Synthesis and characterization of perfectly alternating polycarbonate‐polydimethylsiloxane multiblock copolymers possessing controlled block lengths

An array of perfectly alternating polycarbonate‐polydimethylsiloxane (PC‐PDMS) multiblock copolymers possessing systematic variations in block molecular weights were successfully produced by coupling preformed PC and PDMS telechelic oligomers using hydrosilylation. Based on gel permeation chromatography results, the multiblock copolymers were essentially void of the oligomeric precursors. Despite the relatively large difference in solubility parameter between PC and PDMS, the multiblock copolymers exhibited significant partial miscibility between the two phases. As expected, the degree of partial miscibility was dependent on the molecular weight of the blocks with the extent of partial miscibility increasing with decreasing block molecular weights. Morphological characterization using small angle X‐ray scattering showed that, at a given PC block molecular weight, the uniformity of the two phase morphology increased with increasing PDMS block molecular weight, which is consistent with a decrease in the extent of phase mixing with increasing PDMS block molecular weight. POLYM. ENG. SCI., 54:1648–1663, 2014. © 2013 Society of Plastics Engineers     

Summarization for termination: no return!

We propose a program analysis method for proving termination of recursive programs. The analysis is based on a reduction of termination to two separate problems: reachability of recursive programs, and termination of non-recursive programs. Our reduction works through a program transformation that modifies the call sites and removes return edges. In the new, non-recursive program, a procedure call may non-deterministically enter the procedure body (which means that it will never return) or apply a summary statement.     

Diffusion welding of aluminium alloy strengthened by Al2O3 particles through an Al/Cu multilayer foil

In the diffusion welding (DW) of difficult-to-deform materials (such as composites and intermetallics), the application of intermediate multilayer foils (MF), which have alternating layers of elements that form intermetallics, allows for production of a permanent joint under milder conditions. In this paper, the processes occurring in the joint zone (JZ) during DW of Al–5 wt.%Mg+27 wt.%Al₂O₃ composite material through the Al/Cu interlayer were studied. It was shown that, while heating of such a foil, phase transformations that are due to the reaction diffusion of elements, run in it. At MF heating under a continuously applied external load, the materials are plastically deformed. It is established that the intensity of foil plastic deformation at a specified load non-monotonically depends on temperature. It is shown that welding temperature is determined by the temperature at which MF can undergo superplastic flow under the impact of applied pressure. A mechanism of formation for a solid-phase joint of high-strength materials through interlayers based on the MF of intermetallic-forming elements is proposed.     

Experimental Study of Film Condensation of FC-72 Vapour on Disk-Shaped Fin

The results of activity made in the framework of preparation of the experiment SAFIR (Single fin condensAtion: FIlm local measuRements) of European Space Agency are presented. First prototype of the test cell has been developed and tested. Confocal technique has been adopted for condensate film thickness measurements. Experiments on condensation of the liquid FC-72 have been carried out. Average heat transfer coefficient has been measured in the range of 880–1440 W/m² K and compared to the Nusselt theory.     

Over-phase control of inverter multiphase AC linear drives

The over-phase control method of inverter multiphase (i.e. having number of phases more than four) AC linear drives is developed by the authors of this paper. Its application allows to improve considerably a number of the drive technical-and-economic characteristics (speed of response, reliability, mass-and-overall dimensions, etc.). This control method can be used not only in the field of electrical AC drives, but also in the systems for electromagnetic stirring of molten metals. In these systems the application of one of versions of the over-phase-control for multiphase inverter-fed linear stators allows to increase the intensity of electromagnetic stirring of molten metals by providing with continuous change of the quantity, space location, and configuration of the vortex areas in the metal mass during the process of the above-mentioned stirring.     

Pulsed electromagnetic attraction of sheet metals – Fundamentals and perspective applications

The paper is dedicated to the study of pulsed electromagnetic attraction processes which can deform ferromagnetic sheet metal materials such as low carbon steels using low frequency discharges. The analytical model based upon the solution of Maxwell equations explains that magnetic forces are prevailing over the Lorentz forces for low frequency discharges. For electromagnetic forming (EMF) processes employing ferromagnetic sheet metal blanks of low electrical conductivity with relatively slow electric discharges, the magnetic forces should be taken into account in order to achieve a correct representation of electromagnetic forces applied to the blank. An engineering estimate on the size of magneto-static forces and Lorentz-forces is the outcome of the analytical work. In addition to analytical work and validation of the proposed engineering estimate of attracting forces, a single turn coil is introduced which is more robust than previous designs with multiple frequencies and interrupted discharges. The simplified setup only requires a rather slow single frequency low voltage electric discharge which allows for using cheaper and longer life capacitors, substantially reduces the safety implications and also extends the life of the coil insulation.     

Determination of Activity Coefficients of Semi-Volatile Organic Aerosols Using the Integrated Volume Method

We demonstrate the use of the Integrated Volume Method (IVM) to estimate activity coefficients of semi-volatile organic compounds pertinent to ambient/atmospheric aerosols in binary mixtures. We generate binary solution aerosols with different mole fractions of individual components; for each mixture, we measure total change in aerosol volume upon heating from 25 ^○ C to 35 ^○ C, with the aerosols being at equilibrium in both states. The change in aerosol volume, or in other words, the partitioning between the particle phase and the gas phase, is used to determine activity coefficients of the compounds as a function of their mole fraction in the mixture. We demonstrate this method using the following four model systems. System 1: adipic acid–pimelic acid, which illustrates polar organic–polar organic interactions. Non-ideal behavior was observed with activity coefficients around three at infinite dilution. System 2: adipic acid–dioctyl sebacate, which illustrates polar organic–non-polar organic interactions. The compounds in this experiment did not form a solution. System 3: adipic acid–ammonium sulfate, which illustrates polar organic–inorganic interactions. The compounds in this experiment did not form a solution. System 4: adipic acid–ambient extracts, which illustrates the potential use of the method to study partitioning behavior of individual components in a complex matrix approximating that of real ambient aerosol. The measured activity coefficients of adipic acid were less than unity for the tested range of mixing ratios, indicating suppression of volatility of this compound in ambient organic matrix.     

Adsorption of methyl mercaptan on activated carbons

Activated carbons of different origins were studied as methyl mercaptan adsorbents in wet, dry, and oxidizing conditions. The materials were characterized using adsorption of nitrogen, Boehm titration, and thermal analysis. Investigation was focused on the feasibility of the removal of methyl mercaptan on activated carbons and on the role of surface chemistry and porosity in the adsorption/oxidation processes. The results showed relatively high capacities of carbons for removal of CH3SH. The amount adsorbed depends on the surface features. Methyl mercaptan, in general, is oxidized to disulfides, which, depending on the chemistry of the carbon surface, can be converted to sulfonic acid due to the presence of water and active radicals.