Bioconversion of 1-adamantanol to 1,3-adamantanediol using Streptomyces sp. SA8 oxidation system

To efficiently produce 1,3-adamantanediol (1,3-ad(OH)₂) from 1-adamantanol (1-adOH), our stocks of culture strains and soil microorganisms were surveyed for hydroxylation activity towards 1-adOH. Among them, the soil actinomycete SA8 showing the highest hydroxylation activity was identified as Streptomyces sp. based on 16S ribosomal DNA sequence analysis. The reaction products were purified by silica gel column chromatography, and from NMR and MS analyses, they were identified as 1,3-ad(OH)₂ and 1,4-ad(OH)₂. Streptomyces sp. SA8 produced 5.9 g l^? 1 1,3-ad(OH)₂from 6.2 g l^? 1 1-adOH in culture broth after 120 h at 25 °C. Using resting cells, 2.3 g l^? 1 1,3-ad(OH)₂ was produced after 96 h of incubation at a 69% conversion rate. In both cases, 1,4-ad(OH)₂ was formed as a byproduct at a rate of about 15%. Strain SA8 also hydroxylated 2-adamantanol and 2-methyl-2-adamantanol.     

Evaluation of cost reduction potential for 1 kW class SOFC stack production: Implications for SOFC technology scenario

Recently, a commercial version of a residential solid oxide fuel cell (SOFC) system with a flat tubular cell has been developed. However, the system cost still remains very high, which is a barrier to its widespread use. In this study, the potential for cost reductions in SOFC stack production was investigated in order to contribute to the viability of the widespread use of such residential SOFC systems in future. A cost analysis of 700 W SOFC stack production based on a process integration modeling was conducted. The present bottom–up approach enabled us to perform a sensitivity analysis with a variety of parameters in terms of cell design, the production process and cell performance. This allowed us to investigate the effects of these factors on the production cost, thereby revealing the quantitative impact of each technological improvement on the cost reduction potential. The present analysis also revealed innovation pathways which could result in technology scenarios where residential SOFC systems could reach a break-even point in comparison with the baseload electricity cost. The analysis of the cost reduction potential presented here provides a useful viewpoint for developing a research strategy for state-of-the-art SOFC technology.     

An analysis of the length of hospital stay for cataract patients in Japan using the discrete-type proportional hazard model

We analyze the length of hospital stays of patients hospitalized for cataract and related diseases (Diagnosis Related Groups (DRG) 2041) in Japan, utilizing the data pertaining to 3436 patients on whom one-eye lens operations are performed. We use the discrete-type proportional hazard model to analyze variables that may affect the length of stay.     

Thermoreversible behavior of κ-carrageenan and its apatite-forming ability in simulated body fluid

Osteoconductive materials with self-setting ability have received much attention because their properties allow developing injectable materials for bone defects. Thermosensitive hydrogel with ability of bone-like apatite formation in a body environment is a candidate of injectable bone fillers with osteoconductivity because the apatite formation on materials is an essential to show osteoconduction. The present study focused on the development of a thermosensitive hydrogel through modifications of the sulphonic groups of the polysaccharide, κ-carrageenan, with potassium chloride (KCl) and calcium chloride (CaCl₂). We found that the gelation temperature of κ-carrageenan solutions increased with increasing amounts of K⁺ ions. Apatite formation was observed on the gel after exposure to simulated body fluid for 0.5 day when the gel was prepared with a molar ratio of Ca²⁺/sulfonic groups = 1.5. These results indicate that a thermosensitive κ-carrageenan hydrogel with apatite-forming ability was obtained through the incorporation of K⁺ and Ca²⁺ ions into the solution.     

Analysis of polymer electrolyte fuel cell performance by electrode polarization model

For development of polymer electrolyte fuel cell (PEFC) lifetime estimation method, a high accuracy PEFC electrode polarization model is required. An electrode polarization model which was previously proposed was verified. However, accuracy of the electrode polarization model was not enough to estimate PEFC performance under various conditions. A new high accuracy PEFC electrode polarization model has been developed based on electrochemical consideration and data observed at elevated pressures. In the cathode polarization model, effects of O₂ diffusion and H₂O plugging have to be considered to obtain high accuracy for long-term operation. In addition, PEFC performance degradation was analyzed by the electrode polarization model. Main factors of PEFC performance degradation are OCV drop, the cathodic activation polarization, voltage drops by O₂ diffusion and H₂O plugging.     

Microstructure and properties of alumina-silicon carbide nanocomposites fabricated by pressureless sintering and post hot-isostatic pressing

Al₂O₃/5%SiC nanocomposites were fabricated by pressureless sintering using MgO as a sintering aid and then post hot-isostatic pressed (HIP), which can subsequently break through the disadvantage of hot-pressing process. The MgO additive was able to promote the densification of the composites, but could not induce the grain growth of Al₂O₃ matrix due to the grain growth inhibition by nano-sized SiC particles. After HIP treatment, Al₂O₃/SiC nanocomposites achieved full densification and homogeneous distribution of nano-sized SiC particles. Moreover, the fracture morphology of HIP treated specimens was identical with that of the hot-pressed Al₂O₃/SiC nanocomposites showing complete transgranular fracture. Consequently, high fracture strength of 1 GPa was achieved for the Al₂O₃/5%SiC nanocomposites by pressureless sintering and post HIP process.     

Mercury and selenium concentrations in the internal organs of toothed whales and dolphins marketed for human consumption in Japan

Small cetaceans (toothed whales odontoceti and dolphins delphinidae) have been traditionally hunted along the coast of Japan and fresh red meat and blubber, as well as boiled internal organs such as liver, kidney, lung and small intestine, are still being sold for human consumption. We surveyed mercury contamination in boiled liver, kidney and lung products marketed in Japan between 1999-2001. The average +/- S.D. of total mercury (T-Hg) was 370 +/- 525 (range: 7.60 approximately 1980, n = 26) microg/g in liver, 40.5 +/- 48.5 (7.30-95.1, n = 15) microg/g in kidney and 42.8 +/- 43.8 (2.10-79.6, n = 23) microg/g in lung. A high correlation was observed between T-Hg and selenium (Se) concentrations in these organs, supporting the formation of a Hg-Se complex. The formation of a Hg-Se complex probably contribute to the detoxification of Hg for cetaceans and allows a very large accumulation of Hg in livers. The provisional permitted level of T-Hg in marine foods set by the Japanese Ministry of Health and Welfare is 0.4 microg/ g, and the provisional permitted weekly intake (PTWI) set by WHO is 5 microg/kg bw/week. The maximal T-Hg detected in boiled liver (1,980 microg/g) exceeds the permitted level by approximately 5,000 times and the consumption of only 0.15 g of liver exceeds the PTWI of 60 kg of body weight of the consumer, suggesting the possibility of an acute intoxication by T-Hg even after a single consumption of the product.     

Guided-mode resonant grating filter with an antireflection structured surface

We describe a new structure of guided-mode resonant grating (GMRG) filters with low sideband reflectance. This GMRG filter consists of a high-index thin film on an antireflective structured surface called "moth-eye structure." Since the high-index film undulates along the surface structure, the film acts as a modulated optical waveguide. An incident light wave satisfying a resonant condition is reflected by the GMRG filter, and nonresonant light waves pass through the filter. This GMRG filter is valid for reducing reflection of nonresonant light waves in a wide spectral range. The resonant reflection of this new filter was investigated by numerical calculation based on an electromagnetic grating analysis. In the case of a triangular antireflective surface structure whose thickness is 2x greater than its period, the sideband reflectance for nonresonant light waves was lower than 0.5% for TM-polarized light in a wide range of wavelengths.     

Model-less visual servoing using modified simplex optimization

This article describes a robot positioning task with respect to a static target by visual servoing. The vision system is uncalibrated, and the kinematic model of the robot may be totally unknown. The displacements of the robot at joint level are generated in real time in order to minimize the objective function. The objective function includes the quadratic error between the current and the desired target images. A simplex method is used to minimize the objective function, and a Newton-like method is also used near convergence. We successfully validated this method with simulations under the graphic library OpenGL. This work was presented in part at the 10th International Symposium on Artificial Life and Robotics, Oita, Japan, February 4–6, 2005