三重介质油藏干扰试井压力动态特征

在建立三重介质油藏试井解释模型的基础上，对该类油藏的干扰试井压力动态变化进行了研究；分析了井筒储存、表皮系数、窜流系数以及弹性储容比对观测井井底压力的影响。结果表明，表皮系数对观测井的井底压力没有影响，而井筒储存是否会对观测井井底压力造成影响取决于井筒储存系数的大小以及激动井和观测井之间的距离，窜流系数和弹性储容比对观测井井底压力的影响与单井试井的结果相类似。     

H型丝光沸石催化剂催化甲苯与叔丁醇的烷基化反应

针对合成对叔丁基甲苯传统工艺中存在的缺点,采用环境友好、可重复利用的H型丝光沸石催化剂(以下简称催化剂)进行了甲苯与叔丁醇的烷基化反应,并用X射线衍射和氨程序升温脱附等方法对不同焙烧温度下得到的催化剂的物相结构和酸性质进行了表征,研究了各种反应条件对催化剂的催化性能的影响。实验结果发现,在适宜的操作条件下,即催化剂的焙烧温度823K、反应温度180℃、反应时间3h、初始压力1.0MPa、原料与催化剂的质量比为8、叔丁醇与甲苯的摩尔比为4、溶剂环己烷与甲苯的摩尔比为5时,甲苯转化率达42.73%,叔丁基甲苯的选择性为96.30%,对叔丁基甲苯的选择性为80.37%。     

基于StruCAD-3D的旅大4-2海洋修井机井架设计计算

应用专业结构计算软件StruCAD-3D对旅大4-2海洋修井机井架进行了设计计算,为井架结构的合理布局和选材提供了理论依据。通过计算分析,得知StruCAD-3D可以满足井架设计计算要求,同时还具有风载自动计算功能、单元检查功能和一次完成多种工况计算功能。     

Computing the Average Symbol Error Probability of the MPSK System Having Quadrature Error

When quadrature error exists, the shape of the M‐ary phase shift keying (MPSK) signal constellation becomes skewed‐elliptic. Each MPSK symbol takes on a different symbol error probability (SEP) value. The analytical results presented thus far have been derived from studies which examined the SEP problem assuming that the SEP of each MPSK symbol is equally likely; therefore, those results should not be treated as offering a complete solution. In this letter, we present a new and more complete solution to the SEP problem of MPSK by relaxing the above assumption and finding the expressions for the average as well as individual SEP in the presence of quadrature error.     

Laterally coupled buried heterostructure high-Q ring resonators

All-buried InP-InGaAsP ring resonators laterally coupled to bus waveguides are demonstrated. The buried configurations offer a lower built-in refractive index step along the resonator periphery, which affords enhanced optical coupling coefficients between the waveguides and reduced scattering losses caused by the resonator sidewall imperfections. Very low optical intensity attenuations of 0.4 cm/sup -1/ and coupling-limited quality factors of greater than 10/sup 5/ are observed from 200-/spl mu/m-radii ring resonators. The measured spectral linewidth is as narrow as 0.0145 nm.     

Spectral shape tunable band-rejection filter using a long-period fiber grating with divided coil heaters

We have developed a new type of tunable band rejection filter, which provides high spectral-shaping flexibility in a wide tuning range. The filter consists of a long-period fiber grating (LPFG) with divided coil heaters. Each of the divided coil heaters is controlled individually to adjust a temperature distribution along the LPFG and to modify the spectral shape of the LPFG filter. The tunable band rejection filter is demonstrated to function properly when applied as an erbium-doped fiber amplifier gain-flattening filter.     

设计管理信息系统的提出及其面临的问题

从管理和设计的两个方面出发，通过对现代企业产品设计管理信息系统的探讨，阐明了设计管理信息系统的概念和结构；并对其实施的条件及面临的困难进行了系统的分析。     

Studies on high density polyethylene (HDPE) functionalized by ultraviolet irradiation and its application

The structure and properties of high density polyethylene (HDPE) functionalized by ultraviolet irradiation at different light intensities in air were studied by electron analysis, FTIR spectroscopy, contact angle with water, differential scanning calorimetry and mechanical properties measurement. The results show that oxygen‐containing groups such as C?O, C—O and C(?O)O were introduced onto the molecular chain of HDPE following irradiation, and the rate and efficiency of HDPE functionalization increased with enhancement of irradiation intensity. After irradiation, the melting temperature, contact angle with water and notched impact strength of HDPE decreased, the degree of crystallinity increased, and their variation amplitude increased with irradiation intensity. Compared with HDPE, the yield strength of HDPE irradiated at lower light intensity (32 W m^?2 and 45 W m^?2) increases monotonically with irradiation time, and the yield strength of HDPE irradiated at higher light intensity (78 W m^?2) increases up to 48 h and then decreased with further increase in irradiation time. The irradiated HDPE behaved as a compatibilizer in HDPE/polycarbonate (PC) blends, and the interface bonding between HDPE and PC was ameliorated. After adding 20 wt% HDPE irradiated at 78 W m^?2 irradiation intensity for 24 h to HDPE/PC blends, the tensile yield strength and notched Izod impact strength of the blend were increased from 26.3 MPa and 51 J m^?1 to 30.2 MPa and 158 J m^?1, respectively. Copyright © 2003 Society of Chemical Industry     

改性蜂窝陶瓷催化臭氧氧化净水效能中试研究

通过中试考察了改性蜂窝陶瓷催化臭氧氧化(催化氧化)—活性炭过滤的净水效果,并与臭氧—活性炭工艺进行比较。试验条件下蜂窝陶瓷催化剂在静态和动态条件下均不会促进气体向水中的传质;静态条件下催化氧化对水中有机物的去除效率比臭氧单独氧化高;动态试验中,催化氧化对UV254的去除率高于臭氧氧化,但对TOC的去除没有优势,与臭氧氧化相比催化氧化有利于后续活性炭对有机物的去除。GC/MS测定表明,催化氧化及其后续活性炭出水中半挥发性有机物种类分别比臭氧单独氧化少9%和32%。经Ames试验发现,两种氧化及其后续活性炭处理后水的致突变活性均有微小增加。     

FCC汽油叠合生产柴油的研究——(Ⅰ)叠合催化剂的研制

采用中孔γ-Al2O3为载体，以非贵金属Ni为活性金属组分，以金属Sn为助剂组分，制备了FCC汽油叠合生产柴油的催化剂。在实验室小型连续流动式固定床装置上，以FCC汽油为原料，考察了主活性金属负载量、助催化剂、催化剂制备条件对催化剂性能的影响。研究结果表明，在活性金属Ni质量分数为8％，助催化剂Sn质量分数为1％，浸渍时间6h，焙烧温度500℃，焙烧时间4h的条件下，制备的叠合催化剂的催化性能最好。并对催化剂进行了1500h的稳定性试验和再生性能考察，结果表明该叠合催化剂具有良好的稳定性和再生性能。