Bipolar electric fatigue behaviour as a function of field strength in antiferroelectric (Pb,Ba,La)(Zr,Sn,Ti)O3 ceramics

The bipolar electric fatigue behaviour of antiferroelectric ceramics with the composition of Pb_0.88Ba_0.10La_0.02(Zr_0.55Sn_0.35Ti_0.10)O₃ was investigated under various cycling fields. The material exhibits a degradation in the maximum field induced strain, a diffuse AFE-FE phase transition and an enhancement in the diffusion character of the FE-AFE phase transition due to electric cycling. Those variations increase with cycle number, indicating a logarithmic fatigue up to 10⁸ cycles. There is no indication for the variations to be recovered, and the symmetry of the negative and positive parts of the strain hysteresis loops still remains. Higher cycling field results in a stronger deterioration of the maximum field induced strain and a larger extent of diffusion in AFE-FE and FE-AFE phase transitions. The normalized maximum strain shows nearly the same scale of degradation when the materials are cycled at various electric fields. After a heat treatment at 500°C for 1 h, the variations in the AFE-FE and FE-AFE phase transition due to cycling disappear, whereas the maximum strain resumes almost to its original value. Electrochemical variations are considered to contribute to the main fatigue mechanism for the material under investigation.     

Effect of gas mixing ratio on gas-phase composition and etch rate in an inductively coupled CF4/Ar plasma

In this work, we carried out investigations aimed at understanding the effect of gas mixing ratio on plasma parameters, gas phase composition and etch rate in CF₄/Ar inductively coupled plasma. For this purpose, a combination of experimental methods and modelling was used. Experiments showed that electron temperature and electron density are not very sensitive to variations of Ar content in CF₄/Ar plasma. From a zero-dimensional plasma model, the densities of both neutral and charged particles change monotonically. The analysis of surface kinetics based on an ion-assisted etching mechanism showed the possibility of non-monotonic etch rate behaviour due to a concurrence of chemical and physical etching pathways.     

A continuum model for pumping performance of turbomolecular pumps in all flow regimes

In the present study a continuum model for one-dimensional plane Couette-Poiseuille flow is implemented to turbomolecular pumps in different flow regimes. Pumping performance of various turbomolecular pumps including 6 single rotors, a rotor-stator row, a rotor-stator-rotor row, and a multi-row with 13 alternative rotor-stator rows is considered here. The obtained results show that the model provides good quantitative values for pumping performance of turbomolecular pumps over the whole regimes ranging from molecular flow to transition to slip flow.     

Theory to boil-off gas cooled shields for cryogenic storage vessels

An intermediate refrigeration with boil-off gas cooled shields using the boil-off gas stream is an alternative method to the conventional intermediate refrigeration with a cryogenic liquid.By using an analytical calculation method relations are derived, which enable complete predictions about the effectiveness of an intermediate refrigeration with boil-off gas cooled shields as a function of the number of shields for the different stored cryogenic liquids. For this theoretical derivation however, the restrictive assumption must be made that the thermal conductivity of the used insulation material has a constant value between the considered temperature boundaries.For purposes of a more exact calculation a numerical method is therefore suggested, which takes into consideration that the thermal conductivity is temperature-dependent. For a liquid hydrogen storage vessel with a perlite-vacuum insulation e.g., the effectiveness of one shield and its equilibrium temperature are given as a function of the position of the shield in the insulation space.     

Boiling: Size Distribution of Bubbles as Demanded by the Principle of Maximum Information

The principle of maximum informational entropy is used to find the probability density function for the departure radius of a bubble in boiling on a solid surface. A general relation is derived, which leads to particular expressions.     

The Difference in Turbulent Diffusion between the Active and Passive Scalars in a Thermally Stably Stratified Medium

The difference in the turbulent diffusion between the active (heat) and passive (mass) scalars in a thermally stably stratified medium is investigated. The axisymmetric problem is treated on the formation of a turbulent circulation flow above a heated disk and on the turbulent diffusion of a passive scalar (impurity) from a continuous surface source in a stably stratified medium. The results indicate that the thermal stratification causes appreciable differences in the coefficients of turbulent transfer between the active (heat) and passive (mass) scalars. This means that the assumption of the identity of the coefficient of turbulent diffusion of heat and mass, employed in conventional models of turbulence, produces significant errors in estimating the heat and mass transfer in a thermally stably stratified medium.     

Filtration of Non-Newtonian Hydrocarbon Fluid in a High-Frequency Electromagnetic Field

The paper gives the results of experimental investigations of the initial pressure gradient of bituminous oil and the time dependences of variation of the temperature in a formation model and of the well production rate in a microwave-frequency electromagnetic field. The effect of strong decay of the non-Newtonian properties of bituminous oil is revealed. The nonuniformity of temperature distribution over the formation thickness is demonstrated, which depends on the initial production rate of the well and on the duration of stimulation of the bottom-hole zone of formation.     

CMOS circuit testing via time-resolved luminescence measurements and simulations

The continuous trend in modern CMOS technology toward smaller devices and faster clock frequency is challenging the picosecond imaging circuit analysis technique. In this paper we discuss the role of the single-photon avalanche diode with very sharp time resolution in testing CMOS circuits. Thanks to the 30 ps-time resolution, innovative measurements regarding delays and jitter are presented, along with a case study. A compact model of the luminescence is also proposed and used to compare on-chip electrical signals with optical waveforms.     

Implementation of a mechanics-based system for estimating the strength of timber

The most accurate way of determining the strength of lumber requires destructive testing. An intelligent mechanics-based lumber-grading system was developed to provide a better estimation of the strength of a board nondestructively. This system processed X-ray-extracted geometric features (of 1080 boards that eventually underwent destructive strength testing) by using finite element methods to generate associated stress fields. The stress fields were then fed to a feature-extracting-processor, which produced 26 strength predicting features. The best strength predicting features were determined from the coefficient of determination (correlation r/sup 2/) between the features and actual strengths of the boards. The coefficients of determination of each feature (or combination of features), with the actual strength of the board, were calculated and compared. A coefficient of determination of 0.4158 was achieved by using a longitudinal (along the local grain angle) maximum stress concentration (MSC) feature to predict the estimated strength of lumber.     

Effect of magnetic hysteresis on rotational losses in heteropolar magnetic bearings

This paper extends a method for predicting rotational losses for laminated rotors of heteropolar magnetic bearings by using an eddy-current model to include the effect of magnetic hysteresis in the rotor material. It compares the modeling results to the experimental data that were used earlier to assess the loss model neglecting hysteresis. The correction to the total electromagnetic loss in the rotor due to the hysteresis is significant at rotational speeds below 6000 revolutions per minute (RPM), where the model including hysteresis effects provides much better agreement with existing experimental data.