Ideality and noise figure characteristics of r.f. sputtered millimetre GaAs diodes

Refractory Schottky barriers have been incorporated in millimetre GaAs mixer diodes to improve r.f. performance and burnout resistance. It is shown that low power r.f. sputter deposition of TiW and Ti-Mo refractories results in degradation of noise temperature ratio and to a first approximation does not affect d.c. parameters, especially the ideality factor.     

Solar cooling performance predictions via stochastic weather algorithms

System simulations for sizing and performance predictions of various solar systems require some form of weather input to act as a system stimulus. When actual weather data is used, hourly simulations are expensive and require considerable data handling. For many design procedures, however, hourly information is not needed, and simpler methods are desirable. One such method employs a probabilistic approach. This method involves the use of an algorithm that generates a probabilistic matrix, and an analytical formulation which is used to generate synthetic weather data. The approach has been found to be satisfactory. This work uses the stochastic (probablistic) method to produce representative weather for five geographic regions in the U.S. for the summer months. Parallel runs are conducted with real and stochastic weather. A comparison of the results clearly shows that the probabilistic approach can satisfactorily substitute for real weather for long-term system performance.     

Some aspects of biomedical engineering research in New Delhi

Biomedical engineering has been recognized in India for the last decade. Technological developments have been in areas of importance to the country, with several groups actively involved in the promotion of bioengineering, particularly in New Delhi. A group at the National Physical Laboratory has contributed significantly to the field of ultrasonics as well as to the development of piezoelectric transducers for other biomedical uses. The Centre for Biomedical Engineering of the Indian Institute of Technology and the All India Institute of Medical Sciences is one of the country's leading centres producing outstanding work in areas like instrumentation, rehabilitation, biomaterials, modelling and analysis. Research in technology applied to reproductive physiology (an area especially relevant to India's needs) was initiated at this centre. Research at the School of Environmental Sciences, Jawaharlal Nehru University has elucidated the effects and mechanisms of the action of low-energy electromagnetic radiation and ultrasound on biological systems--in one of the school's projects the use of bone material for ultrasonic transducers and optical detectors was successfully demonstrated. A selected list of publications shows the wide spectrum of research carried out at these institutions.     

Improved bounds for large scale capacitated arc routing problem

The Capacitated Arc Routing Problem (CARP) stands among the hardest combinatorial problems to solve or to find high quality solutions. This becomes even more true when dealing with large instances. This paper investigates methods to improve on lower and upper bounds of instances on graphs with over 200 vertices and 300 edges, dimensions that, today, can be considered of large scale. On the lower bound side, we propose to explore the speed of a dual ascent heuristic to generate capacity cuts. These cuts are next improved with a new exact separation enchained to the linear program resolution that follows the dual heuristic. On the upper bound, we implement a modified Iterated Local Search procedure to Capacitated Vehicle Routing Problem (CVRP) instances obtained by applying a transformation from the CARP original instances. Computational experiments were carried out on the set of large instances generated by Brandão and Eglese and also on the regular size sets. The experiments on the latter allow for evaluating the quality of the proposed solution approaches, while those on the former present improved lower and upper bounds for all instances of the corresponding set.     

The influence of mesoscale eddies on a commercial fishery in the coastal waters of the Andaman and Nicobar Islands,India

Mesoscale eddies enhance the productivity in a stratified coastal environment by upwelling. The seas around the Andaman and Nicobar Islands have been found to have frequent mesoscale eddy activity. Commercial fishing grounds coincide with upwelling areas associated with cyclonic and anticyclonic eddies and also with areas between two adjacent eddies. There are different eddy zones supporting different types of fishing gears and fish. The current study aims at identifying the different zones of mesoscale eddies in the Andaman Sea and compares the productivity and fishing activity in each of them. Data collected from 454 commercial fishing trips in the Andaman Sea along with maps of sea level anomaly and Moderate Resolution Imaging Spectroradiometer (MODIS) global level 3 mapped thermal infrared (IR) daytime sea surface temperature (SST) from the Aqua and Terra satellites were used for the study. Known upwelling areas such as the periphery of anticyclonic and the core of cyclonic eddies showed higher catches in longlines, ring seines among the fishing gears, and among all the fish species groups. Downwelling areas such as the periphery of cyclonic and the core of anticyclonic eddies showed lower catches with ring seines and the fish species groups. Areas in between adjacent eddies were explored in this study and the fish captures in such areas were found to be different with types of fishing and the target fish group. The study shows results that link eddy activity with the performance of a fishery.     

Reversible Z-E Isomerism and Pharmaceutical Implications for SU5416

ABSTRACT

SU5416 (Z-isomer), the first in its class of angiogenesis inhibitors, in solution converts to the E-isomer following light exposure and reverts to the Z-isomer in the dark. Kinetics of this Z-E isomerism in pharmaceutical media is reported. Analytical solutions need light protection at 5°C to maintain integrity. While E-isomer in light-exposed product increased to 0.9% in 24 hours, light-protected product showed no change (25°C, 18 months). Infusate studies indicated that < 1.9% E-isomer will be dosed to patients and would likely convert to the Z-isomer, following administration. This report implies Z-E isomerism in SU5416 is controllable with no limitations towards ensuring pharmaceutical product quality.     

A Device for Generating Singly Charged Particles in the 0.1–1.0-μm Diameter Range

In this paper an aerosol charger that largely avoids the production of multiply charged particles in the 0.1–1.0 μm diameter range is described. The input aerosol is first passed through an electrostatic condenser to remove all charged particles and ions. The remaining neutral aerosol then flows into a 23-cm-long, 2.1-cm inner diameter cylindrical tube; the inner surface of this tube is uniformly coated with 0.09 μCi⁶³ Ni, a 0.067 MeV β-emitter with a half-life of 92 years. At typical airflow rates of 0.2–1.0 lpm, this low-activity source of ionizing radiation produces bipolar ion concentrations ranging from 1 × 10⁴ to 9 × 10⁴ ion/cm³, which is much lower than levels required to bring the aerosol to Boltzmann charge equilibrium. At a flow rate of 1.0 lpm, particles smaller than about 1.0 μm typically interact with no more than one ion en route through the charger. Therefore, particles at the charger exit are mostly either neutral or singly charged. Charge distributions of initially-neutral mono-disperse polystyrene latex particles were measured at the exit from the charger for particle diameters ranging in size from 0.09 to 1.09 μm. It was found that, at an airflow rate of 1.0 lpm and particle size 1.09 μm, the ratios of singly, doubly, and triply charged to total positively charged concentrations were 0.75, 0.19, and 0.06 respectively; particles with more than three charges were not detected. In contrast, the analogous charge ratio at Boltzmann equilibrium is 0.28 (+ 1), 0.24 (+ 2), 0.19 (+ 3), 0.13 (+ 4), 0.08 (+ 5), 0.05 (+ 6), and 0.7 (+ 02).