Separation of recombinant human erythropoietin glycoforms by capillary electrophoresis using volatile electrolytes. Assessment of mass spectrometry for the characterization of erythropoietin glycoforms

The separation of the glycoforms of erythropoietin (EPO) by capillary electrophoresis (CE) was recently published as a monograph by the European Pharmacopoeia (European Pharmacopoeia 4 2002, 1316, 1123-1128). Although the experimental CE conditions employed a background electrolyte containing additives suitable for on-line UV-absorption detection, they were not appropriate for on-line mass spectrometry (MS) detection. In this work, an attempt was made to investigate experimental conditions employing volatile electrolyte systems to achieve the separation and characterization of EPO glycoforms using CE and ESI-MS methodologies. The influence of several operating conditions, such as the coating of the internal walls of the capillary as well as the composition, concentration, and the pH of the separation buffer were investigated. The results demonstrated that when the internal walls of the capillaries were permanently coated with Polybrene and a buffer electrolyte containing 400 mM of HAc-NH4Ac (acetic acid-ammonium acetate), pH 4.75, was used, a significantly reproducible separation was achieved for EPO glycoforms. Intact EPO was characterized by two mass spectrometry techniques: electrospray ionization (ESI-MS) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF-MS). The data demonstrated that MALDI-TOF-MS provided a good approximation to an average molecular mass of the EPO molecule. However, it was still necessary to carry out further separation of the intact EPO glycoforms in order to obtain molecular mass information when ESI-MS was used.     

Capacitive micromachined ultrasonic transducers with diffraction-based integrated optical displacement detection

Capacitive detection limits the performance of capacitive micromachined ultrasonic transducers (CMUTs) by providing poor sensitivity below megahertz frequencies and limiting acoustic power output by imposing constraints on the membrane-substrate gap height. In this paper, an integrated optical interferometric detection method for CMUTs, which provides high displacement sensitivity independent of operation frequency and device capacitance, is reported. The method also enables optoelectronics integration in a small volume and provides optoelectronic isolation between transmit and receive electronics. Implementation of the method involves fabricating CMUTs on transparent substrates and shaping the electrode under each individual CMUT membrane in the form of an optical diffraction grating. Each CMUT membrane thus forms a phase-sensitive optical diffraction grating structure that is used to measure membrane displacements down to 2/spl times/10/sup -4/ /spl Aring///spl radic/Hz level in the dc to 2-MHz range. Test devices are fabricated on quartz substrates, and ultrasonic array imaging in air is performed using a single 4-mm square CMUT consisting of 19/spl times/19 array of membranes operating at 750 kHz.     

Nanostructured artificial nacre

Finding a synthetic pathway to artificial analogs of nacre and bones represents a fundamental milestone in the development of composite materials. The ordered brick-and-mortar arrangement of organic and inorganic layers is believed to be the most essential strength- and toughness-determining structural feature of nacre. It has also been found that the ionic crosslinking of tightly folded macromolecules is equally important. Here, we demonstrate that both structural features can be reproduced by sequential deposition of polyelectrolytes and clays. This simple process results in a nanoscale version of nacre with alternating organic and inorganic layers. The macromolecular folding effect reveals itself in the unique saw-tooth pattern of differential stretching curves attributed to the gradual breakage of ionic crosslinks in polyelectrolyte chains. The tensile strength of the prepared multilayers approached that of nacre, whereas their ultimate Young modulus was similar to that of lamellar bones. Structural and functional resemblance makes clay- polyelectrolyte multilayers a close replica of natural biocomposites. Their nanoscale nature enables elucidation of molecular processes occurring under stress.     

Experimental set-up for measuring diffusive and advective transport of radon through building materials

This study describes an approach for measuring and modelling diffusive and advective transport of radon through building materials. The goal of these measurements and model calculations is to improve our understanding concerning the factors influencing the transport of radon through building materials. To reach this goal, a number of experiments have to be conducted. These experiments, including measurements in a large cylinder for creating diffusive and advective transport of radon under controlled, 'dwelling-like' conditions, are described here and the initial results are presented. A better understanding about the transport of radon through building materials will lead to more effective ways to decrease or to prevent the entrance of radon into dwellings.     

Assessment of the effectiveness of biologically active food additives based on zeolites in experimental animals

The aim of present study was an investigation of effective of product from ceolites which is suggested as biologically active food additive. The high-calorie, high-fat, high-cholesterol diet was developed. The rats (female and male) were fed with the biologically active food additive during 1 month at dose 70 mg per kg of body weight. Their blood and liver were investigated to measure total lipids, total cholesterols, phospholipid, triglycerides. Morphologic parameters of liver was studied. Cholesterol lowering effect of biologically active food additive in rat (female) has been shown.     

Partially folded conformations in the folding pathway of bovine carbonic anhydrase II: a fluorescence spectroscopic analysis

GdmCl-, urea-, and pH-induced unfolding pathways of bovine carbonic anhydrase II have been analyzed by using changes induced by different denaturing agents in intensity, anisotropy, life time, and parameter A value of intrinsic fluorescence as well as intensity and life time of ANS (ammonium salt of 8-anilinonaphthalene-1-sulfonic acid) fluorescence. The formation of several stable unfolding intermediates, some of which were not observed previously, has been established. This was further confirmed by representation of fluorescence data in terms of a "phase diagram", that is, I(lambda1) versus I(lambda2) dependence, where I(lambda1) and I(lambda2) are the fluorescence intensity values measured at wavelengths lambda(1) and lambda(2), respectively.     

Numerical Simulation of Heat Transfer and Deformation of Initial Shell in Soft Contact Continuous Casting Mold Under High Frequency Electromagnetic Field

  Heat transfer and deformation of initial solidification shell in soft contact continuous casting mold under high frequency electromagnetic field were analyzed using numerical simulation method; the relative electromagnetic parameters were obtained from the previous studies. Owing to the induction heating of a high frequency electromagnetic field (20 kHz), the thickness of initial solidification shell decreases, and the temperature of strand surface and slit copper mold increases when compared with the case without the electromagnetic filed. The viscosity of flux decreases because of the induction heating of the high frequency electromagnetic field, and the dimension of the flux channel increases with electromagnetic pressure; thus, the deformation behavior of initial solidification shell was different before and after the action of high frequency electromagnetic field. Furthermore, the abatement mechanism of oscillation marks under high frequency electromagnetic field was explained.     

“三九九”植物增长素喷施葡萄增产作用大

“三九九”植物增长素喷施葡萄增产作用大余金水陈月英陈新金（韶关市农科所，５１２０２８）“三九九”植物增长素，由潍坊“三九九”生物化工研究所与山东省八达科技发展公司联合开发出的一种改善植物体、物理性状的生长促进剂。具有使植物增产、早熟、抗旱、抗涝、抗病...     

Indoor air pollution and its impact on children under five years old in Bangladesh

Indoor air concentrations of volatile organic compounds (VOCs), carbon monoxide (CO), carbon dioxide (CO2), nitrogen dioxide (NO2), and dust particles were measured for 49 biomass and 46 fossil fuel users in urban slums of Dhaka, Bangladesh. The health impacts of these pollutants were assessed on 65 and 51 children under five years old from families who use biomass and fossil fuel as main source of energy, respectively. Mean concentrations of CO were found to be significantly higher in biomass fuel users (P = 0.010), while geometric mean concentrations of benzene, xylene, toluene, hexane, total VOCs, and NO2 were significantly higher (P < 0.01) in the fossil fuel users. Symptoms such as redness of eyes, itching of skin, nasal discharge, cough, shortness of breath, chest tightness, wheezing, or whistling chest were found to be associated with the choice of biomass fuel, with the odds ratio ranging from 4.0 to 6.3. No significant association of use of biomass fuel with respiratory diseases, eczema, diarrhea, or viral fever was observed after adjustment for potential confounders. These results suggest a significant association between the biomass fuel-using population and respiratory symptoms. These symptoms may not be due to the pollutants only, as some other underlying causes may be present. PRACTICAL IMPLICATIONS: The health of children under five years old in Bangladesh, especially those living in poor socioeconomic conditions, is considered to be worsening because of indoor air pollution. It is commonly suggested that biomass fuel should be replaced by fossil fuel, as pollution levels are believed to be higher with biomass fuel. Our findings, however, suggest that pollution can be higher with fossil fuels, and indicate that a switch in fuel from biomass to fossil does not necessarily improve the children's health. Awareness programs should therefore be undertaken to avoid the unnecessary use of gas. Clean fuels and clean stoves should also be ensured to reduce emissions of indoor air pollutants.