高铝粉煤灰生产氧化铝过程中镓提取工艺研究

鉴于粉煤灰潜在的应用价值,粉煤灰循环再利用为兼顾经济和环保效益提供了绝佳的机会。本文全面的阐述了从预脱硅碱石灰烧结法生产氧化铝过程中提取镓的生产工艺。采用螯合离子交换树脂从铝浓度较高的种分母液中选择性分离低含量的镓,并对吸附数据进行了玻尔兹曼分布拟合及分析。文中还对工艺中孔蚀问题和玻璃鳞片的防腐性能进行了研究。     

20钢焊接缺陷磁记忆信号分析

对含有焊接缺陷的试块进行磁记忆检测,研究了金属磁记忆检测技术对裂纹、气孔、未焊透、未熔合、夹渣缺陷的检出能力,对裂纹、气孔、未焊透、未熔合、夹渣区域的磁场强度梯度平均值H_ave、最大值H_max、磁场强度梯度曲线围成的面积S(H)、磁场强度梯度平均值K_ave、最大值K_max、磁场强度梯度曲线围成的面积S(K)进行计算,并与无缺陷区域的参数进行对比分析.结果表明,焊缝中裂纹、气孔、未焊透、未熔合、夹渣区域的K_ave,K_max,S(K)明显区别于无缺陷区域,可以准确判定焊接缺陷位置;焊接缺陷和焊接残余应力虽然都会导致磁记忆信号的变化,但是二者具有本质不同.     

基于激光近炸引信的引战配合数学仿真设计

针对激光近炸引信和预制破片战斗部的引战系统,搭建了引战配合数学仿真系统,用于研究引战配合效率以及引战系统参数的优化设计。基于模块化和面向对象的设计思路,建立了典型目标的激光散射特性仿真模型、典型目标易损性及几何网格模型、引战配合延时模型、引战配合效率计算模型,仿真结果输出到可视化仿真模块实现了仿真结果的动画演示。通过仿真实例,验证了该引战配合仿真系统设计的合理性和可行性。     

Microstructure and mechanical properties of C/C–SiC composites fabricated by a rapid processing method

C/C–SiC composite was fabricated with time efficiency and low cost by a two-step process. A quasi 3D carbon-fiber-felt was firstly densified to C/C composite in 2–5 h by a thermal gradient CVI method based on precursor of kerosene. Then, the C/C composite of different porosities was reactively infiltrated with Si for 40 min to obtain C/C–SiC composite. The influence of the porosity of the C/C composite on the microstructure and mechanical properties of the C/C–SiC composite was investigated. The results show that the density of the C/C–SiC composite increases from 2.0 g/cm³ to 2.3 g/cm³ while its porosity decreases from 5.8% to 1.7% with the increasing porosity of the C/C composite. Moreover, the porosity of the C/C composite affects both the amounts of β-SiC, Si phases and the mechanical properties of the C/C–SiC composite. The flexural strength and modulus of the C/C–SiC composite are much higher than those of the C/C composite. The C/C–SiC composite from the C/C composite of 19.7% porosity has the highest flexural strength and modulus, which are 132 MPa and 14.4 GPa, respectively.     

Generalized projection method for a variational inequality system with different mapping in Banach spaces

The approximate solution of a system for variational inequality with different mapping in Hilbert spaces has been studied, based on the convergence of projection methods. However, little research has been done in Banach space. The primary reason is that projection mapping lacks preferable properties in Banach space. In this paper, we introduce generalized projection methods. By using these methods, the results presented in this paper have extended the main results of Chang et al.’s and Huang and Noor’s recent works [S.S. Chang, H.W. Joseph Lee, C.K. Chan, Generalized system for relaxed cocoercive variational inequalities in Hilbert spaces, Appl. Math. Lett. 20 (2007) 329–334; Zhenyu Huang, Muhammad Aslam Noor, An explicit projection method for a system of nonlinear variational inequalities with different (γ,r)-cocoercive mappings, Appl. Math. Comput. 190 (2007) 356–361] from Hilbert spaces to Banach space.     

随机通信网络分时管理分析

分析了时分网络的主要性能指标─—信息传递准确率，并给出其在各种结点类型中的计算公式，据此提出了时分网络中时隙分配的一些原则．     

利用定向钻实现水下沉船穿钢丝绳的方案研究

打捞沉船的关键技术之一是在沉船下穿钢丝绳。提出利用非开挖技术中的定向钻实现水下沉船穿钢丝绳的方案,用机械手段替代人工,提高打捞效率和安全性。     

基于参数测量、分析的断路器同步操作控制器研制

本文提出了一种基于永磁机构的同步开关的原理、实现及实际应用。该系统采用高速和高精度A/D采集与多处理器设计,可实现对10KV电网电参数的监测、分析,并按控制策略实现断路器最佳投切点的动态选取。系统参数和状态可通过键盘设置和查询,并由液晶屏显示结果。同传统的断路器投切相比,该系统能够有效地减少断路器投切过程中的暂态过程,因而具有实际应用价值。     

高可用应用开发平台的设计与实现

设计并实现了一个高可用应用开发平台，该平台提供了一个灵活的高可用编程环境，不仅包含高可用应用开发框架，还包含了应用开发所必需的检查点服务、分布式锁服务、事件服务、消息服务和成员服务等。采用该平台使得应用程序的开发只需要集中于具体的业务流程上，而不需要过多地考虑其他高可用特性，同时还可提供更强的可移植性。     

用可编程序控制器实现水泵联锁控制

介绍了适用于工业废水池水泵自动控制的简便易行的方法，该方法不使用水位转换仪表，直接使用可编程序控制器（Programmable Controller简称PC）即可实现水位高低检测与水泵的联锁控制。实践证明，这种方法简单可靠，维护工作量小。