Three schemes of remote information concentration based on ancilla-free phase-covariant telecloning

In this paper, remote information concentration is investigated which is the reverse process of the $1\rightarrow 3$ optimal asymmetric economical phase-covariant telecloning (OAEPCT). The OAEPCT is different from the reverse process of optimal universal telecloning. It is shown that the quantum information via $1\rightarrow 3$ OAEPCT procedure can be remotely concentrated back to a single qubit with a certain probability via several quantum channels. In these schemes, we adopt Bell measurement to measure the joint systems and use projected measurement and positive operator-valued measure to recover the original quantum state. The results shows non-maximally entangled quantum resource can be applied to information concentration.     

模糊逻辑在模拟演练系统智能体设计中的应用

根据模拟演练系统对智能体智能程度的要求为模拟演练系统添加模糊推理机,以增加演练系统的逼真程度及适应性. 本文以模糊逻辑理论为基础,以模拟演练系统为背景,对一个具体的应用实例进行数学建模,阐述了如何运用模糊逻辑来解决问题,并设计了模糊逻辑模块,通过应用实例演示验证了设计的可行性.     

Preparation and characterization of a PMMA/Ce(OH)3, Pr2O3/graphite nanosheet composite

An easy process for the synthesis of poly(methyl methacrylate)/Ce(OH)₃, Pr₂O₃/graphite nanosheet (PMMA/Ce(OH)₃, Pr₂O₃/NanoG) composite was developed. Graphite nanosheets (NanoG) were prepared by treating the expanded graphite with sonication in aqueous alcohol solution. The PMMA/Ce(OH)₃, Pr₂O₃/NanoG composites were prepared via in situ polymerization of MMA monomer in the presence of graphite nanosheets and Ce(OH)₃, Pr₂O₃ through reverse micelle template, in which the methyl methacrylate was designated as the oily phase. The composites were then dispersed with chloroform and coated on glass slides to form films. Scanning and transmission electron microscopy were used to characterize the structure and dispersion of the graphite nanosheets and the composites. The results showed that the high-aspect-ratio structure of the nanosheets played an important role in forming a conducting network in the PMMA matrix. From thermogravimetric analysis, the introduction of graphite nanosheets and inorganic nanopartices exhibited a beneficial effect on the thermal stability of PMMA.     

Thermal and mechanical properties of the polymers synthesized by the sequential polymerization of propylene and 1‐hexadecene

The block copolymer of poly(1‐hexadecene) (PHD) and polypropylene (PP) was effectively synthesized by the sequential polymerization of propylene and 1‐hexadecene by using highly isospecific TiCl₃/Cp₂Ti(CH₃)₂ (Cp = cyclopentadienyl). The block copolymers had two separate melting temperatures of constituent blocks. The modulus of PHD–PP block copolymer was enhanced as the content of sequentially polymerized PP block was increased. The elongation at break showed positive deviation at the intermediate compositions from the simple additive values of constituent homopolymers. Shape memory effect which utilizes the crystalline PHD block as a reversible phase and the crystalline PP block as a fixed structure was examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1709–1715, 2002; DOI 10.1002/app.10551     

宽带直流放大器的增益控制设计与研究

首先进行了方案论证与比较,分析各种方案的优点缺点,最后选择亚德诺半导体公司生产的低噪声增益可控集成运算放大器AD603和电流反馈型宽带运算放大器AD811等器件设计宽带直流放大器。输入级采用两级AD603级联,输出级设计通频带0~10MHz的带宽,通过单片机可以对放大器增益进行控制。该放大器具有频带宽、功率高、增益可调、带宽可选择等特点。此外,对提高直流放大器的各种性能指标提出了多种具体措施,在要求较高的系统中具有较强的实用性。     

CPE—g—VC接枝共聚树脂加工应用研究

本文用与PVC共混的方法,研究了CPE—g—VC作为PVC改性剂的力学性能及加工条件的关系,考察了CPE—g—VC共混物的转矩流变行为、毛细管流变行为和可加工性。结果表明:CPE—g—VC树脂具有许多优良特性,例如具有较高抗冲击强度、良好耐低温性、耐老化性、热稳定性、耐燃性等。在PVC共混物中,CPE—g—VC较CPE有更好的增韧效果,CPE—g—VC/PVC共混物具有较CPE/PVC共混物高3～4倍左右,较纯PVC高5～8倍左右的抗冲击强度。同CPE/PVC共混物相似,CPE—g—VC/PVC共混物加工区域较狭窄。     

Fe doping effect on EuTiO3: The magnetic properties and giant magnetocaloric effect

The magnetic properties and magnetocaloric effect for EuTi_1-xFe_xO₃ (x = 0.05, 0.1) compounds are investigated. When a part of Ti⁴⁺ions were substituted by Fe ions, the AFM ordering can be significantly changed to be FM. The EuTi_1-xFe_xO₃ (x = 0.05, 0.1) compounds exhibit a PM to FM transition with decreasing temperature and the Curie temperature is 6 K. Under the field changes of 1 T, and RC are valued to be 10.1 J/kg K and 50.2 J/kg for EuTi_0.95Fe_0.05O₃; 9.6 J/kg K and 47.7 J/kg for EuTi_0.9Fe_0.1O₃, without magnetic and thermal hysteresis. RC is almost twice as much as EuTiO₃ (27 J/kg) as substitution of Fe³⁺ ions for Ti⁴⁺ions, which may be attributed to the magnetic transition (AFM to FM). Therefore, the giant and large RC suggest the EuTi_1-xFe_xO₃ compounds are good materials for magnetic refrigerant.     

Preparation,characterization and salt-resistance of a coal based super absorbent composite

Potassium humate was extracted from brown coal.A novel super absorbent composite,poly (acrylic acid-co-acrylamide)/potassium humate (PAA-AM/KHA),was prepared by graft polymerization of acrylic acid,acrylamide and coal based potassium humate using N,N'-methylenebisacrylamide as a crosslinker and potassium peroxydisulfate as an initiator.The effects of reaction temperature,degree of neutralization of the poly (acrylic acid) and the amounts of crosslinker,initiator and potassium humate were investigated.Salt resistance tests were also carried out.The composite prepared under optimal conditions had a potassium humate content of 10% and exhibited a water absorption of 770 g/g in distilled water,and 349,286 and 41 g/g in 0.5 mol/L KC1,MgCl2 and AlCl3 solutions respectively.The results indicate that the salt resistance of PAA-AM/KHA was superior to that of poly (acrylic acid-co-acrylamide) because of the collaborative effect of functional groups of the coal based potassium humate.The PAA-AM/KHA micro powder was characterized by IR spectroscopy and the micrographic surface was characterized by scanning electron microscopy.Introduction of potassium humate into the poly (acrylic acid-co-acrylamide) structure creates a composite more suitable for use as a water-managing material in the renewal of arid and desert environments.The salt resisting property of the composite is improved,production costs are reduced and the growth stimulant effect is still present.     

A process study of electron beam nano-lithography and deep etching with an ICP system

A systemic process study on an electron beam nanolithography system operating at 100 kV was present. The exposure conditions were optimized for resist ZEP520A. Grating structures with line/space of 50 nm/50 nm were obtained in a reasonably thick resist which is beneficial to the subsequent pattern transfer technique. The ICP etching process conditions was optimized. The role of etching parameters such as source power, gas pressure, and gas flow rate on the etching result was also discussed. A grating structure with line widths as small as 100 nm, duty cycles of 0.5, depth of 900 nm, and the side-wall scalloping as small as 5 nm on a silicon substrate was obtained. The silicon deep etching technique for structure sizes smaller than 100 nm is very important for the fabrication of nano-optical devices working in the visible regime. Supported by the National Basic Research Program of China (“973” Program) (Grant No. 2007CB935301)     

Model of cold crystallization of uniaxially oriented poly(ethylene terephthalate) fibers

The differential scanning calorimeter heating curves of uniaxially oriented poly(ethylene terephthalate) (PET) fibers with three peaks were analyzed by using a newly proposed equation. The diffusion-controlled crystallization theory is suitable for describing cold crystallization of uniaxially oriented PET fibers. A crystallization model was proposed based on the kinetic parameters obtained. The model embraces the three sub-processes of crystallization corresponding to different growth geometries. The first sub-process corresponds to the nucleation of ordered molecular segments or the radial growth of preformed nucleus, resulting in the shorter bundle-like entities. The second sub-process corresponds to further growth of the bundle-like crystallites along chain direction, resulting in the longer bundle-like entities. The third sub-process corresponds to the three-dimensional growth of crystallites relating to the random segments, resulting in the spherical entities.