exponential model over a very slow drying period will show that the drying process is under the effect of a linear diffusion coefficient. It was also found that the proposed new method to determine the second critical moisture content that distinguishes between the first and second falling rate periods by using a sudden change in the value of the drying rate gradient to a much lower value at that point is more rigorous and yet simpler than the method of determining the specific location of the receding drying boundary since it is based on the behavior of the actual drying kinetic data.     

A new predictive search area approach for fast block motion estimation

According to the observation on the distribution of motion differentials among the motion vector of any block and those of its four neighboring blocks from six real video sequences, this paper presents a new predictive search area approach for fast block motion estimation. Employing our proposed simple predictive search area approach into the full search (FS) algorithm, our improved FS algorithm leads to 93.83% average execution-time improvement ratio, but only has a small estimation accuracy degradation. We also investigate the advantages of computation and estimation accuracy of our improved FS algorithm when compared to the edge-based search algorithm of Chan and Siu (see IEEE Trans. Image Processing, vol.10, p.1223-1238, Aug. 2001); experimental results reveal that our improved FS algorithm has 74.33% average execution-time improvement ratio and has a higher estimation accuracy. Finally, we further compare the performance among our improved FS algorithm, the three-step search algorithm, and the block-based gradient descent search algorithm.     

Electrotunable Non‐reciprocal Laser Emission from a Liquid‐Crystal Photonic Device

A liquid crystal (LC) photonic device with an anisotropic optical heterojunction structure has been fabricated. The device has a phase‐retarding nematic LC (NLC) layer sandwiched between two polymer cholesteric LC films with right‐handed helices of different pitches. Electrotunable non‐reciprocal light transmittance and unidirectional circularly polarized (CP) lasing emission have been successfully demonstrated for this device structure. Two left CP (LCP) lasing emission peaks are observed at the edges of the overlapping region between the two photonic bands in the structure and are shifted upon the application of a voltage. In contrast, a non‐reciprocal right CP (RCP) lasing emission peak emerges at one of the band edges and diminishes upon the application of a voltage. These phenomena are interpreted based on the selective reflection of RCP light and the reorientation of the NLC molecules by the application of a voltage.     

Pseudorandomness of Basic Structures in the Block Cipher KASUMI

The notion of pseudorandomness is the theoretical foundation on which to consider the soundness of a basic structure used in some block ciphers. We examine the pseudorandomness of the block cipher KASUMI, which will be used in the next‐generation cellular phones. First, we prove that the four‐round unbalanced MISTY‐type transformation is pseudorandom in order to illustrate the pseudorandomness of the inside round function FI of KASUMI under an adaptive distinguisher model. Second, we show that the three‐round KASUMI‐like structure is not pseudorandom but the four‐round KASUMI‐like structure is pseudorandom under a non‐adaptive distinguisher model.     

Quantification of free ketene acetals and determination of cure kinetics of poly(ortho ester)s by a facile deuterium labeling method

A facile method was developed to quantify unreacted ketene acetals during polymerization of poly(ortho ester)s. The method was based on isotopic (deuterium) labeling of the unreacted ketene acetal groups arising from the diketene acetal monomer, 3,9-diethylidene-2,4,8,10-tetraoxaspiro[5,5]undecane (DETOSU). In deuterium oxide, free ketene acetals are hydrolyzed to an α-deuterated ester; ortho ester bonds are hydrolyzed to the nondeuterated analog. The relative abundance of the deuterated ester side chain can be quantified by gas chromatography-mass spectrometry (GC-MS). In the current method, aliquots of a diketene acetal/polyol(s) reaction mixture were dissolved (crosslinked polymers swollen) in methylene chloride and excess D₂O. The diketene acetal/polyol(s) reaction mixture was hydrolyzed under mildly acidic conditions to yield pentaerythritol dipropionate (PDP; hydrolysis product of DETOSU). PDP was extracted into an organic phase, silylated, and analyzed by GC-MS. Fragments corresponding to the C₂H₅C?O+ ion (57 a.m.u.) and C₂H₄DC?O+ ion (58 a. m. u.) were monitored and the quantity of free ketene acetal groups were calculated from the peak areas of the chromatograms. The precision of the method was ±0.1%. The accuracy, as compared to a parallel ¹H-NMR study, was within 5%. This method permits determination of the cure end-point of a poly(ortho ester) polymerization reaction to within ±0.25%. The curing kinetics agreed well with DSC branching/crosslinking measurements. © 1994 John Wiley & Sons, Inc.     

Scenario normalization techniques - inline stepper coordinator design

In this paper, the scenario normalization technique is addressed, which is very useful in the context of generic equipment control, where an equipment-control system (ECS) is to control several pieces of equipment, possibly of different types. This paper begins with a background introduction to a photolithographic cell and the concept of generic equipment control adopted in semiconductor fabs. The concept of message modulation that translates in semantics context the sequence flows between the high-level ECS and the low-level equipment is presented. The main idea relies on the operational scenarios modeling by the sequence diagram; message translation based on semantics analysis; the derivation of production rules and the implementation of them on an event-triggering platform. Scenarios, thus obtained and presented to the high-level ECS by the coordinator, are then in compliance with the normalized scenario as required by the generic equipment controller. The significance of the proposed normalization techniques has the following implication: when different equipment are included in a cell operation, it is not necessary to rewrite control programs but to add relatively simpler transformation sequences enabling the use of the standard ECS function. From the control point of view, the controlled systems of stepper and track can be modeled as discrete event dynamic ones if operation coordination is considered.