Association between antiinflammatory cytokine,IL‐10, and sleep quality in patients on maintenance hemodialysis

Elevated proinflammatory cytokines have been attributed to poor sleep quality in patients receiving hemodialysis. This is the first investigation about the relationship between sleep quality and circulating levels of antiinflammatory markers in these patients. A total of 72 patients who were receiving maintenance hemodialysis were enrolled in this cross‐sectional study. The Pittsburgh Sleep Quality Index (PSQI) was used to measure sleep quality. Patients were divided into two groups: good sleepers (PSQI score < 5) and poor sleepers (PSQI score ≥ 5). Assessments were made for serum biochemical parameters (albumin, parathyroid hormone), inflammatory (interleukin [IL]‐6, tumor necrosis factor‐alpha [TNF‐α], and high‐sensitivity c‐reactive protein [hs‐CRP] ) and antiinflammatory (IL‐10) markers. Fifty‐four patients (75%) were classified as poor sleepers. Poor sleepers showed significantly lower levels of serum IL‐10 and higher serum triglyceride and parathyroid hormone concentrations. These patients were more likely to have more comorbidities. The global PSQI score was significantly correlated with serum IL‐10 (p = 0.03) and triglyceride levels (p = 0.01). Multivariate logistic regression analysis showed a direct correlation between PSQI and having comorbidities (p = 0.011, odds ratio [OR] = 3.918; confidence interval 95% [CI] = 2.742–19.031), between PSQI and serum triglyceride (p = 0.027, OR = 1.027 [95% CI = 1.007–1.048] ), and an inverse correlation between PSQI and serum IL‐10 level (p = 0.021, OR = 0.424 [95% CI = 0.195–0.922]). Reduced circulating levels of the antiinflammatory cytokine IL‐10 were significantly associated with poor sleep quality in hemodialysis patients. Factors including serum IL‐10 and triglyceride concentrations and having comorbidities may predict patients prone to poor sleep quality.     

Amide–acid functional SiO2 nanocomposites based on new semi‐crystalline poly(ether‐sulfone‐amide): thermal,combustion and mechanical studies

New amide–acid functional SiO₂ nanoparticle (FSNP)‐reinforced semi‐crystalline aliphatic–aromatic poly(ether‐sulfone‐amide) (PESA) was synthesized using a solution method in dimethylformamide. The surfaces of SiO₂ nanoparticles were functionalized with phthalic anhydride, and subsequently PESA was synthesized using direct polymerization with good yield and desired molar mass. PESA / SiO₂ nanocomposites (PSNCs) were prepared with three different contents of FSNP and the morphology and mechanical, thermal and combustion properties of the PSNCs were studied. The results of X‐ray diffraction, field‐emission scanning electron microscopy and transmission electron microscopy showed a uniform dispersion for FSNP in the PESA matrix. According to the results of mechanical tests, the tensile strength and the Young's modulus of PESA were enhanced by FSNP loading. Thermogravimetric analysis and derivative thermogravimetry results showed a substantial improvement in thermal properties of PESA. The temperature at 5% mass loss was increased from 371.7 to 395.8 °C for the PSNC containing 8 mass% of FSNP, as well as the char yield being enhanced greatly, which was about 30% higher than that of neat PESA. Significant improvements in combustion properties were observed for PSNCs from microscale combustion calorimetry. The peak heat release rate showed an obvious improvement and decreased by about 57% compared to that of neat PESA on 8 mass% loading of FSNP. © 2016 Society of Chemical Industry     

Novel high strength Al-10.5Si-3.4Cu-0.2Mg alloy produced through two-stage solution heat treatment

Mechanical properties of aluminum-silicon-copper alloys are enhanced through precipitation hardening. The response of these alloys to age-hardening is very slow. To overcome this problem, 0.2, 0.4 and 0.7 wt.% magnesium were added to Al-10.5Si-3.4Cu alloy. The new alloys were subjected to two types of precipitation hardening processes different in the solutionizing stage. The results showed that the presence of various amounts of magnesium in the composition of this alloy accelerates the response to ageing treatments, increasing the hardness and strength. Higher mechanical properties can be achieved when the alloys were subjected to a two-stage solution heat treatment. It is found that Al-10.5Si-3.4Cu alloy containing 0.2 wt.% Mg treated through a two-stage solution process, has optimum properties with ultimate tensile strength of 383.9 MPa, yield strength of 289.7 MPa and elongation of 3.97%, and can be used as a substitute for a large number of aluminum castings which need high strength and excellent castability.     

Online Droop Tuning of a Multi-DG Microgrid Using Cuckoo Search Algorithm

This article presents an intelligent strategy to achieve appropriate real power sharing among distributed generators in a microgrid. The presented strategy employs two droop-based control methods and automatically adjusts their parameters. The first method is unit power control, which has specifications similar to the conventional droop method, and the second is feeder flow control, showing significant characteristics in both grid-connected and islanded modes operation of a microgrid. A combination of unit power control and feeder flow control methods is used for a multi-distributed generator microgrid. The microgrid operation mode passes from the grid-connected to the islanded through a transition. A new evolutionary algorithm called cuckoo search is employed to coordinate the power management of distributed generators within an on-line droop tuning. In comparison to the predecessor evolutionary algorithms, the cuckoo search algorithm represents more effective random processes with fewer parameters. Using the proposed control strategy, while the distributed generators contribute to load demand provision based on their rated powers, their powers are optimized in terms of overshoot and settling time. Digital time-domain simulation studies are carried out in the MATLAB/SIMULINK (The MathWorks, Natick, Massachusetts, USA) environment to verify the performance of the proposed control system.     

A new arrangement of Z‐source AC–AC converter and its closed‐loop control system

In this study, a Z‐source alternating current‐to‐alternating current (AC–AC) converter with a specific topology, which can provide both buck and boost modes, is investigated. This converter, which can be implemented easily, utilizes only two switches with complemented commands. A comparison between the Z‐source AC–AC converter and a conventional thyristor voltage controlled one is presented here, and it shows that in the most areas, the Z‐source converter provides a faster response and lower total harmonic distortion of the output currents than the conventional one. Moreover, the Z‐source converter is also extended to the multiphase systems. In addition, a new arrangement of this converter is proposed here to remove the isolated single‐phase sources. Furthermore, an open‐loop method is proposed for soft‐starting applications. Finally, a closed‐loop control system is also suggested for a three‐phase Z‐source converter to soft start and control the speed of an induction motor. Computer simulations show the validity and effectiveness of the proposed schemes. Copyright © 2014 John Wiley & Sons, Ltd.     

Opportunistic interference management: a new approach for multiantenna downlink cellular networks

A new approach for multiantenna broadcast channels in cellular networks based on multiuser diversity concept is introduced. The technique called opportunistic interference management achieves dirty paper coding capacity asymptotically with minimum feedback required. When there are K antennas at the base station with M mobile users in the cell, the proposed technique only requires K integer numbers related to channel state information between mobile users and base station. The encoding and decoding complexity of this scheme is the same as that of point‐to‐point communications, which makes the implementation of this technique easy. An antenna selection scheme is proposed at the base station to reduce the minimum required mobile users significantly at the expense of reasonable increase in feedback. In order to guarantee fairness, a new algorithm is presented that incorporates opportunistic interference management into existing Global System for Mobile communications (GSM) standard. Copyright © 2014 John Wiley & Sons, Ltd.     

A comparative study of CO<Subscript>2</Subscript> and CH<Subscript>4</Subscript> adsorption using activated carbon prepared from pine cone by phosphoric acid activation

Adsorption of pure carbon dioxide and methane was examined on activated carbon prepared from pine cone by chemical activation with H₃PO₄ to determine the potential for the separation of CO₂ from CH₄. The prepared adsorbent was characterized by N₂ adsorption-desorption, elemental analysis, FTIR, SEM and TEM. The equilibrium adsorption of CO₂ and CH₄ on AC was determined at 298, 308 and 318 K and pressure range of 1–16 bar. The experimental data of both gases were analyzed using Langmuir and Freundlich models. For CO₂, the Langmuir isotherm presented a perfect fit, whereas the isotherm of CH₄ was well described by Freundlich model. The selectivity of CO₂ over CH₄ by AC (CO₂: CH₄=50: 50, 298K, 5 bar), predicted by ideal adsorbed solution theory (IAST) model, was achieved at 1.68. These data demonstrated that pine cone-based AC prepared in this study can be successfully used in separation of CO₂ from CH₄.     

A modified thermodynamic insight to deliquescence of a void‐containing nanocrystal confirmed by MD simulation

Existence of voids in crystalline structures can affect their physical and chemical properties considerably. When the size of the crystal reaches to nanoscale, experimental determination of its void fraction is difficult. In this work, a molecular dynamics approach is introduced to find equilibrium void fractions of a simple cubic (CsCl) and fcc (KCl) nanocrystals by determination of their deliquescence relative humidity (DRH) for different sizes and void fractions and extrapolation of the results to the bulk limit. To confirm the simulation results, the size dependency of DRH to the nanoparticle size was studied thermodynamically by inclusion of size‐dependent density of water nanodroplet which leads to a simple homographic equation. This method proposes the equilibrium void percents of CsCl and KCl nanoparticles to be 10 and 15%, respectively, which are obtained by extrapolation of the results to the bulk limit. The success of obtained Möbius function was also confirmed by fitting it to experimental data for deliquescence of NaCl nanoparticles which implies the importance of considering density of water nanodroplet as a size dependent quantity. Also, using the mentioned thermodynamic approach, void dependency of deliquescence for the nanoparticles was found to be as a quasi‐linear trend which is compatible with the simulation results. It is noticeable that the approach used this work for determination of equilibrium void fraction is only valid if the utilized force fields are accurate. © 2016 American Institute of Chemical Engineers AIChE J, 62: 4066–4077, 2016