Radiation protection of poly(vinyl chloride) by N,N-dialkyl dithiocarbamate substitution

The effect of N,N-dialkyl dithiocarbamate substitution on the radiation stability of poly(vinyl chloride) (PVC) film was studied. PVC containing 6.5–15.7 mole-% N,N-dimethyl dithiocarbamate (PDM) and PVC containing 8.3–17.5 mole-% N,N-diethyl dithiocarbamate (PDE) was irradiated with γ-rays from a Co-60 source at room temperature under vacuum. The evolved gaseous products were measured and analyzed with a mass spectrometer. The apparent G values for gas evolution of PDM and PDE decreased remarkably. For example, a G value of 0.10 was obtained for a PDE which contains 17.5 mole-% diethyl dithiocarbamate group. The mass spectrum of the evolved gas from the same PDE sample with 10-Mrad irradiation showed no hydrogen chloride to be present. The external protection was studied using polymer-blended films of PVC and PDE or PDM. The stabilization coefficients for internal protection and external protection in polymer blends were calculated. Although the ESR spectrum of the irradiated PDM, PDE, and PVDE which is synthesized by polymerization of S-vinyl-N,N-diethyl dithiocarbamate (VDE) showed the same sulfur radicals, they were different from those of the irradiated cysteamine hydrochloride and PVC containing N-methyl dithiocarbamate (PMD). From these results, the protection of a polymer by a covalently bound dithiocarbamate was discussed.     

A new buried-gate GTO structure having a large safe operating area

A novel structure of a buried-gate GTO (gate turn-off thyristor) was proposed for expanding the safe operating area (SOA) of unit-GTOs. The SOA of unit-GTOs in a test sample GTO and the spike voltage at the limit of turn-off of the test sample were investigated experimentally. The SOA was calculated by means of a simple model in order to study the mechanism of the expansion of SOA in the structure. The SOA was expanded due to the reduction of the sheet resistance of the p-base layer by the fine mesh pattern of the buried layer. Corresponding to the increased size of the SOA, the spike voltage increased to 1000 V     

An application of scattered-light photoelasticity in the determination of the side pressure distribution of the pressed powder bed

Improved photoelastic measurements were applied for the determination of the side pressure distribution of the pressed powder bed on the basis of the principle given in the previous paper. Absolute values of stress components σ_r, σ_θ, σ_z and τ_rz in the container wall were determined from the measurements of three different directions of incidence of the laser beam. By extrapolating the values of σ_r and τ_rz to the inner surface of the container, side pressure components of the powder bed, normal and tangential to the wall respectively, were obtained. Indirect confirmations for the validity of the results were given.     

Simulation of cross-talk reduction in multimode waveguide-based micro-optical switching systems by use of single-mode filters

We propose a method to reduce cross talk by using single-mode filters, namely, extracting the fundamental mode from a multimode optical network (EFMON). The EFMON effect is evaluated for a three-step switching system consisting of cascade electro-optic (EO) waveguide prism deflector (WPD) micro-optical switches (MOSs) and a multimode waveguide network. The WPD MOS is optimized for single-mode operation in lead lanthanum zirconate titanate thin films as EO slab waveguides with a driving voltage of 12 V, a length of 310 microm, and a channel distance of 20 microm. Beam propagation method simulation reveals that mode disturbance, higher-order modes, and cross talk are accumulated by switching steps. A single-mode filter for EFMON in the output region of the switching system reduces cross talk to below -20 dB at a propagation length of 2000 microm in the single-mode filter and below -30 dB at 20000 microm.     

A 385–500 GHz SIDEBAND-SEPARATING (2SB) SIS MIXER BASED ON A WAVEGUIDE SPLIT-BLOCK COUPLER

We have developed a 385–500 GHz sideband-separating (2SB) mixer, which is based on a waveguide split-block coupler at the edge of the H-plane of the 508 μm × 254 μm (WR 2.0) waveguide, for the Atacama Large Millimeter/submillimeter Array (ALMA). An RF/LO coupler, which contains an RF quadrature hybrid, two LO couplers, and an in-phase power divider, was designed with the issue of mechanical tolerance taken into account. The RF/LO coupler was measured optically with a microscope and electrically with a submillimeter vector network analyzer. The image rejection ratio (IRR) and the single-sideband (SSB) noise temperature of the receiver using the RF/LO coupler have also been measured. The IRR was found to be larger than 8 dB and typically ～ 12 dB in the 385–500 GHz band. The SSB noise temperature of this receiver is 80 K at the band center, which corresponds to 4 times the quantum noise limit (hf/k) in SSB, and 250 K at the band edges.     

Development of a cryogenic stage for an ion-milling instrument

A specimen-cooling device has been designed, manufactured and integrated into a commercial ion-milling instrument for transmission electron microscopy. The instrument enables us to prepare section specimens of tin-plated Cu without forming intermetallic compound particles and/or voids. The results show that cooling of specimen during ion-milling process is necessary for fine structure investigations of low melting temperature materials.     

Fluorine uptake into human enamel around fluoride-containing dental materials during cariogenic pH cycling

Using PIGE (Proton Induced Gamma Emission) technique at TARRI (Takasaki Advanced Radiation Research Institute), Japan, we measured fluorine (F) uptake into the tooth enamel around two fluoride-containing materials during caries progression using pH cycling. Class V cavities in extracted human teeth were drilled and filled with fluoride-containing materials (i.e. “Fuji IX” (FN) and “UniFil flow with MEGA bond” (UF)) and a non-fluoride-containing material (i.e. “SOLARE with MEGA bond” (SO)). Three 120 μm longitudinal sections including the filling material were obtained from each tooth. In order to simulate daily acid attack occurring in the oral cavity, the pH cycling (pH 6.8–4.5) was carried out for 1, 3 and 5 weeks, separately. After pH cycling, the caries progression in all specimens was observed using transverse microradiography (TMR). The F and calcium distributions of the specimens were evaluated using PIGE and PIXE techniques. The F distribution of the specimens clearly showed the F uptake from FN into enamel adjacent to the filling material, while the F uptakes from UF and SO were not detected. For UF, the MEGA bond (non-fluoride-containing) between the tooth and UniFil flow interfered with the F absorption into the tooth. For FN, the amount of F uptake into the subsurface enamel increased during pH cycling. The amount of F uptake in 5-week pH cycling had significantly higher value compared to those in 1- and 3-week pH cycling. For UF and SO, there were no significant differences between the different durations of pH cycling.Among fluoride-containing materials, there were some differences in the F uptake with increased pH cycling, which could possibly lead to obtaining difference in clinical performance. The data obtained using PIGE and PIXE techniques were useful in understanding the benefit of fluorine by means of fluoride-containing material for preventing caries.     

EFFECT OF HEATING RATE OF BIOMASS FEEDSTOCK ON CARBON GASIFICATION EFFICIENCY IN SUPERCRITICAL WATER GASIFICATION

The effect of feedstock heating rate on the efficiency of gasification of a biomass in supercritical water was investigated using a continuous bench-scale reactor. A glucose solution (biomass model compound) and a cabbage slurry were gasified in supercritical water at various heating rates in a preheater. The results show that in the range of 10-30 K/s, carbon gasification efficiency improved as the heating rate increased.     

A 600-MHz single-chip multiprocessor with 4.8-GB/s internal shared pipelined bus and 512-kB internal memory

A 600-MHz single-chip multiprocessor, which includes two M32R 32-bit CPU cores , a 512-kB shared SRAM and an internal shared pipelined bus, was fabricated using a 0.15-/spl mu/m CMOS process for embedded systems. This multiprocessor is based on symmetric multiprocessing (SMP), and supports modified-exclusive-shared-invalid (MESI) cache coherency protocol. The multiprocessor inherits the advantages of previously reported single-chip multiprocessors, while its multiprocessor architecture is optimized for use as an embedded processor. The internal shared pipelined bus has a low latency and large bandwidth (4.8 GB/s). These features enhance the performance of the multiprocessor. In addition, the multiprocessor employs various low-power techniques. The multiprocessor dissipates 800 mW in a 1.5-V 600-MHz multiprocessor mode. Standby power dissipation is less than 1.5 mW at 1.5 V. Hence, the multiprocessor achieves higher performance and lower power consumption. This paper presents a single-chip multiprocessor architecture optimized for use as an embedded processor and its various low-power techniques.