The cranial MRI in severe cerebral palsy: a comparative study with clinical data

The magnetic resonance examination was performed in 38 patients with severe cerebral palsy (CP; 15 males and 23 females) who had both motor delay (unable to move anywhere) and mental retardation (I. Q or D. Q below 30). Neuroimaging findings were compared with the CP type, etiology, and grade of understanding of language. Cranial magnetic resonance imagings (MRI) in CP were divided into five types. Type 1 : nine predominantly showed cyst-liked ventricles and periventricular hyperintensity on T2-weighted imaging (PVH) and only scarred basal ganglia and thalamus were visible. All suffered from neonatal asphyxia and the clinical type was rigospastic tetraplegia (RST). Type 2: eleven predominantly showed PVH and hyperintensity on T2-weighted (HT2) in basal ganglia and thalamus. All suffered from neonatal asphyxia and the clinical type was RST or rigospastic diplegia. Type 3: five showed PVH and three had cortical atrophy. All suffered from neonatal asphyxia and the clinical type was spastic diplegia. Type 4: four predominantly showed HT 2 in putamen and thalamus. Three had cortical atrophy. All suffered from neonatal asphyxia. The clinical type was athetotic CP (ATH). Type 5: nine predominantly showed HT 2 in globus pallidus. Four had cortical atrophy and two had hippocampal atrophy. All suffered from neonatal jaundice and the clinical type was ATH. All patients who suffered from neonatal asphyxia and spastic CP had MRI in PVH. All patients who suffered from neonatal asphyxia and ATH showed HT 2 in putamen and thalamus. Almost patients who suffered neonatal jaundice and ATH showed HT 2 in globus pallidus. With athetotic CP, cases with atrophy of the cerebral cortex or/and hippocampus were lower grade of understanding of language than no atrophy of both. The result of studies of MRI are in agreement with neuropathological findings.     

Acute myocardial infarction during pregnancy caused by coronary artery spasm

A 33-year-old pregnant woman suffered from acute anteroseptal myocardial infarction at the 19th gestational week. Despite periodic attacks of myocardial ischaemia after admission, the coronary arteriograms under the use of nitroglycerin were normal. Thereafter, she remained free from the ischaemic events with diltiazem hydrochloride and delivered a healthy baby. The coronary arteriography at puerperium also showed no organic narrowing. However, the provocative test with acetylcholine chloride caused severe spasm of the left anterior descending coronary artery. These findings strongly suggest that acute myocardial infarction in this pregnant woman was caused by coronary artery spasm.     

Association with capsid proteins promotes nuclear targeting of simian virus 40 DNA

All animal DNA viruses except pox virus utilize the cell nucleus as the site for virus reproduction. Yet, a critical viral infection process, nuclear targeting of the viral genome, is poorly understood. The role of capsid proteins in nuclear targeting of simian virus 40 (SV40) DNA, which is assessed by the nuclear accumulation of large tumor (T) antigen, the initial sign of the infectious process, was tested by two independent approaches: antibody interception experiments and reconstitution experiments. When antibody against viral capsid protein Vp1 or Vp3 was introduced into the cytoplasm, the nuclear accumulation of T antigen was not observed in cells either infected or cytoplasmically injected with virion. Nuclearly introduced anti-Vp3 IgG also showed the inhibitory effect. In the reconstitution experiments, SV40 DNA was allowed to interact with protein components of the virus, either empty particles or histones, and the resulting complexes were tested for the capability of protein components to target the DNA to the nucleus from cytoplasm as effectively as the targeting of DNA in the mature virion. In cells injected with empty particle-DNA, but not in minichromosome-injected cells, T antigen was observed as effectively as in SV40-injected cells. These results demonstrate that SV40 capsid proteins can facilitate transport of SV40 DNA into the nucleus and indicate that Vp3, one of the capsid proteins, accompanies SV40 DNA as it enters the nucleus during virus infection.     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.     

Diffuse pollution in Japan: issues and perspectives.

Many parts of Japan have experienced rapid urbanization and industrialization over the past 50 years. This trend resulted in severe water pollution in many urban areas. To address the pollution problems, several measures such as construction of sewerage systems and enactment of laws and regulations have been undertaken. Because of these measures, the water quality has been improved to some extent. However, many water quality concerns still remain and are attributed in part to diffuse pollution. In this paper, historical progress, present situation and future aspects of diffuse pollution problems in Japan are reviewed. It is noted that solving diffuse pollution problems will require a combination of several measures including application of conventional treatment technologies and natural purification systems, implementation of appropriate policy measures, and promotion of citizen participation.     

Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

High-reliability GaAs-AlGaAs HBTs by MBE with Be base doping andInGaAs emitter contacts

The authors have developed a modified MBE growth process to produce high-gain n-p-n GaAs-AlGaAs heterojunction bipolar transistors (HBTs) with a mean time to failure (MTTF) of 1.5×10⁸ h at 125°C. Beryllium incorporation and diffusion are controlled through a combination of reduced substrate temperature and increased As/Ga flux ratio during MBE growth, resulting in extremely stable HBT profiles. The authors also demonstrate graded InGaAs surface layers with nonalloyed refractory metal contacts that significantly improve ohmic reliability compared to alloyed AuGe contacts. The ability to produce robust HBTs by MBE is critically important to this technology     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

50 J discharge-pumped XeCl laser

An X-ray preionized XeCl laser with a wide aperture of 10×10 cm² is described. The density for preionization electrons is estimated from an X-ray energy distribution to be greater than 6×10⁹ cm^-3 under operational gas conditions. In high pressure operation at 4500 torr, sufficient preionization has led to successful discharge-breakdown at a low E/N of 6.4×10^-17 V-cm², resulting in a high electrical efficiency of 3.1% with an output energy of 17.6 J. An output energy of 50 J in an 85-ns (FWHM) optical pulse has been extracted from an active volume of about 10:1 for a pulse-forming-line (PFL) voltage of 400 kV. The effects of impedance transformation of a pulse-transmission-line (PTL) following the PFL have been investigated using two types of PTL with output impedances of 0.26 and 0.48 Ω