L'observation des processus de groupe: difficultés méthodologiques et perspectives.

Discusses problems involved in collecting data based on observation of small groups. The example of a study of manifestations of cooperation in groups of preschoolers (aged 21–57 mo) is used for illustration. Statistical treatment of observation data and global analysis of data are considered. (English abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of a DC corona electrical discharge on the airflow along a flat plate

Ability of a DC electrical discharge to control low-velocity airflow along a flat plate is analyzed. Specifically, the electrodes are flush mounted on the insulating surface of the plate creating a tangential corona discharge at close vicinity of the wall. In this paper, visualizations of the low-velocity airflow (up to 1.4 m/s corresponding to Re=16 000) along the flat plate are presented. They show that the ionic wind induced by the corona discharge modifies the original airflow considerably, resulting in the airflow reattachment to the wall and reduction of the wake size. Velocity measurements by particle imaging velocimetry and by Pitot tube are conducted in a wind-tunnel loop for higher airflow velocities (up to 11 m/s corresponding to Re=117 800). Results show that the corona discharge at such high airflow velocities does affect significantly the velocity profile within the viscous boundary layer.     

Cassava retting: Optimisation of a traditional fermentation by an experimental research methodology

Retting, a spontaneous and traditional fermentation of cassava roots in Central Africa, was optimised in terms of time and the quality of the end-product. Optimal conditions were achieved by using an experimental research methodology. Temperature is the most influential factor, with an optimum of 34°C for quicker retting. The roots should be peeled and soaked in water immediately after harvesting to increase the quality of cassava foods. Inoculation of water with juice from a prior retting helps in cassava detoxification but has no influence on the time or the quality of foo-foo. Foo-foo samples had the most favourable organoleptic quality when an incubation temperature of between 28 and 37°C was used. Using optimal conditions, retting time was reduced 3-fold, and foo-foo of high and constant quality could be processed.     

Relationship between the enzymatic determination of starch and the starch iodine index in two varieties of cider apple

Monitoring the hydrolysis or disappearance of starch by the starch iodine test is a simple procedure for determining the maturity of cider apples, but it does not indicate the exact amount of starch present. So far, studies of starch in apples have dealt exclusively with dessert apples. In this paper the relationship between the visual starch index, the dark‐coloured surface area and the real starch content was studied in two varieties of cider apple commonly used in Normandy (France). Starch determination in cider apples required adapting the protocol provided by the Boehringer enzymatic kit. The work led to proposing a simplified index with five scales instead of 10. This index gives the correspondences between the new and old scales as well as the probable starch contents for each new scale. © 2002 Society of Chemical Industry     

Cationic ring-opening polymerization of hexamethylcyclodisilazane: General aspects and tentative mechanisms

The ring-opening polymerization of hexamethylcyclodisilazane (D_2NMe), initiated by methyl triflate in 1,2-dichloroethane, forms in the first, fast kinetic step both linear polymer and cyclic dimer (D_4NMe). Subsequently a slow depolymerization process occurs leading to exclusively cyclotrisilazane (D_3NMe). On the basis of kinetic measurements carried out using an adiabatic calorimetric technique and complementary experiments, mechanisms of both propagation, cyclization and back-biting reactions are proposed. The influence of the reaction temperature was also studied; it is demonstrated that, at low temperature, polymerization does not lead to cyclic oligomer formation. In such conditions, the polymerization presents a ‘living’ character.     

Photovoltaic collectors efficiency according to their integration in buildings

A model for building integrated photovoltaic systems has been developed and implemented in a dynamic simulation tool. This tool takes into account the thermal interactions between the PV collector and the building. The influence of the type of integration upon the PV collector efficiency has been evaluated and hybrid PV/air collectors have been studied. An overall efficiency is defined, including the production of electricity and heat. A case study has been performed on two different typical buildings. In the case of a multi-crystalline silicon PV collector integrated on the roof of a single family house located in Paris, the efficiency of unventilated PV modules fixed on the roof is 14%. If the PV collector is used to preheat the ventilation air, the efficiency reaches 20%. A proper building integration also improves the environmental balance of PV technologies over their life cycle.     

Microwave heating of poly(ethylene terephthalate) bottle preforms used in the thermoforming process

Thermoforming (free blowing) of poly(ethylene terephthalate) preforms was successfully and quickly performed in a rotating system designed for dielectric hysteresis heating. Temperature profile modeling was carried out with the amorphous poly(ethylene terephthalate) permittivity at different temperatures. The Maxwell and heat equations were used to determine the best profile and power tuning. The determination of the theoretical boundary conditions was accomplished by the adjustment of the numerical transient external surface wall temperature with experimental infrared pyrometry results. In comparison with infrared, microwaves allowed high power density absorption inside the perform wall without a dramatic temperature gradient. Consequently, the heat blowing stage could be accelerated, and the process took at least 5 times less energy than infrared heating. Industrial applications involve the integration of the molding step and the design of the overall process. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

Catalysis, the turntable for a clean future

Upgrading the bottom of the barrel for clean fuel production, developing new engines with optimized catalytic posttreatments, implementing clean catalytic combustion technologies, improving the overall CO₂ balance via catalytic processes and, lastly, developing new water purification techniques represent major upheavals in catalysis linked to refining and environmental protection. This paper, thus, will focus on the determining contribution of catalysis to the most recent achievements in these domains. A technico-economic approach will follow, underlining their main incentives and drawbacks within the framework of future environmental constraints.