浅谈应用标准进行软件测试

国家标准GB T175 44规定了软件包的质量要求及针对这些要求如何对软件包进行测试的细则。质量要求从产品描述、用户文档、程序及数据三个方面进行了规定 ,测试细则依据这些规定制定。ISO IEC912 6 (1991)版由ISO IEC 912 6 (软件产品质量 )和ISO IEC14 5 98(软件产品评测 )两个标准代替 ,ISO IEC912 6表述了软件产品质量的内部质量、外部质量和使用中的质量 ,规定了内部质量、外部质量的六个质量特性 ,并细分为 2 1个子特性 ,使用中的质量规定了四个使用质量特性 ,使用质量是指六个软件产品质量特性的综合效果。进行软件测试时 ,可以依据GB T175 44中的规定组织测试过程再结合ISO IEC912 6中的质量特性及子特性的规定确定测试需求的内容和测试的重点 ,利用ISO IEC912 6质量的规定建立质量评级的标准。     

水力旋流器用于酸性油分离的研究

采用自行研制的水力旋流器进行了降低酸性油酸值的工业实验。实验表明,水力旋流器可将酸值为13．3 mgKOH/g的酸性油酸值降至12 mgKOH/g左右,从而能满足工业生产要求,沉降时间大为缩短。     

基于ADSP21XXC运行环境下FFT的实现

介绍了数字信号处理器ADSP21XX芯片的特点以及实现FFT(快速离散付里叶变换)的方法，给出了ADSP21XX的C和汇编混合编程的特点及技巧。     

防腐蚀涂料的性能与选择

介绍并比较几种常用的防腐蚀涂料的品种、组成和性能特点，提出防腐蚀涂料的选择原则。     

合成己二腈反应技术研究——(Ⅴ)己二腈工业反应过程模拟与反应器改造

对己二腈工业反应器提出了两釜串联带回流的模型,通过模拟计算得出模型的级间返混系数 f=6的结论。该模型能较好地预测工业反应器中物料组分浓度变化和气、液两相的流动特性;指出了现工业反应器的鼓泡中和段体积偏小是造成己二酸浓度偏高的关键;提出了可以通过增加串连一个鼓泡预反应段的改造方案,能有效地降低己二酸的浓度,从7%降至4%左右,从而能较好地减缓腐蚀和结焦。     

Control of stroma-dependent hematopoiesis by basic fibroblast growth factor: stromal phenotypic plasticity and modified myelopoietic functions

The immunological agglutination reactions of physically absorbed F(ab')2 molecules onto anionic and cationic latex particles have been investigated by means of optical absorbance measurements. These measurements have been conducted under different conditions to determine the most influential factors. Surface F(ab')2 and BSA densities, particle concentration in the reaction medium and polyethylene glycol concentration are some of these factors. Sensitized cationic and anionic latexes differ considerably with respect to their colloidal stability and reactivity. As a general rule, the sensitized cationic latex has a relatively higher colloidal stability and hence, it provides reagents with a better optical response. Less than 0.025 microgram/ml of C-reactive protein has been detected using this particle enhanced optical immunoassay.     

Enantioselective antiplatelet actions of nipecotamides

This investigation retrospectively examined changes in marital satisfaction following stroke. The relationship between such changes and other pertinent factors were also examined, including severity of aphasia, knowledge of aphasia, number of months after stroke, and length of the marriage. The subjects were 40 spouses of patients with aphasia grouped according to severity of the aphasia (mild, moderate, severe). Spouses completed two different measures of marital satisfaction--the Marital Satisfaction Scale (MSS) and the Marital Comparison Level Index (MCLI). These measures were completed in both a prestroke (retrospective reporting) and a poststroke format to allow for change to be assessed. In addition, a Knowledge of Aphasia questionnaire was completed by the normal spouses to evaluate their understanding of the disorder of aphasia. There was a significant difference between prestroke and poststroke scores on both the MSS and the MCLI, indicating a lower level of satisfaction following the stroke. The amount of change between prestroke and poststroke MSS and MCLI scores was not related to either number of months poststroke or number of years married. Although there was no relationship between changes in prestroke and poststroke scores on the MCLI and Knowledge of Aphasia scores, there was a significant correlation between changes in these scores on the MSS and Knowledge of Aphasia scores. Hence, the more knowledge spouses had regarding aphasia, the less the negative impact the stroke had on marital satisfaction, as measured by the MSS. Results are discussed in terms of the interdisciplinary treatment needs of aphasic patients and the implications for future investigations.     

浅谈无缝钢管的壁厚偏差

通过探讨、分析无缝钢管壁厚偏差产生的原因，提出了改善钢管壁厚偏差的一些措施，并结合实际生产，得出了比较满意的结果。     

应用于生物医学的光声光谱技术的改进和实验研究

改进的光声光谱归一化技术，避免了普通的分光法归一化光声光谱技术中分束镜以及锁相放大器动态范围的影响和限制，实现宽光谱范围内准确的光谱测量。氙灯光源功率起伏用修正项修正，误差在5％以内，实现各次实验数据的可比性。     

Kinetics of two-step anionic polymerization

This article deals with the kinetics of two-step anionic polymerization by way of a non-steady state method. Several molecular parameters can be evaluated using the formulae developed. A bimodal molecular weight distribution function for the resulting polymer is derived from the set of kinetic differential equations, which is in agreement with the experimental data reported.