Comparison of dynamic headspace and simultaneous distillation extraction techniques used for the analysis of the volatile components in three European PDO ewes’ milk cheeses

This preliminary study aims to compare two different extraction and concentration methods often used for the gas chromatographic analysis of volatile components in food to determine the advantages and drawbacks of both for future routine investigation of PDO (protected designation origin) ewes’ milk cheeses. Roncal, Pecorino Sardo and Fiore Sardo were investigated at different ripening stages. The dynamic headspace technique using a Purge & Trap device (DHS) makes it possible to extract more highly volatile compounds than the simultaneous distillation extraction (SDE) method. Consequently, the latter is more efficient for extracting low-volatile components such as phenols, free fatty acids, lactones and longer-chain aldehydes, ketones, alcohols and esters. These two extraction methods are therefore complementary.     

Optimisation of cake fat quantity and composition using response surface methodology

The influence of fat quantity and composition on the characteristics of a chemically leavened baked product was investigated, applying a central composite design combined with response surface methodology. Fats were blends of palm oil and palm olein with different slip melting points (from 36.3 to 11.3 °C, in dependence of increasing olein content). Fat content (from 5.3% to 30.7% on batter) and percentage of olein in the fat blend (from 42.7% to 92.2%) were varied. The increase of fat quantity enhanced cake softness, while lowering the volume; higher olein contents also decreased cake firmness. An optimised formulation containing 19.7% fat with 92% olein in the fat blend and showing good structural properties, comparable to those of a 18% butter reference cake, was identified. The optimised and the butter cake showed specific volume of 2.25 and 2.23 cm³ g^?1, respectively, and load at 25% strain of 7.68 and 5.63 N. These results demonstrated the possibility to replace butter with a liquid vegetable fat blend, thus increasing unsaturated fat content and reducing total cholesterol in the product.     

Electro-tactile device for material texture simulation

This paper deals with the simulation of material texture by means of electro-tactile stimuli, which directly derive from real material properties. The research presents a novel tactile display by its hardware and software system architecture and the elaboration procedure to generate the stimulating signals, and validates the adopted simulation strategy by experimental testing. The tactile system elaborates data from scans of real material samples and generates electrical stimuli to reproduce roughness and texture coarseness sensations. It also adds a coherent sound feedback to improve the realism of the simulation. The research defines also an experimental protocol based on the theory of Psychophysics to carry out system calibration and tests with users. The scope is to validate the proposed tactile system as a new tool for material simulation, which can be adopted for material virtual prototyping in several fields (product design, textile and clothing, gaming and entertainment, virtual museum, rehabilitation, etc.). Experimentations have been carried out to measure the users’ response to our different material classes (wood, paper, rubber and textile fabric). Experimental results concern how good the adopted simulation approach is and the analysis of the human tactile perception simulated by the system. Main findings relate to the system performance and the users’ response in terms of signal recognition and material class discrimination.     

Elemental and mineral characterisation of Coastal Antarctic Aerosols in snow using PIXE and SEM-EDAX

The chemical constituents of snow from a 3 m pit sampled at a coastal Antarctic site were characterised by means of PIXE and SEM-EDAX. Oxygen isotope dating revealed that the pit spanned an 8-year period, from 1986 to 1994. Concentrations measured by PIXE ranged from less than 1 ng g⁻¹ of H₂O for Cu, and Zn to several tens of ng g⁻¹ for Si, S and Cl. The major elements found were Si, S, Al, and Na, which contributed more than 75% of the element loading. Snow layers with elevated Cl concentration were regularly found along the pit. The mineralogy of the insoluble particles determined by SEM-EDAX analyses showed that quartz, plagioclase and clays were the prevalent minerals. The proportion of each element in the insoluble phase was comparable with that previously found in similar studies.     

Minimal free resolutions of some configurations of fat lines

In this paper we compute the minimal free resolution and then the Hilbert function of a \(m\) -homogeneous fat complete grid in \(\mathbb {P}^3_\mathbf {K}\) . This proves a conjecture about the minimal free resolution of these configurations of lines.     

Palladium nanoparticle deposition via precipitation: a new method to functionalize macroporous silicon

We present an original two-step method for the deposition via precipitation of Pd nanoparticles into macroporous silicon. The method consists in immersing a macroporous silicon sample in a PdCl₂/DMSO solution and then in annealing the sample at a high temperature. The impact of composition and concentration of the solution and annealing time on the nanoparticle characteristics is investigated. This method is compared to electroless plating, which is a standard method for the deposition of Pd nanoparticles. Scanning electron microscopy and computerized image processing are used to evaluate size, shape, surface density and deposition homogeneity of the Pd nanoparticles on the pore walls. Energy-dispersive x-ray spectroscopy (EDX) and x-ray photoelectron spectroscopy (XPS) analyses are used to evaluate the composition of the deposited nanoparticles. In contrast to electroless plating, the proposed method leads to homogeneously distributed Pd nanoparticles along the macropores depth with a surface density that increases proportionally with the PdCl₂ concentration. Moreover EDX and XPS analysis showed that the nanoparticles are composed of Pd in its metallic state, while nanoparticles deposited by electroless plating are composed of both metallic Pd and PdO_x.     

Supercritical carbon dioxide-treated blood orange juice as a new product in the fresh fruit juice market

The work described here deals with the effectiveness of using high-pressure carbon dioxide treatment (HPCD) to stabilise freshly squeezed blood orange juice. Technical planning of a continuous high-pressure supercritical carbon dioxide pilot system, suitable for development on an industrial scale, was carried out in our lab. To determine the optimal operating conditions (temperature, pressure, and CO₂/juice ratio), three different experimental trials were carried out. The first trial was conducted at 230 bar, 36 ± 1 °C, 5.08 L/h juice flow rate, and 3.91 L/h CO₂ flow rate, corresponding to a g_CO2/g_juice ratio of 0.770. The second trial utilised the same conditions except that the operative pressure was reduced (130 bar). The third trial was carried out at 130 bar, 36 ± 1 °C, 5.08 L/h juice flow rate, 1.96 L/h CO₂ flow rate, corresponding to a 0.385 g_CO2/g_juice ratio. The effects of processing were evaluated by determining physicochemical, antioxidant, and microbiological parameters of the treated juices. In addition, once the best operative parameters had been determined, physicochemical, antioxidant, microbiological and sensory evaluation of fresh blood orange juice stabilised by HPCD treatment was carried out during refrigerated storage of juices at 4 ± 1 °C for thirty days. The results showed that HPCD treatment cannot be considered as an alternative to traditional thermal methods but as a new mild technology for producing a stabilised blood orange juice with a shelf-life of 20 days.Industrial relevanceBlood oranges are the main cultivated varieties of Citrus sinensis (L.) Osbeck in Italy. Freshly squeezed blood orange juice exert a high antiradical and antioxidant activity, due to its rich phenolic profile, but its preservation is usually assured by thermal treatment which affects its nutritional and sensory value. In this study we proposed a “milder” continuous HPCD process suitable for implementation on an industrial scale. The HPCD stabilised juice retains its physicochemical, antioxidant, and sensory properties and could be placed within a new retail framework, namely, that of fresh juices with a shelf-life of 20 days.     

Detection of Germline Variants in 450 Breast/Ovarian Cancer Families with a Multi-Gene Panel Including Coding and Regulatory Regions

With the progress of sequencing technologies, an ever-increasing number of variants of unknown functional and clinical significance (VUS) have been identified in both coding and non-coding regions of the main Breast Cancer (BC) predisposition genes. The aim of this study is to identify a mutational profile of coding and intron-exon junction regions of 12 moderate penetrance genes (ATM, BRIP1, CDH1, CHEK2, NBN, PALB2, PTEN, RAD50, RAD51C, RAD51D, STK11, TP53) in a cohort of 450 Italian patients with Hereditary Breast/Ovarian Cancer Syndrome, wild type for germline mutation in BRCA1/2 genes. The analysis was extended to 5′UTR and 3′UTR of all the genes listed above and to the BRCA1 and BRCA2 known regulatory regions in a subset of 120 patients. The screening was performed through NGS target resequencing on the Illumina platform MiSeq. 8.7% of the patients analyzed is carriers of class 5/4 coding variants in the ATM (3.6%), BRIP1 (1.6%), CHEK2 (1.8%), PALB2 (0.7%), RAD51C (0.4%), RAD51D (0.4%), and TP53 (0.2%) genes, while variants of uncertain pathological significance (VUSs)/class 3 were identified in 9.1% of the samples. In intron-exon junctions and in regulatory regions, variants were detected respectively in 5.1% and in 32.5% of the cases analyzed. The average age of disease onset of 44.4 in non-coding variant carriers is absolutely similar to the average age of disease onset in coding variant carriers for each proband’s group with the same cancer type. Furthermore, there is not a statistically significant difference in the proportion of cases with a tumor onset under age of 40 between the two groups, but the presence of multiple non-coding variants in the same patient may affect the aggressiveness of the tumor and it is worth underlining that 25% of patients with an aggressive tumor are carriers of a PTEN 3′UTR-variant. This data provides initial information on how important it might be to extend mutational screening to the regulatory regions in clinical practice.     

Trace elements bioaccumulation in Porcellionides pruinosus (Brandt, 1833) and related biomarkers of exposure

In the last years, the increase of anthropogenic activities has led to a progressive pollution of ecosystems. Oniscidean isopods are a group of terrestrial animals known as excellent bio‐indicators and bio‐accumulators, because of their capacity to accumulate contaminants and to implement appropriate strategies of detoxification. For this study, we collected Porcellionides pruinosus from two different sites in the Corinth region (Greece), a polluted site and a control site, to assess the heavy metal pollution status. We conducted an inductively coupled plasma mass spectrometry (ICP‐MS) analysis for the detection of trace elements in animals' hepatopancreas and soil; we performed also immunohistochemistry for detection of metallothioneins 1 (MT1) and heat shock protein 70 (HSP70s). The results suggest a great capacity of the species in trace elements bioaccumulation and the high degree of pollution of the area near Agioi Theodoroi where the metal pollution index (MPI) is threefolds higher than the control site, due to the presence of significantly higher concentration of arsenic, cadmium, cobalt, chromium, manganese, molybdenum, and lead found in hepatopancreas and soil. The environmental stress is confirmed by the expression of the relative biomarkers of exposure MT1 and HSP70. Our study, with a multimarker approach, consents getting a complete analysis of environmental quality and the effect of pollution on organisms and shows for the first time the heavy metals contamination status in certain Greece area. Furthermore, P. pruinosus proved to be an appropriate indicator of pollution in terrestrial ecosystems.     

Highly Selective and Potent Human β-Secretase 2 (BACE2) Inhibitors against Type 2 Diabetes: Design,Synthesis, X-ray Structure and Structure–Activity Relationship Studies

Herein we present the design, synthesis, and biological evaluation of potent and highly selective β-secretase 2 (memapsin 1, beta-site amyloid precursor protein cleaving enzyme 2, or BACE 2) inhibitors. BACE2 has been recognized as an exciting new target for type 2 diabetes. The X-ray structure of BACE1 bound to inhibitor 2 a {N³-[(1S,2R)-1-benzyl-2-hydroxy-3-[[(1S,2S)-2-hydroxy-1-(isobutylcarbamoyl)propyl]amino]propyl]-5-[methyl(methylsulfonyl)amino]-N¹-[(1R)-1-phenylpropyl]benzene-1,3-dicarboxamide} containing a hydroxyethylamine isostere was determined. Based on this structure, a computational docking study was performed which led to inhibitor 2 a -bound BACE2 models. These were used to optimize the potency and selectivity of inhibitors. A systematic structure–activity relationship study led to the identification of determinants of the inhibitors’ potency and selectivity toward the BACE2 enzyme. Inhibitors 2 d [N³-[(1S,2R)-1-benzyl-2-hydroxy-3-[[(1S,2S)-2-hydroxy-1-(isobutylcarbamoyl)pentyl]amino]propyl]-N¹-methyl-N¹-[(1R)-1-phenylpropyl]benzene-1,3-dicarboxamide; K_i=0.031 nm , selectivity over BACE1: ≈174 000-fold] and 3 l [N¹-((2S,3R)-3-hydroxy-1-phenyl-4-((3-(trifluoromethyl)benzyl)amino)butan-2-yl)-N³,5-dimethyl-N³-((R)-1-phenylethyl)isophthalamide; K_i=1.6 nm , selectivity over BACE1: >500-fold] displayed outstanding potency and selectivity. Inhibitor 3 l is nonpeptide in nature and may pave the way to the development of a new class of potent and selective BACE2 inhibitors with clinical potential.