Enzymatic genosensor on streptavidin-modified screen-printed carbon electrodes

Voltammetric enzyme genosensors on streptavidin-modified screen-printed carbon electrodes (SPCEs) for the detection of virulence nucleic acid determinants of pneumolysin and autolysin genes, exclusively present on the genome of the human pathogen Streptococcus pneumoniae, were described. Alkaline phosphatase (AP) and 3-indoxyl phosphate were used as the enzymatic label and substrate, respectively. The oligonucleotide probes were immobilized on electrochemically pretreated SPCEs through the streptavidin/biotin reaction. The adsorption of streptavidin was performed by deposition of a drop of a streptavidin solution overnight at 4 degrees C on the surface of the SPCEs. After the hybridization reaction with FITC-labeled complementary targets, the enzyme is captured using an anti-FITC antibody conjugated to AP. In nonstringent experimental conditions, these genosensors can detect 0.49 fmol of 20-mer oligonucleotide target and discriminate between a complementary oligo and an oligo with a three-base mismatch. In the presence of 25% formamide in the hybridization buffer, a single-base mismatch on the oligonucleotide target can be detected.     

Real-time monitoring of high-temperature corrosion in stainless steels by open-path laser-induced plasma spectrometry

Open-path laser-induced plasma spectrometry (OP-LIPS) represents an appealing alternative for the real-time monitoring of high-temperature processes due to its inherent non-invasive and remote capabilities. In this work, stainless steel samples have been analyzed at 10 meters from the laser source. The effect of the high-temperature conditions to the protective anti-corrosion layer have been analyzed, as well as additional factors such as the type of steel and the exposure time. The number of pulses required to ablate the alteration layer has been found to follow a linear relationship with the square root of the exposure time, in excellent agreement with the off-line thermogravimetric measurements described in the literature.     

CMOS开关集成运放同步解调器

<正> 在电子技术的许多领域中,如自动控制系统、斩波直流放火、锁相技术、磁场探测等都要广泛地采用相敏检波器来把一个交流信息转换为直流电压信息。该交流信息与参考信号的频率相等,其直流电压与交     

Identification and Quantitation of Allelochemicals from the Lichen Lethariella canariensis: Phytotoxicity and Antioxidative Activity

Phytotoxicity-based extraction and fractionation were employed to separate allelochemicals contained in an extract of Lethariella canariensis. Twelve phenolic substances were isolated from the phytotoxic fraction Letharal of the thalli. These were identified by spectroscopic methods, physicochemical constants, and HPLC chemical correlation, and determined to be atranol (2), chloroatranol (3), hematommic acid (4), chlorohematommic acid (5), methyl hematommate (6), methyl chlorohematommate (7) (new compound), ethyl hematommate (8), ethyl chlorohematommate (9), methyl -orsellinate (10), atranorin (11), chloroatranorin (12), and (+)-usnic acid (13). Further identification and quantification of these allelochemicals in the environment were conducted by HPLC. Several phenolic compounds showed moderate antimicrobial activity. The cytostatic activity of the polyphenols was investigated on U937 and HL-60 cells. All compounds were assayed, with the exception of 10. The Letharal mixture decreased cell viability in both cell lines. Protection against lipid peroxidation was investigated using brain homogenates. Compounds 2, 3, 6, 8, 11, and Letharal decreased H₂O₂/Fe⁺² induced lipid peroxidation in a concentration-dependent manner, while 10 and 13 were unable to protect tissue against oxidative stress.     

Structural characterization of chromosome I size variants from a natural yeast strain

Many yeast strains isolated from the wild show karyotype instability during vegetative growth, with rearrangement rates of up to 10(-2) chromosomal changes per generation. Physical isolation and analysis of several chromosome I size variants of one of these strains revealed that they differed only in their subtelomeric regions, leaving the central 150 Kb unaltered. Fine mapping of these subtelomeric variable regions revealed gross alterations of two very similar loci, FLO1 and FLO9. These loci are located on the right and left arms, respectively, of chromosome I and encompass internal repetitive DNA sequences. Furthermore, some chromosome I variants lacking the FLO1 locus showed evidence of recombination at a DNA region on their right arm that is enriched in repeated sequences, including Ty LTRs. We propose that repetitive sequences in many subtelomeric regions in S. cerevisiae play a key role in karyotype hypervariability. As these regions encode several membrane-associated proteins, subtelomeric plasticity may allow rapid adaptive changes of the yeast strain to specific substrates. This pattern of semi-conservative chromosomal rearrangement may have profound implications, both in terms of evolution of wild strains and for biotechnological processes.     

Biochemical mechanism of the effect of barbital on rifamycin B biosynthesis by Amycolatopsis mediterranei (M18 strain)

It is well known that 5,5-diethylbarbituric acid (barbital) in the culture medium can stimulate the production of rifamycin B by Amycolatopsis mediterranei, particularly in industrial processes. However, the mechanism by which barbital exerts this effect is unknown. Results in this work show that the barbital effect is only evident under low aeration conditions (50-ml microfermentors with 7 ml of medium, 0.08 l/h air flow). Under these conditions, cultures with barbital showed similar CO2 production (in relation to a control without barbital), but higher oxygen uptake indicated that the extra O2 consumed was used in the increased rifamycin biosynthesis. Moreover, using a resting cell system where no antibiotic is produced, it was possible to show that barbital inhibits the respiratory chain, since O2 uptake decreased by 30%. Finally, we present biochemical results that suggest that a cytochrome P450-type monoxygenase, which can use atmospheric oxygen, is induced by barbital in an industrial-type strain of A. mediterranei.     

Correlation between DNA synthesis in the second, third and fourth generations of spermatogonia and the occurrence of apoptosis in both spermatogonia and spermatocytes

In the seminiferous epithelium, both DNA synthesis and apoptosis occur at equivalent stages in various species, with apoptosis taking place mainly at the same stages as DNA replication in the second, third and fourth spermatogonial generations. As preservation of the cellular associations found at these stages may have some functional significance, it is important to determine whether there is a correlation between these cellular events. In this study, pairs of immunoperoxidase-stained adjacent testis sections from rats, mice, rabbits and cats in which either bromodeoxyuridine incorporated into the newly synthesized DNA strand (BrdU labelling) or DNA 3' end labelling of the apoptotic DNA fragments (TUNEL assay) were detected were compared. In addition, both events were analysed in double-labelled sections. These two methods revealed a clear correlation between the occurrence of DNA replication in the second to fourth generations of spermatogonia and most physiological apoptosis taking place in both spermatogonia and spermatocytes in the three different mammalian orders (Rodentia, Lagomorpha and Carnivora). This correlation may result from the synchronization of mitotic spermatogonial and meiotic spermatocyte cell cycle checkpoints operating at these stages.     

Direct determination of carbohydrates, amino acids, and antibiotics by microchip electrophoresis with pulsed amperometric detection

The separation and detection of underivatized carbohydrates, amino acids, and sulfur-containing antibiotics in an electrophoretic microchip with pulsed amperometric detection (PAD) is described. This report also describes the development of a new chip configuration for microchip electrophoresis with PAD. The configuration consists of a layer of poly(dimethylsiloxane) that contains the microfluidic channels, reservoirs, and a gold microwire, sealed to a second layer of poly(dimethylsiloxane). Example separations of carbohydrates, amino acids, and sulfur-containing antibiotics are shown. The effect of the separation and injection potentials, buffer pH and composition, injection time, and PAD parameters were studied in an effort to optimize separations and detection. Detection limits ranging from 6 fmol (5 microM) for penicillin and ampicillin to 455 fmol (350 microM) for histidine were obtained.     

Group velocity and dispersion model of coupled-cavity waveguides in photonic crystals

A theoretical model of the group velocity, dispersion parameter, and dispersion slope of coupled-cavity waveguides in photonic crystals is reported. Results arising from closed-form expressions show a good agreement with simulation results obtained by employing a plane-wave expansion method. Coupled-cavity waveguides present interesting dispersion properties that may be employed in applications such as optical signal processing, dispersion compensation, and optical delay lines.     

Determination of aniline derivatives in oils related to the toxic oil syndrome by atmospheric pressure ionization-tandem mass spectrometry

In 1981, an unknown disease appeared in Spain, the Spanish Toxic Oil Syndrome. Nowadays and despite all efforts, the etiological agent is still unknown. Early studies showed a link between this illness and the consumption of denatured rapeseed oil fraudulently processed and marketed as edible oil. Two families of aniline derivatives present in these oils (fatty acid anilides and acylated phenyl amino propanediol derivatives or PAPs) were found to be good chemical markers of toxic oils. In this work, a new method has been developed to analyze these aniline derivatives in oil samples by HPLC-MS and HPLC-MS/MS with an API source. For their quantification, three different internal standards were used, one for anilides and two for PAPs. Quantification limits were 8 ppm for anilides and 0.2 ppm for PAPs. Anilides and PAPs were found in marker-positive samples at levels up to 50,000 and 330 ppm, respectively. The relative abundance of the different fatty acid anilides and PAPs correlates with the fatty acid composition of the oils. More than 2,600 different samples were analyzed by this method in the most exhaustive screening of suspected toxic oils carried out to date.