Case Study: Refinement of Hydraulic Operation of a Complex CSO Storage/Treatment Facility by Numerical and Physical Modeling

The performance of a combined sewer overflow (CSO) storage/treatment facility in North Toronto, Ont., Canada, was investigated by conjunctive numerical and physical (hydraulic) modeling. The main objectives of the study were to (1) assess the feasibility of increasing the hydraulic loading of the CSO facility without bypassing; and (2) establish a verified numerical model of the facility for future work. The numerical model [a commercial computational fluid dynamics (CFD), PHOENICS] was validated and verified using results from a hydraulic scale model (1:11.6). The results obtained show that the CFD model can simulate hydraulic conditions in the facility well, as demonstrated by accurate reproduction of the filling rate, water levels at various locations, flow velocities in feed pipes, and overflows from the inflow channel. Numerical simulations identified excessive local head losses and helped select structural changes to reduce such losses. The analysis of the facility showed that with respect to hydraulic operation, the facility is a complex, highly nonlinear hydraulic system. Within the existing constraints, a few structural changes examined by numerical simulation could increase the maximum treatment flow rate in the CSO storage/treatment facility by up to 31%.     

Mate selection preferences: Gender differences examined in a national sample.

Social psychologists have devoted considerable theoretical and empirical attention to studying gender differences in traits desired in a mate. Most of the studies on mate preferences, however, have been conducted with small, nonrepresentative samples. In this study, we analyzed data collected from single adults in a national probability sample, the National Survey of Families and Households. Respondents were asked to consider 12 possible assets or liabilities in a marriage partner and to indicate their willingness to marry someone possessing each of these traits. These data extended previous research by comparing men's and women's mate preferences in a heterogeneous sample of the national population and by comparing gender differences in different sociodemographic groups. The gender differences found in this study were consistent with those secured in previous research (e.g., youth and physical attractiveness were found to be more important for men than for women; earning potential was found to be less important for men than for women) and were quite consistent across age groups and races. However, the various sociodemographic groups differed slightly in the magnitude of gender differences for some of the mate preferences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The use of direct democracy to decide housing site allocations in English neighbourhoods

Abstract

The aim of this article is to reclaim the democratic legitimacy of self-selecting and informed publics in citizen engagement in housing development planning. It argues for an approach to public participation in which the issues, and the articulation of conflicting attachments to those issues, are understood as the occasion for democratic politics. The article illustrates this approach in an analysis of the use of direct democracy to decide housing allocations in the policy of neighbourhood planning in England. Drawing on literature from Science and Technology Studies and actor–network theory, it evidences the public articulation of house-building as a matter of concern and identifies the agency of housing in enrolling publics, translating interests and in fostering debate and contention. It concludes that the articulation of conflicting interests can deepen democratic engagement in housing development planning and open up the exclusions through which this issue is currently framed.     

Characterization of pili nut (Canarium ovatum) oil: Fatty acid and triacylglycerol composition and physicochemical properties

The fatty acid and triacylglycerol composition of pili nut (Canarium ovatum) oil and fractions were analyzed by gas chromatography and reversed-phase high-performance liquid chromatography, respectively. The oil obtained by solvent extraction was low in polyunsaturated fatty acids and high in saturates. The polyunsaturated fatty acid (18∶2 and 18∶3) contents were less than 11%, whereas palmitic (16∶0) and stearic acid (18∶0) were 33.3 and 10.9%, respectively. The saturated fatty acid level of the low-melting fraction oil was reduced from 44.4 to 35.5% and the total unsaturated fatty acid levels were increased from 55.6 to 65% by fractional crystallization. Triacylglycerol analysis showed that the high-melting fraction (HM) from pili nut oil consisted of POP, POS, and SOS+SSO (P=palmitic acid, O=oleic acid, and S=stearic acid) in the proportion of 48.6, 38.8, and 8.7%, respectively. The physicochemical properties of the HM fraction were studied using differential scanning calorimetry and pulsed nuclear magnetic resonance. The results showed that the melting range and solid fat content of the HM fraction were very similar to those isolated from cocoa butter and olive oil. The content of POP played an important role in determining the melting range of the HM fraction. It is suggested that this HM fraction may have applications as a cocoa butter substitute in confectionery products.     

Clonidine for major vascular surgery in hypertensive patients: a double-blind, controlled, randomized study

The utility of clonidine for hypertensive patients presenting for major vascular procedures remains debatable. Twenty-one hypertensive patients presenting for aortic surgery were given clonidine (n = 11) or placebo (n = 10) in a double-blind, randomized manner. Clonidine was administered 6 micrograms/kg per os 120 min before induction of anesthesia and 3 micrograms/kg intravenously (i.v.) over 60 min from aortic declamping to skin closure. Anesthesia was induced with alfentanil 20 micrograms/kg, midazolam, and atracurium and maintained with nitrous oxide 70%, an alfentanil infusion (0.25 microgram.kg-1. min-1), and isoflurane. Anesthetic requirements, circulatory variables, interventions, and isoproterenol dose-response curves (pre- and postoperatively) were determined. Plasma concentrations of clonidine, alfentanil, and vasoactive hormones were measured. When the clonidine group was compared with the placebo group, (a) isoflurane, alfentanil, and midazolam requirements were reduced by 38%, 42%, and 41%, respectively (P = 0.04, 0.03, 0.0002, respectively); (b) supplemental circulatory and anesthetic adjustments were reduced by 51% (P = 0.0006); (c) interventions with vasopressors were not significantly increased (placebo: two; clonidine: five); (d) systolic and mean arterial pressures and heart rate were reduced; (e) increases in norepinephrine, epinephrine, and plasma renin activity were suppressed, whereas vasopressin surge was attenuated; and (f) chronotropic response to isoproterenol was unaffected. Clonidine was effective in reducing anesthetic requirements and in improving circulatory stability in hypertensive patients presenting for major vascular procedures.     

Study of the lithium insertion–deinsertion mechanism in nanocrystalline γ-Fe2O3 electrodes by means of electrochemical impedance spectroscopy

Lithium intercalation hosts are a key point to the energy density of the largely used LiCoO₂ (even if of high cost and toxicity) as well as of manganese oxides which have been investigated most extensively. Iron oxides are attractive electrode materials for low-voltage rechargeable lithium batteries from both cost and environmental standpoints. However, search for iron oxides of conventional crystalline structures and micrometer particle sizes as lithium intercalation cathodes, has been greeted with disappointing results. Here we report on the synthesis, characterizations, electrochemical study and electrochemical impedance spectroscopy (EIS) of a nanocrystalline γ-Fe₂O₃ that simultaneously exhibits high lithium insertion capacity and good capacity retention upon cycling. These properties reveal thermodynamics of the nanocrystalline material inherently different from those of its microcrystalline counterpart. Moreover, EIS showed that the intercalation process of the lithium ion occurs according to two processes involving first the reduction of the surface Fe³⁺ with concomitant charge neutralization by Li⁺ ions onto the surface defects of the nanoparticle followed by the reduction of the core Fe³⁺ with insertion of the Li⁺ deeper in the particle.