Low-noise 0.78 μm-band laser diode unit containing Faradayrotator

A small, low-noise 0.78 μm-band laser diode unit, containing a Faraday rotator which suppresses optical feedback, was developed. Stable low-noise characteristics were realised within the 3 mW to 10 mW output power. Greater than 40 dB signal/noise ratio was obtained in an optical video disc with this unit     

Determining the minimum iteration period of an algorithm

Digital signal processing algorithms are repetitive in nature. These algorithms are described by iterative data-flow graphs where nodes represent computations and edges represent communications. For all data-flow graphs, there exists a fundamental lower bound on the iteration period referred to as theiteration bound. Determining the iteration bound for signal processing algorithms described by iterative data-flow graphs is an important problem. In this paper we review two existing algorithms for determination of the iteration bound. Then we propose another novel method based on theminimum cycle mean algorithm to determine the iteration bound with a lower polynomial time complexity than the two existing techniques. It is convenient to represent many multi-rate signal processing algorithms by multi-rate data-flow graphs. The iteration bound of a multi-rate data-flow graph (MRDFG) can be determined by considering the single-rate data-flow graph (SRDFG) equivalent of the MRDFG. However, the equivalent single-rate data-flow graph contains many redundant nodes and edges. The iteration bound of the MRDFG can be determined faster if these redundancies in the equivalent SRDFG are first removed. A previous approach has considered elimination of edge redundancy. In this paper we present an approach to eliminatenode redundancy in the MRDFG. We combine elimination of node and edge redundancies to propose a novel algorithm for faster determination of the iteration bound of the MRDFG.This research was supported by the Advanced Research Projects Agency and monitored by Wright—Patterson AFB under contract number F33615-93-C-1309.     

Effects of amino compounds on the formation of γ-tocopherol reducing dimers in autoxidizing linoleate

The effects of various amino compounds trimethylamine oxide (TMAO), tri-n-octylamine (TOA), phosphatidyl choline (PC), and phosphatidyl ethanolamine (PE) on the oxidative decomposition of γ-tocopherol (γ-Toc) and on the formation of its reducing dimers were investigated during the autoxidation of methyl linoleate (ML). In general, γ-Toc diphenyl ether dimer (γ-TED) was formed in preference to two atropisomers of γ-Toc biphenyl dimers [γ-TBD(H) and (L)] in autoxidizing ML. This relationship, however, was reversed when TMAO was added. As the presence of TOA, PC, or PE did not promote the formation of γ-TBD, the preferential formation of γ-TBD was believed to be based on the interaction between TMAO and oxidation products formed from γ-Toc. Effects of TMAO and TOA on the interconversion of γ-Toc reducing dimers were investigated. γ-TED was found to be converted into γ-Toc and γ-TBD(L) in autoxidizing ML. But γ-TBD(H) could not be detected, and the amount of γ-TBD(L) formed was very small. γ-TBD(H) and (L) were formed from their respective atropisomers. In this case, the formations of γ-Toc and γ-TED could not be detected. Therefore, it was concluded that the conversion of γ-TED into γ-TBD and vice versa can be neglected in any event.     

Utilization of sludge in building material.

Several thermal solidification processes have been developed mainly in Japan. They are lightweight aggregates, brick, interlocking tile, char, and slag. A full-scale plant of them has been successfully operated for more than 10 years. The quality of the end products is better than the traditional ones. They are all substitutive to existing ones. The Japanese experience proves that all the processes are technically feasible, but not economically. Their manufacturing cost is always higher than market price. In addition, they consume large amounts of energy. However, if they are identified for a process of sludge disposal, all of them are worth considering for a big city where there is no place for the sludge to go. The end products can be reused inside the city. A new alternative is "Portland cement". A Portland cement manufacturer accepts sewage sludge, if being paid some amount of money. An average payment is US$100 each 1,000 kg of ash or sludge cake. The Portland cement manufacturer accepts either cake or ash at the same price. It is about 50 to 30% of the energy cost of thermal solidification. The question is which is the better, dewatered cake or incinerated ash, for the Portland cement application. The answer is "it depends on the distance between the sewage plant and the Portland cement plant."     

Microdosimetry of neutron field for boron neutron capture therapy at Kyoto university reactor

Microdosimetric single event spectrum in a human body simulated by an acrylic phantom has been measured for the clinical BNCT field at the Kyoto University Reactor (KUR). The recoil particles resulting from the initial reaction and subsequent interactions, namely protons, electrons, alpha particles and carbon nuclei are identified in the microdosimetric spectrum. The relative contributions to the neutron dose from proton, alpha particles and carbon are estimated to be about 0.9, 0.07 and 0.3, respectively, four depths between 5 and 41 mm. We estimate that the dose averaged lineal energy, yD decreased with depth from 64 to 46 keV microm(-1). Relative biological effectiveness (RBE) of this neutron field using a response function for the microdosimetric spectrum was estimated to decrease from 3.6 to 2.9 with increasing depth.     

Grazing exit electron probe microanalysis of submicrometer inclusions in metallic materials

Grazing exit electron probe microanalysis (GE-EPMA) is a new method of EPMA in which characteristic X-rays emitted from only near-surface regions of a specimen are detected at extremely low exit angles near 0 degrees (the grazing exit condition). This technique requires the analytical objects exist on a flat surface. Therefore, the GE-EPMA analysis has been used only for the analysis of particles or a thin film on a flat substrate so that there were only few applications for practical analysis. As a new application, we have carried out GE-EPMA analysis of approximately 0.2-microm inclusions on stainless steel, which appeared to be a projection on the specimen surface with chemical etching. The GE-EPMA quantitative results were in excellent agreement with those of inclusions that were extracted from the stainless steel and analyzed by EPMA with conventional exit condition (30 degrees). This method could be, therefore, applied to the analysis of the submicrometer inclusion in a wide variety of metallic materials if the inclusion appears to be a projection with chemical etching treatment.     

On-demand droplet spotter for preparing pico- to femtoliter droplets on surfaces

A droplet spotter for on-demand generation of pico- to femtoliter droplets was developed to meet the requirement for high-density spotting of chemicals on a surface. Our droplet spotter involves applying a approximately 1000-V and approximately 10-ms pulse voltage to the tip of a capillary tube (o.d. approximately 18 microns; i.d. approximately 11 microns) supplied with water or a dye solution. The capability of the spotter was demonstrated by preparing a microarray of dye molecules. The microarray was prepared by spotting approximately 30-fL droplets of a dye solution on a surface at the density of one spot per 20 x 20 micron 2.