Survey of shell egg processing plant sanitation programs: effects on non-egg-contact surfaces

To successfully implement a hazard analysis critical control point plan, prerequisite programs are essential. Sanitation standard operating procedures are an important part of such a plan and can reduce contamination levels so that food safety and quality are not adversely affected. Noncontact surfaces in the shell egg processing plants can serve as a reservoir of cross-contamination. The objective of this study was to assess the efficacy of sanitation programs used in a variety of shell egg processing facilities (in-line, off-line, and mixed operations). Fourteen different noncontact surfaces were sampled in nine commercial facilities across the southeastern United States. Non-egg-contact surfaces were defined as those where the shell egg does not come into direct contact with the surface or with the fluid from that surface. Gauze pads soaked in sterile phosphate-buffered saline were used for sampling at the end of a processing day (POST) and again the next morning prior to operations (PRE). Aerobic plate counts (APCs) and numbers of Enterobacteriaceae were determined. No significant differences (P > 0.05) were found between POST and PRE counts for either population recovered from the 14 sampling sites. Only samples from the floor under the farm belts, nest-run loader, washers, and packer heads were reduced by 1 log CFU/ml of rinsate for APCs or Enterobacteriaceae counts. APCs of more than 10(4) CFU/ml of rinsate were recovered from many samples. Highest APCs were found on the floor under the farm belt and on shelves of the nest-run carts. High APCs were found on the wheel surface for off-line carts and on the loading dock floor. Highest Enterobacteriaceae counts were found in samples from the floor, drain, and nest-run egg cart shelves. A lack of significant difference between POST and PRE counts indicates that current sanitation programs could be improved. These data suggest that traffic patterns for the movement of eggs and materials through the plant should be reevaluated so that cross-contamination is reduced.     

Taking the load off: investigations of how adaptive cruise control affects mental workload

It has been posited that Adaptive Cruise Control (ACC) represents a new generation of vehicle automation, in that it has the potential to relieve drivers of mental as well as physical workload. The results of previous research however, have raised some confusing issues about the specific effects of Adaptive Cruise Control (ACC) on driver mental workload (MWL)--some studies report reduced MWL compared to manual driving, while others find no effect. Two hypotheses are proposed in an attempt to explain these discrepancies: (a) that any potential MWL reductions due to ACC could be masked by the overriding influence of steering demand; or (b) that the tasks designed in some experiments do not exploit the adaptive nature of the ACC system, therefore precluding any potential benefits. Two related experiments were designed to test these hypotheses. It was found that the main reason for the discrepant findings was the nature of the driving task chosen--constant-speed tasks do not realise the mental workload benefits of ACC. Future researchers using ACC devices are advised to use variable-speed tasks to ensure that all aspects of device functionality are covered.     

Differential mass spectrometry: a label-free LC-MS method for finding significant differences in complex peptide and protein mixtures

Efficiently identifying and quantifying disease- or treatment-related changes in the abundance of proteins is an important area of research for the pharmaceutical industry. Here we describe an automated, label-free method for finding differences in complex mixtures using complete LC-MS data sets, rather than subsets of extracted peaks or features. The method selectively finds statistically significant differences in the intensity of both high-abundance and low-abundance ions, accounting for the variability of measured intensities and the fact that true differences will persist in time. The method was used to compare two complex peptide mixtures with known peptide differences. This controlled experiment allowed us to assess the validity of each difference found and so to analyze the method's sensitivity and specificity. The method detects both presence versus absence and a 2-fold change in peptide concentration near the limit of detection of the instrument used, where chromatographic peaks may not be sufficiently well defined to be detected in individual samples. The method is more sensitive and gives fewer false positives than subtractive methods that ignore signal variability. Differential mass spectrometry combined with targeted MS/MS analysis of only identified differences may save both computation time and human effort compared to shotgun proteomics approaches.     

High numerical aperture in multimode microstructured optical fibers

Microstructured or "air-clad" fibers, with air holes surrounding a large core, have recently demonstrated much wider light-acceptance angles than conventional fibers. An original and accurate method is presented for determining the numerical aperture of such fibers using leaky modes. The dependence on length, wavelength, and various microstructure dimensions are evaluated for the first time for a class of fibers that exhibit exceptionally high numerical apertures. These results show excellent agreement with published measurements on similar fibers and verify that bridge thicknesses much smaller than the wavelength are required for high numerical apertures.     

A critical evaluation of the strategy project

The STRATEGY project (sustainable restoration and long-term management of contaminated rural, urban and industrial ecosystems; www.strategy-ec.org.uk) addressed the need for a holistic decision framework for the selection of optimal remediation strategies for long-term sustainable management of contaminated areas in Western Europe. The project considered both technical and social aspects of implementing restoration strategies for urban and rural environments. The importance of considering socially relevant objectives in addition to the dose reduction was emphasised. A critical evaluation was carried out on 101 selected countermeasures, (including rural waste disposal options), a model was developed to aid optimising countermeasure strategies and a method of carrying out participatory decision-making suggested. The outputs of the project are described and critically evaluated.     

Molecular weight characteristics of humic substances from different environments as determined by size exclusion chromatography and their statistical evaluation

Recorded molecular weights (MWs) for humic substances (HS) range from a few hundred to millions of daltons. For purposes of defining HS as a specific class of chemical compounds, it is of particular importance to ascertain if this broad range of MWs can be attributed to actual variability in molecular properties or is simply an artifact of the analytical techniques used to characterize HS. The main objectives of this study were (1)to establish if a preferential range of MWs exists for HS and (2) to determine any consistent MW properties of HS. To reach the goal, we have undertaken an approach to measure under standardized conditions the MW characteristics of a large set of HS from different natural environments. Seventy-seven humic materials were isolated from freshwater, soil, peat, and coal, such that each possessed a different fractional composition: humic acid (HA), fulvic acid (FA), and a nonfractionated mixture of HA and FA (HF). Size exclusion chromatography (SEC) was used as the analytical technique to determine molecular weight characteristics. The MW distributions were characterized by number (Mn) and weight (Mw) average MW, and by polydispersity. The complete range of Mw values varied within 4.7-30.4 kDa. The maximum Mw values were observed for peat HF and soil HA, whereas the smallest weights were measured for river water HF. Maximum values of polydispersity (3.5-4.4) were seen for peat HF and soil HA, while much lower values (1.6-3.1) were found for all preparations isolated with XAD-resins. Statistical evaluation showed consistent Mw and Mn variations with the HS source, while polydispersity was mostly a function of the isolation procedure used. A conclusion was made that HS have a preferential range of MW values that could characterize them as a specific class of chemical compounds.     

A permeability-controlled microfiltration membrane for reduced fouling in drinking water treatment

A novel surface-modified polypropylene microfiltration membrane is investigated for its potential use in drinking water treatment. The flux decline rate of the modified membrane is substantially lower than the original polypropylene membrane for filtration of a soft, high-natural organic matter (NOM) surface water because a progressive adjustment in membrane permeability counteracts the flux decline due to fouling. In general, the prospects for reduced flux decline by membrane modification depend upon the characteristics of raw water such as hardness, particulate and NOM properties and concentration, and pretreatment strategies.     

Sources of lipids in parenteral and enteral nutrition

The review is devoted to sources of lipids in enteral and parenteral nutrition. The role of omega-3 and omega polyunsaturated fatty acids in metabolism of some lipid mediators is examined.     

Production compilation: a simple mechanism to model complex skill acquisition

In this article we describe production compilation, a mechanism for modeling skill acquisition. Production compilation has been developed within the ACT-Rational (ACT-R; J. R. Anderson, D. Bothell, M. D. Byrne, & C. Lebiere, 2002) cognitive architecture and consists of combining and specializing task-independent procedures into task-specific procedures. The benefit of production compilation for researchers in human factors is that it enables them to test the strengths and weaknesses of their task analyses and user models by allowing them to model the learning trajectory from the main task level and the unit task level down to the key-stroke level. We provide an example of this process by developing and describing a model learning a simulated air traffic controller task. Actual or potential applications of this research include the evaluation of user interfaces, the design of systems that support learning, and the building of user models.     

Angstrom-range optical path-length measurement with a high-speed scanning heterodyne optical interferometer

A highly accurate method of optical path-length measurement is introduced by use of a scanning heterodyne optical interferometer with no moving parts. The instrument has demonstrated the potential to measure optical path length at angstrom resolution over continuous thickness in the micrometer range. This optical path length can be used to calculate the thickness of any material if the refractive index is known or to measure the refractive index of the material if the thickness is known. The instrument uses a single acousto-optic device in an in-line ultra-stable reflective geometry to implement rapid scanning in the microsecond domain for thickness measurements of the test medium.